
私は小さなネットワークを持っています。
実際の IP と DNS 名を使用してインターネット (WAN) に接続されたファイアウォールがあり、内部ネットワーク (LAN) の DHCP サーバーとしても機能します。ファイアウォール マシンで、LAN にあるサイト サーバーのポート転送を設定しました。以下は私の設定です
nftables.conf
。
#!/usr/sbin/nft -f
flush ruleset
define lan = eth0
define wan = eth1
define lan_addresses = 192.168.100.0/24
define server_address = 192.168.100.2
define server_http_port = 80
define server_https_port = 443
table firewall {
map hosts {
type ipv4_addr . ether_addr : verdict
elements = {
192.168.100.2 . 30:01:ED:BD:6B:CB : accept , # SERVER
192.168.100.3 . 30:01:ED:BD:6B:C1 : accept , # CLIENT
}
}
set remote_allowed {
type ipv4_addr
elements = { 91.198.174.192 , 209.51.188.148 }
}
chain prerouting {
type nat hook prerouting priority 0; policy accept;
# server
iifname $wan ip protocol tcp tcp dport $server_http_port log prefix "Server HTTP Prerouted " dnat $server_address:$server_http_port
iifname $wan ip protocol tcp tcp dport $server_https_port log prefix "Server HTTPS Prerouted " dnat $server_address:$server_https_port
}
chain postrouting {
type nat hook postrouting priority 100; policy accept;
ip saddr $lan_addresses oifname $wan masquerade
# server
iifname $wan ip protocol tcp ip saddr $server_address tcp sport $server_http_port log prefix "Server HTTP Postrouted " masquerade
iifname $wan ip protocol tcp ip saddr $server_address tcp sport $server_https_port log prefix "Server HTTPS Postrouted " masquerade
}
chain input {
type filter hook input priority 0; policy drop;
# drop invalid, allow established
ct state vmap {invalid : drop, established : accept, related : accept}
# allow loopback
iifname "lo" accept
# allow ping from LAN
iifname $lan ip saddr $lan_addresses ip protocol icmp icmp type echo-request accept
# allow SSH from LAN
iifname != $wan ip protocol tcp tcp dport 22 accept
# allow SSH from allowed remotes
iifname $wan ip protocol tcp ip saddr @remote_allowed tcp dport 22 accept
# open SQUID, DHCP port for lan
iifname $lan ip protocol tcp ip saddr $lan_addresses tcp dport {3128, 67} accept
# LAN nice reject
iifname != $wan ip saddr $lan_addresses reject with icmp type host-prohibited
}
chain forward {
type filter hook forward priority 0; policy drop;
ct state {established,related} accept
# server
iifname $wan ip protocol tcp ip daddr $server_address tcp dport $server_http_port log prefix "Server HTTP Forwarded To " accept
iifname $lan ip protocol tcp ip saddr $server_address tcp sport $server_http_port log prefix "Server HTTP Forwarded From " accept
iifname $wan ip protocol tcp ip daddr $server_address tcp dport $server_https_port log prefix "Server HTTPS Forwarded To " accept
iifname $lan ip protocol tcp ip saddr $server_address tcp sport $server_https_port log prefix "Server HTTPS Forwarded From " accept
# only allow selected machines to access internet
iifname $lan oifname $wan ip saddr . ether saddr vmap @hosts
iifname $lan oifname $wan reject
}
chain output {
type filter hook output priority 0; policy accept;
}
}
この設定は、LAN からサーバーにアクセスしない限り正常に動作しますが、その場合は
No route to host
エラーが発生します。
> ping 192.168.100.1 # OK
> ping example.com # OK
> curl http://192.168.100.2 # OK
> curl http://192.168.100.1 # `No route to host`
> curl http://93.184.216.34 # `No route to host`
> curl http://example.com # `No route to host`
ファイアウォールの IP または DNS 名を使用して LAN サーバーにアクセスできるように、netfilter 構成を変更するにはどうすればよいですか?
PS 適切に設定するためにこれが必要ですジツィミート 会議の録画ジガシサイトの URL を使用して会議に接続します。
PPS この構成では、指定されたクライアントに対してのみ無制限のインターネット アクセスが許可されます。
答え1
ファイアウォールの設定を変更することなく、この問題を解決することができました。クライアント ファイルにローカル サーバーのアドレスと DNS 名のエントリを追加しました/etc/hosts
。
192.168.100.3 example.com
DHCP サーバーによってブロードキャストされる可能性もあると思います。