最近新しい PC を購入したのですが、Debian システムを適切にインストールできません。ここでは、私の設定と状況をできるだけ詳しくご説明します。
パソコン:
- CPU: i7 7700K (Kaby Lake、Intel HD グラフィックス 630 搭載)
- MB: MSi Z270 SLI プラス
- RAM: Kingston HYPER 2x8GB RAM @ 2400MHz (12CL)
- SSD: インテル 600 256GB
ディストリビューション:
Debian GNU/Linux 8.7 ジェシー
システムのインストール後、OS は正常に起動しましたが、xserver は低解像度 (1024x768) でしか実行されませんでした。
ドライバの問題だと思い、ここからいくつかのドライバをインストールしましたサイト成功しなかったので、いくつかの新しいカーネルを試しました:
- 3.16.43X
- 3.18.20 X
- 4.1.39X
- 4.4.59X
- 4.9.20 メートル
- 4.10.8 メートル
- 4.11-rc5M
X 記号の付いたカーネル (上記参照) では状況は元のカーネルと同じでしたが3.16.0-4、M 記号の付いたカーネルでは状況が異なりました。適切な解像度で起動したように見えましたが、xserver がクラッシュし、次の/var/log/Xorg.0.logメッセージが表示されました。
画面は見つかりましたが、使用可能な構成がありません
その後
致命的なサーバーエラー: 画面が見つかりません
xorgi915モジュールの設定や構成を変更しようとしましたが、成功しませんでした
ご協力いただければ幸いです
ありがとう！
編集：
手動でインストールしたカーネルをすべて削除し、jessie-backports からカーネル 4.9 をインストールしてxserver-xorg-video-intelドライバーを削除した後、コマンド:
grep EE /var/log/Xorg.0.log
戻ります
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.670] (EE) Failed to load module "intel" (module does not exist, 0)
[ 2.671] (EE) open /dev/dri/card0: No such file or directory
[ 2.671] (EE) open /dev/dri/card0: No such file or directory
[ 2.672] (EE) open /dev/fb0: No such file or directory
[ 2.672] (EE) open /dev/fb0: No such file or directory
[ 2.672] (EE) Screen 0 deleted because of no matching config section.
[ 2.672] (EE) Screen 0 deleted because of no matching config section.
[ 2.672] (EE) Screen 0 deleted because of no matching config section.
[ 2.672] (EE) Device(s) detected, but none match those in the config file.
[ 2.672] (EE)
[ 2.672] (EE) no screens found(EE)
[ 2.672] (EE)
[ 2.672] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2.672] (EE)
[ 2.672] (EE) Server terminated with error (1). Closing log file.
編集2:
全体/var/log/Xorg.0.log：
[ 2.630] X Protocol Version 11, Revision 0
[ 2.630] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2.630] Current Operating System: Linux Bobor 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64
[ 2.630] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=97e2dfda-29d2-44b4-ac08-80ea49496bb6 ro quiet
[ 2.630] Build Date: 11 February 2015 12:32:02AM
[ 2.630] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 2.630] Current version of pixman: 0.32.6
[ 2.630] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.630] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.630] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 9 19:23:09 2017
[ 2.631] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.632] (==) No Layout section. Using the first Screen section.
[ 2.632] (==) No screen section available. Using defaults.
[ 2.632] (**) |-->Screen "Default Screen Section" (0)
[ 2.632] (**) | |-->Monitor "<default monitor>"
[ 2.632] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.632] (==) Automatically adding devices
[ 2.632] (==) Automatically enabling devices
[ 2.632] (==) Automatically adding GPU devices
[ 2.634] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2.634] Entry deleted from font path.
