皆さん、私はUSBマウントに苦労しています。私が持っているものは次のとおりです。
- 外付け USB ドライブ、NTFS、Windows で使用。空ではない
これまでやったこと:
- 主に、usbmount、udev、autofs でいくつか試してみました:https://linuxconfig.org/automatically-mount-usb-external-drive-with-autofs
今のところ、USB デバイスをマウントすると (自動または手動で試した場合)、マウント フォルダーが空として表示されます。
martin@cmserver:/media/usb0$ ls -l
total 0
ログによると、usbmount が完了してデバイスがマウントされたようです。
Mar 12 22:54:30 cmserver kernel: [ 5751.681507] scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 0915 PQ: 0 ANSI: 6
Mar 12 22:54:30 cmserver kernel: [ 5751.682778] sd 6:0:0:0: Attached scsi generic sg3 type 0
Mar 12 22:54:30 cmserver mtp-probe: checking bus 5, device 5: "/sys/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb5/5-2"
Mar 12 22:54:30 cmserver mtp-probe: bus: 5, device: 5 was not an MTP device
Mar 12 22:54:30 cmserver mtp-probe: checking bus 5, device 5: "/sys/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/usb5/5-2"
Mar 12 22:54:30 cmserver mtp-probe: bus: 5, device: 5 was not an MTP device
Mar 12 22:54:44 cmserver kernel: [ 5765.776961] sd 6:0:0:0: [sdd] 15628053167 512-byte logical blocks: (8.00 TB/7.28 TiB)
Mar 12 22:54:44 cmserver kernel: [ 5765.776964] sd 6:0:0:0: [sdd] 4096-byte physical blocks
Mar 12 22:54:44 cmserver kernel: [ 5765.777122] sd 6:0:0:0: [sdd] Write Protect is off
Mar 12 22:54:44 cmserver kernel: [ 5765.777124] sd 6:0:0:0: [sdd] Mode Sense: 53 00 00 08
Mar 12 22:54:44 cmserver kernel: [ 5765.777421] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar 12 22:54:44 cmserver kernel: [ 5765.778521] sd 6:0:0:0: [sdd] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
Mar 12 22:54:45 cmserver kernel: [ 5766.164639] sdd: sdd1 sdd2
Mar 12 22:54:45 cmserver kernel: [ 5766.167097] sd 6:0:0:0: [sdd] Attached SCSI disk
Mar 12 22:54:45 cmserver multipath: sdd: can't store path info
Mar 12 22:54:45 cmserver usbmount[42190]: loaded usbmount configurations
Mar 12 22:54:45 cmserver usbmount[42190]: trying to acquire lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42190]: acquired lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42190]: /dev/sdd does not contain a filesystem or disklabel
Mar 12 22:54:45 cmserver systemd-udevd[42167]: sdd: Process '/usr/share/usbmount/usbmount add' failed with exit code 1.
Mar 12 22:54:45 cmserver multipathd[652]: uevent trigger error
Mar 12 22:54:45 cmserver usbmount[42231]: loaded usbmount configurations
Mar 12 22:54:45 cmserver usbmount[42231]: trying to acquire lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42231]: acquired lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42231]: /dev/sdd1 does not contain a filesystem or disklabel
Mar 12 22:54:45 cmserver systemd-udevd[42167]: sdd1: Process '/usr/share/usbmount/usbmount add' failed with exit code 1.
Mar 12 22:54:45 cmserver usbmount[42267]: loaded usbmount configurations
Mar 12 22:54:45 cmserver usbmount[42267]: trying to acquire lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42267]: acquired lock /var/run/usbmount/.mount.lock
Mar 12 22:54:45 cmserver usbmount[42267]: /dev/sdd2 contains filesystem type ntfs
Mar 12 22:54:45 cmserver usbmount[42267]: mountpoint /media/usb0 is available for /dev/sdd2
Mar 12 22:54:45 cmserver usbmount[42267]: executing command: mount -tntfs -osync,noexec,nodev,noatime,nodiratime /dev/sdd2 /media/usb0
Mar 12 22:54:47 cmserver ntfs-3g[42300]: Version 2017.3.23AR.3 integrated FUSE 28
Mar 12 22:54:47 cmserver ntfs-3g[42300]: Mounted /dev/sdd2 (Read-Write, label "Dagobert", NTFS 3.1)
Mar 12 22:54:47 cmserver ntfs-3g[42300]: Cmdline options: rw,sync,noexec,nodev,noatime,nodiratime
Mar 12 22:54:47 cmserver ntfs-3g[42300]: Mount options: sync,noexec,nodev,nodiratime,allow_other,nonempty,noatime,rw,fsname=/dev/sdd2,blkdev,blksize=4096
Mar 12 22:54:47 cmserver ntfs-3g[42300]: Ownership and permissions disabled, configuration type 7
Mar 12 22:54:47 cmserver usbmount[42267]: executing command: run-parts /etc/usbmount/mount.d
Mar 12 22:54:47 cmserver usbmount[42267]: usbmount execution finished
ここの行は私には良さそうです:
executing command: mount -tntfs -osync,noexec,nodev,noatime,nodiratime /dev/sdd2 /media/usb
/media の ls -l は次を表示します:
lrwxrwxrwx 1 root root 4 Mar 5 21:00 usb -> usb0
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb0
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb1
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb2
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb3
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb4
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb5
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb6
drwxr-xr-x 2 root root 4096 Mar 5 21:00 usb7
そこで、USBドライブ上のファイルやフォルダを表示する方法についてのヘルプを探しています