Windows メディア作成ツールを使用して、Windows を USB にインストールしました。システム内の 120 GB SSD に Windows をインストールしました。その SSD の他に、他の 3 つの SSD と 2 つの 12 TB Western Digital Pro HDD があります。2 つの HDD のうちの 1 つ、つまりほとんどのデータが入っているプライマリ ドライブが NTFS でフォーマットされ、データにアクセスできなくなりました。2 番目のドライブにも何かが行われたようですが、そのドライブのデータにはまだアクセスできます。Windows がなぜこのようなことをしたのか本当にわかりません。Windows を使用している間はドライブに触れたことがありません。データ回復ツールを使用する必要がありますか、それともドライブのフォーマット ヘッダーを置き換えるだけでよい方法がありますか? ドライブに関する関連情報は次のとおりです。
fdisk /dev/sdX
両方のドライブでエラーが発生します:The size of this disk is 10.9 TiB (12000138625024 bytes). DOS partition table format cannot be used on drives for volumes larger than 2199023255040 bytes for 512-byte sectors. Use GUID partition table format (GPT).
以下のみ/dev/sdb
を提供します:The old ext4 signature will be removed by a write command.
Primary Drive
Disk /dev/sda: 10.9 TiB, 12000138625024 bytes, 23437770752 sectors
Disk model: WDC WD121KFBX-68
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x12da48b1
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 104447 102400 50M 7 HPFS/NTFS/exFAT
Secondary Drive
Disk /dev/sdb: 10.9 TiB, 12000138625024 bytes, 23437770752 sectors
Disk model: WDC WD121KFBX-68
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0b76fd8b