[ 2.636] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2.636] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.636] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.636] (II) Loader magic: 0x559d23f1ed80
[ 2.636] (II) Module ABI versions:
[ 2.636] X.Org ANSI C Emulation: 0.4
[ 2.636] X.Org Video Driver: 18.0
[ 2.636] X.Org XInput driver : 21.0
[ 2.636] X.Org Server Extension : 8.0
[ 2.637] (--) PCI:*(0:0:2:0) 8086:5912:1462:7a59 rev 4, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 2.637] (II) LoadModule: "glx"
[ 2.638] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.644] (II) Module glx: vendor="X.Org Foundation"
[ 2.644] compiled for 1.16.4, module version = 1.0.0
[ 2.644] ABI class: X.Org Server Extension, version 8.0
[ 2.644] (==) AIGLX enabled
[ 2.644] (==) Matched intel as autoconfigured driver 0
[ 2.644] (==) Matched modesetting as autoconfigured driver 1
[ 2.644] (==) Matched fbdev as autoconfigured driver 2
[ 2.644] (==) Matched vesa as autoconfigured driver 3
[ 2.644] (==) Assigned the driver to the xf86ConfigLayout
[ 2.644] (II) LoadModule: "intel"
[ 2.645] (WW) Warning, couldn't open module intel
[ 2.645] (II) UnloadModule: "intel"
[ 2.645] (II) Unloading intel
[ 2.645] (EE) Failed to load module "intel" (module does not exist, 0)
[ 2.645] (II) LoadModule: "modesetting"
[ 2.645] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2.646] (II) Module modesetting: vendor="X.Org Foundation"
[ 2.646] compiled for 1.16.4, module version = 0.9.0
[ 2.646] Module class: X.Org Video Driver
[ 2.646] ABI class: X.Org Video Driver, version 18.0
[ 2.646] (II) LoadModule: "fbdev"
[ 2.646] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2.646] (II) Module fbdev: vendor="X.Org Foundation"
[ 2.646] compiled for 1.15.99.904, module version = 0.4.4
[ 2.646] Module class: X.Org Video Driver
[ 2.646] ABI class: X.Org Video Driver, version 18.0
[ 2.646] (II) LoadModule: "vesa"
[ 2.646] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2.646] (II) Module vesa: vendor="X.Org Foundation"
[ 2.646] compiled for 1.15.99.904, module version = 2.3.3
[ 2.646] Module class: X.Org Video Driver
[ 2.646] ABI class: X.Org Video Driver, version 18.0
[ 2.646] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2.646] (II) FBDEV: driver for framebuffer: fbdev
[ 2.646] (II) VESA: driver for VESA chipsets: vesa
[ 2.646] (++) using VT number 7
[ 2.647] (EE) open /dev/dri/card0: No such file or directory
[ 2.647] (WW) Falling back to old probe method for modesetting
[ 2.647] (EE) open /dev/dri/card0: No such file or directory
[ 2.647] (II) Loading sub module "fbdevhw"
[ 2.647] (II) LoadModule: "fbdevhw"
[ 2.647] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2.647] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2.647] compiled for 1.16.4, module version = 0.0.2
[ 2.647] ABI class: X.Org Video Driver, version 18.0
[ 2.647] (EE) open /dev/fb0: No such file or directory
[ 2.647] (WW) Falling back to old probe method for fbdev
[ 2.647] (II) Loading sub module "fbdevhw"
[ 2.647] (II) LoadModule: "fbdevhw"
[ 2.647] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2.647] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2.647] compiled for 1.16.4, module version = 0.0.2
[ 2.647] ABI class: X.Org Video Driver, version 18.0
[ 2.647] (EE) open /dev/fb0: No such file or directory
[ 2.647] vesa: Ignoring device with a bound kernel driver
[ 2.647] (WW) Falling back to old probe method for vesa
[ 2.647] (EE) Screen 0 deleted because of no matching config section.
[ 2.647] (II) UnloadModule: "modesetting"
[ 2.647] (EE) Screen 0 deleted because of no matching config section.
[ 2.647] (II) UnloadModule: "fbdev"
[ 2.647] (II) UnloadSubModule: "fbdevhw"
[ 2.647] (EE) Screen 0 deleted because of no matching config section.
[ 2.647] (II) UnloadModule: "vesa"
[ 2.647] (EE) Device(s) detected, but none match those in the config file.
[ 2.647] (EE)
Fatal server error:
[ 2.647] (EE) no screens found(EE)
[ 2.647] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2.647] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2.647] (EE)
[ 2.647] (EE) Server terminated with error (1). Closing log file.
