![Ubuntu 14.04 で起動時にすべてのユーザーの外付けハードディスクをマウントする](https://rvso.com/image/1048338/Ubuntu%2014.04%20%E3%81%A7%E8%B5%B7%E5%8B%95%E6%99%82%E3%81%AB%E3%81%99%E3%81%B9%E3%81%A6%E3%81%AE%E3%83%A6%E3%83%BC%E3%82%B6%E3%83%BC%E3%81%AE%E5%A4%96%E4%BB%98%E3%81%91%E3%83%8F%E3%83%BC%E3%83%89%E3%83%87%E3%82%A3%E3%82%B9%E3%82%AF%E3%82%92%E3%83%9E%E3%82%A6%E3%83%B3%E3%83%88%E3%81%99%E3%82%8B%20.png)
こんにちは。私は Ubuntu を初めて使用し、最近 14.04 LTS をインストールしました。起動時にすべてのユーザーの外付けハードドライブをマウントする際に問題が発生しています。たとえば、起動後にユーザー A としてログインすると、ユーザー A だけが外付けメディアにアクセスでき、他のユーザーはこれらの外付けメディアにアクセスできません。どなたか、この問題を解決するのを手伝っていただけませんか。
次のコマンドへの出力
sudo blkid
/dev/sda1: UUID="98715d8d-bf13-48f5-882e-36270c539c94" TYPE="ext4"
/dev/sda2: UUID="qOUDEc-qHDq-y9NL-OWCF-fO04-vnPI-8UNrtV" TYPE="LVM2_member"
/dev/sdb1: UUID="6ulNAl-1Hky-orpE-ntL2-Brgu-Qen1-BYqCIh" TYPE="LVM2_member"
/dev/mapper/VolGroup-lv_root: UUID="a7e84558-d5d3-43f3-8788-a483dde96fd8" TYPE="ext4"
/dev/mapper/VolGroup-lv_home: UUID="fb65cc75-ab1a-44a4-8f98-b1767d03f15a" TYPE="ext4"
/dev/mapper/VolGroup-lv_swap: UUID="69e3381b-a2b5-4866-81b6-bd368c9157d5" TYPE="swap"
/dev/sdc1: LABEL="ExtHDD04" UUID="0DFFA1CB15212E12" TYPE="ntfs"
/dev/sdd1: LABEL="ExtHDD03" UUID="485AA7713243CEFB" TYPE="ntfs"
/dev/sde1: UUID="485ef4bd-0093-42c5-a3e5-0090e68e93c1" TYPE="ext4"
/dev/sr1: LABEL="WD SmartWare" TYPE="udf"
/dev/sdg1: LABEL="ExtHDD01" UUID="00148BDE148BD4D6" TYPE="ntfs"
sudo fdisk -l
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc648a420
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 83 Linux
/dev/sda2 1026048 488280063 243627008 8e Linux LVM
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000617c8
Device Boot Start End Blocks Id System
/dev/sdb1 2048 3907028991 1953513472 8e Linux LVM
Disk /dev/mapper/VolGroup-lv_root: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders, total 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_root doesn't contain a valid partition table
Disk /dev/mapper/VolGroup-lv_home: 2168.7 GB, 2168656494592 bytes
255 heads, 63 sectors/track, 263657 cylinders, total 4235657216 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_home doesn't contain a valid partition table
Disk /dev/mapper/VolGroup-lv_swap: 27.5 GB, 27481079808 bytes
255 heads, 63 sectors/track, 3341 cylinders, total 53673984 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap doesn't contain a valid partition table
WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdc: 3000.6 GB, 3000558944256 bytes
255 heads, 63 sectors/track, 364797 cylinders, total 5860466688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdc1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sdd: 3000.6 GB, 3000558944256 bytes
255 heads, 63 sectors/track, 364797 cylinders, total 5860466688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdd1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sde: 3000.6 GB, 3000558944256 bytes
255 heads, 63 sectors/track, 364797 cylinders, total 5860466688 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sde1 1 4294967295 2147483647+ ee GPT
Partition 1 does not start on physical sector boundary.
Disk /dev/sdg: 1999.7 GB, 1999696297984 bytes
228 heads, 56 sectors/track, 305894 cylinders, total 3905656832 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe534f55f
Device Boot Start End Blocks Id System
/dev/sdg1 2048 3905656831 1952827392 7 HPFS/NTFS/exFAT
/etc/fstab をスキャンする
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/VolGroup-lv_root / ext4 errors=remount-ro 0 1
/dev/mapper/VolGroup-lv_home /home ext4 defaults 0 2
/dev/mapper/VolGroup-lv_swap none swap sw 0 0
答え1
起動時にすべてのユーザーに対してパーティションをマウントするには、fstab
ファイルにエントリが必要です。現在行われていることは、ログインしたユーザーに対して HDD がマウントされ、そのユーザーのみにアクセス権が付与されるというものです。fstab にエントリを追加することで、パーティションはすべてのユーザーに対してアクセス可能な状態でルートによってマウントされます。この r/w アクセスは後で制御できます。
sudo blkid
システムで利用可能なすべてのパーティションをリストします。UUID
起動時にマウントするNTFSパーティションの番号を書き留めてください。あなたの場合は、00148BDE148BD4D6
ここで、たとえば というフォルダを作成しますsudo mkdir /media/ExtHDD01
。これは、外付け HDD パーティションがマウントされるフォルダです。このフォルダは、root が所有します。他のユーザーにこのフォルダへの r/w 権限を与えるには、適切な権限を与える必要があります。これでchmod -R 777 /media/ExtHDD01
十分でしょう。次に、fstab ファイルを編集する必要があります。これを行うには、次のコマンドを入力します。
sudo nano /etc/fstab
ファイルの一番下に移動し、そこに次の行を追加します。
UUID=00148BDE148BD4D6 /media/ExtHDD01/ ntfs-3g auto,user,rw 0 0
システムを再起動すれば、準備完了です。任意の数の HDD に対して同じ手順を実行できます。
答え2
GUI方式
ドライブを接続します。
Disks
デスクトップファインダー(またはsudo gnome-disks
ターミナル)で左の列で正しいディスクを選択します。
歯車アイコンをクリック
選択する
edit mount options
振り向く
off
両方をチェックし
mount at startup
、show user interface
それでおしまい!
答え3
私も最近同じ状況に陥りましたが、解決策を見つけました。
ADMIN と DESKTOP USER という 2 人のユーザーがいて、それぞれのログイン時に STORAGE というラベルの付いた同じドライブをマウントしたいので、次の操作を行います。
ファイルに/etc/fstab
次のエントリを追加する必要がありました:
LABEL=STORAGE /media/$USER/STORAGE auto nosuid,nodev,nofail,x-gvfs-show 0 0
注目すべき点は、環境変数の使用です$USER
。
これはUbuntu 16.04用で、新しいドライブは/media/<username>/<drive-label>
の代わりに UUID を使用することもできます<drive-label>
。