MacOS で管理者設定へのアクセスを回復するにはどうすればよいですか? (sudo コマンドは機能します)

MacOS で管理者設定へのアクセスを回復するにはどうすればよいですか? (sudo コマンドは機能します)

最近パスワードを変更し、Big Sur にアップグレードして MDM を有効にしたところ、UI で管理者設定にアクセスする際に問題が発生しました。

私はまだsudoアクセスを持っているのでコマンドラインで。

ただし、管理 UI でロックを解除することはできません。<- 問題。

私は愚かにも、2 番目の管理者ユーザーを作成しませんでした。

CLI から管理者アクセスを更新する方法はありますか?

これに適したスタックエクスタンジはありますか?

答え1

これは、Intel プロセッサを搭載した MacBook での Big Sur へのアップグレードであることが判明しました。

SMC をリセットする必要がありました。すべてのボタンを正しく押すまでに、以下の手順を 3 回実行する必要がありました。

https://support.apple.com/ja-jp/HT201295 翻訳元

要求に応じて手順をコピーして貼り付けます:

T2チップを搭載したノートパソコン

SMC をリセットする前に、次の手順を試してください。

Shut down your Mac.
Press and hold the power button for 10 seconds, then release the button.
Wait a few seconds, then press the power button to turn on your Mac.

問題が解決しない場合は、次の手順に従って SMC をリセットしてください。

Shut down your Mac.
On your built-in keyboard, press and hold all of the following keys. Your Mac might turn on.
    Control  on the left side of your keyboard
    Option (Alt)  on the left side of your keyboard
    Shift  on the right side of your keyboard
Keep holding all three keys for 7 seconds, then press and hold the power button as well. If your Mac is on, it will turn off as you hold the keys.
Keep holding all four keys for another 7 seconds, then release them.
Wait a few seconds, then press the power button to turn on your Mac.

T2チップを搭載したデスクトップコンピュータ

Shut down your Mac, then unplug the power cord.
Wait 15 seconds, then plug the power cord back in.
Wait 5 seconds, then press the power button to turn on your Mac.

他のコンピュータのSMCをリセットする

MacにApple T2セキュリティチップが搭載されていない場合は、以下の手順に従ってください。サポートが必要な場合は、Appleサポートにお問い合わせください。取り外し不可能なバッテリーを搭載したノートパソコン

これは、2009 年中頃から 2017 年にかけて導入された MacBook Pro モデル、2017 年以前に導入された MacBook Air モデル、および MacBook (13 インチ、2009 年中頃) を除くすべての MacBook モデルに適用されます。

Shut down your Mac.
On your built-in keyboard, press and hold all of these keys:
    Shift  on the left side of your keyboard
    Control  on the left side of your keyboard
    Option (Alt)  on the left side of your keyboard
While holding all three keys, press and hold the power button as well.
Notebook keyboard with all 4 keys pressed
Keep holding all four keys for 10 seconds.
Release all keys, then press the power button to turn on your Mac.

関連情報