答え1
Kaby Lake (および Broadwell 以降のすべての Intel グラフィックス) の場合、Jessie バックポートから新しいカーネルとファームウェアをインストールする必要があります。ルートとして:
echo deb http://http.debian.net/debian jessie-backports main contrib non-free > /etc/apt/sources.list.d/jessie-backports.list
apt-get update
apt-get -t jessie-backports install linux-image-amd64 firmware-misc-nonfree
また、取り除く（逆説的に）X.org Intelビデオドライバ（パッケージの説明: X サーバーは、別のビデオ ドライバーなしでカーネルのモード設定機能を使用できます):
apt-get remove xserver-xorg-video-intel
これを実行すると、apt-get他のパッケージが削除されるというメッセージが表示される場合がありますが、削除しないでください。xserver-xorg-video-dummy依存関係を満たすためにインストールが必要になる場合があります。
手動でインストールしたカーネルも削除する必要があります。
すべて完了したら、再起動するとシステムの動作が大幅に改善されるはずです。
それでも失敗した場合は、代わりにバックポートされた Intel ドライバー (新しいカーネルとファームウェアと共に) をインストールしてみてください。
apt-get -t jessie-backports install xserver-xorg-video-intel
答え2
Debian Buster Intel グラフィックスの問題:
1) Display cannot wake up after sleeping
2) The whole the computer is suddenly freezing and overheating from time to time
3) dmesg shows below errors:
firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2)
Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
コンピュータの詳細:
user@debian-buster:~$ cat /proc/cpuinfo | grep 'model name'
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
model name : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
user@debian-buster:~$
AMI BIOSを搭載した中国製マザーボード「GKBR1-VERC」：
user@debian-buster:~$ sudo dmidecode -t 2
dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Default string
Product Name: Default string
Version: Default string
Serial Number: Default string
Asset Tag: Default string
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Default string
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
BIOSバージョン:
user@debian-buster:~$ sudo dmidecode --type bios
dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 5.12
Release Date: 07/01/2018
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 16 MB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 5.12
Handle 0x004B, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
user@debian-buster:~$
Intel 統合グラフィックス:
user@debian-buster:~$ lspci -kk | grep -A3 VGA
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
Subsystem: Intel Corporation UHD Graphics 620
Kernel driver in use: i915
Kernel modules: i915
user@debian-buster:~$
カーネル：
user@debian-buster:~/OS/deb/firmware$ uname -r
4.19.0-8-amd64
user@debian-buster:~/OS/deb/firmware$
ソリューション：
次のパッケージをインストールします。
xserver-xorg-video-intel
次の xorg 構成ファイルを作成します。
user@debian-buster:~$ cat /etc/X11/xorg.conf.d/10-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Endsection
user@debian-buster:~$
以下のディレクトリを作成します。
user@debian-buster:~$ ls -ld /lib/firmware/i915
drwxr-xr-x 2 root root 4096 Mar 20 21:01 /lib/firmware/i915
user@debian-buster:~$
以下の非フリー パッケージを Debian リポジトリからダウンロードします。
firmware-misc-nonfree_20190114-2_all.deb
パッケージを解凍し、不足しているファームウェアを見つけます。
dpkg -x firmware-misc-nonfree_20190114-2_all.deb .
user@debian-buster:~/OS/deb/firmware$ find | grep kbl_dmc_ver1_04.bin
./lib/firmware/i915/kbl_dmc_ver1_04.bin
user@debian-buster:~/OS/deb/firmware$
ファームウェアを /lib/firmware/i915/ ディレクトリに配置します。
sudo cp ./lib/firmware/i915/kbl_dmc_ver1_04.bin /lib/firmware/i915/
現在のカーネルまたはすべてのカーネルの initramfs を更新します。
sudo update-initramfs -u -k all
再起動後、ファームウェアがロードされるはずです。
user@debian-buster:~/OS/deb/firmware$ sudo dmesg | grep kbl
[sudo] password for user:
[ 0.016859] ACPI: SSDT 0x000000007F7E1F68 000724 (v02 INTEL xh_kbl-r 00000000 INTL 20160422)
[ 3.942920] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 3.943311] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
user@debian-buster:~/OS/deb/firmware$
フリーズがなくなり、マウスやキーボードに触れるとディスプレイが正しく起動するようになりました。