次の mwe では、円形のオームの式の図をさらに右に配置し、図の下部を質問 4 の選択肢 D に揃えたいと思います。質問の間に空白スペースは不要です。コマンドを\includegraphicsリスト環境内およびリスト環境なしで移動すると、奇妙な動作も発生します。
私はもう試した
\newlength{\oldparindent} \setlength{\oldparindent}{\parindent}% Save \parindent
\setbox0=\hbox{\includegraphics[width=0.17\textwidth]{ohm_law}}% Original image
\noindent\begin{minipage}[t]{0.6\textwidth}
\end{minipage}\hfill
\begin{minipage}[t]{0.17\textwidth}
\raisebox{-\ht0}{\usebox0}% Insert image
\end{minipage}
どこかで見つけたものです。図を右に移動し、質問を離して配置し、左側に空白を残します。解決策は minipage だと思いますが、どのようにすればよいでしょうか?
これが mwe です:
\documentclass[12pt,letterpaper,addpoints]{exam}
\usepackage{geometry}
\usepackage{float}
%\usepackage[scaled=1.05,proportional,lightcondensed]{zlmtt}
\usepackage{graphicx} %needed to include pictures (png)
\usepackage{tabularx}%\usepackage{lmodern}
\usepackage[T1]{fontenc}
\usepackage{inconsolata}
\renewcommand*\familydefault{\ttdefault} %% Only if the base font of the document is to be typewriter style
\extraheadheight[-1.25in]{-0.25in}
\extrafootheight{-1in}
\begin{document}
%\printanswers %uncomment and re-compile to print answer key
\pagestyle{headandfoot}
\runningheadrule
\lhead{}
\chead[]{Electrical Systems 20 Exam(continued)}
\rhead{}
\title{Electrical Systems 20 \\\textsc{Exam}}
\date{}
\maketitle
\textsc{NAME}\enspace\makebox[3in]{\hrulefill}
\textsc{DATE}\enspace\makebox[1.5in]{\hrulefill}
\fullwidth{}
\vspace{0.1in}
%\fullwidth{\large \textbf{1) Multiple Choices}}
\begin{center}
\fbox{\fbox{\parbox{5.5in}{\centering
\textsc {Choose the \emph{most correct} answer from the choices given.}}}}
\end{center}
\vspace{0.1in}
\begin{questions}
\boxedpoints
\pointsinrightmargin
\question[1]Automotive wiring diagrams include
\begin{choices}
\choice A series of colour coded diagrams
\choice Specific symbols to identify components
\choice Wire gauge sizes
\correctchoice All of the above
\end{choices}
\question[1]When soldering an electrical connection, use
\begin{choices}
\choice Acid core flux
\correctchoice Rosin core flux
\choice A or B
\choice Neither A or B
\end{choices}
\question[1]An electrical component that allows current to flow in one
direction only is called
\begin{choices}
\choice Watt
\choice Anode
\choice Cathode
\CorrectChoice Diode
\end{choices}
\question[1]Ohm's law states that
\includegraphics[width=2.0cm]{ohm_law} %started with this
\begin{choices}
\choice $1\ volt = 1\ amp \times 1 \Omega$
\choice $1\ amp = \frac{1\ volt}{1 \Omega}$
\choice $1 \Omega = \frac{1\ volt}{1\ amp}$
\CorrectChoice All of the above are true.
\end{choices}
\question[1] In a parallel circuit,
\begin{choices}
\choice the voltage is the same throughout the circuit, but the
current is divided.
\choice The total circuit resistance is always less than the smallest
resistor in the circuit.
\choice there is more than one path for current to flow.
\CorrectChoice All of the above are true.
\end{choices}
\question[1] An electronic device which acts like a high speed switch
is a
\begin{choices}
\choice triode
\choice diode
\choice monode
\correctchoice transistor
\end{choices}
\end{questions}
\end{document} here
答え1
次のようなマクロを定義できます:
\newcommand\myimage[2][width=2cm]{%
\hfill\makebox[0pt][r]{\raisebox{-\height}[0pt][0pt]{\includegraphics[#1]{#2}}}
}
そしてそれを次のように使う
\question[1]Ohm's law states that\myimage[width=3cm]{example-image}
\begin{choices}
\choice $1\ volt = 1\ amp \times 1 \Omega$
\choice $1\ amp = \frac{1\ volt}{1 \Omega}$
\choice $1 \Omega = \frac{1\ volt}{1\ amp}$
\CorrectChoice All of the above are true.
\end{choices}
完全なコード:
\documentclass[12pt,letterpaper,addpoints]{exam}
\usepackage{geometry}
\usepackage{float}
%\usepackage[scaled=1.05,proportional,lightcondensed]{zlmtt}
\usepackage{graphicx} %needed to include pictures (png)
\usepackage{tabularx}%\usepackage{lmodern}
\usepackage[T1]{fontenc}
\usepackage{inconsolata}
\renewcommand*\familydefault{\ttdefault} %% Only if the base font of the document is to be typewriter style
\extraheadheight[-1.25in]{-0.25in}
\extrafootheight{-1in}
\newcommand\myimage[2][width=2cm]{%
\hfill\makebox[0pt][r]{\raisebox{-\height}[0pt][0pt]{\includegraphics[#1]{#2}}}
}
\begin{document}
%\printanswers %uncomment and re-compile to print answer key
\pagestyle{headandfoot}
\runningheadrule
\lhead{}
\chead[]{Electrical Systems 20 Exam(continued)}
\rhead{}
\title{Electrical Systems 20 \\\textsc{Exam}}
\date{}
\maketitle
\textsc{NAME}\enspace\makebox[3in]{\hrulefill}
\textsc{DATE}\enspace\makebox[1.5in]{\hrulefill}
\fullwidth{}
\vspace{0.1in}
%\fullwidth{\large \textbf{1) Multiple Choices}}
\begin{center}
\fbox{\fbox{\parbox{5.5in}{\centering
\textsc {Choose the \emph{most correct} answer from the choices given.}}}}
\end{center}
\vspace{0.1in}
\begin{questions}
\boxedpoints
\pointsinrightmargin
\question[1]Automotive wiring diagrams include
\begin{choices}
\choice A series of colour coded diagrams
\choice Specific symbols to identify components
\choice Wire gauge sizes
\correctchoice All of the above
\end{choices}
\question[1]When soldering an electrical connection, use
\begin{choices}
\choice Acid core flux
\correctchoice Rosin core flux
\choice A or B
\choice Neither A or B
\end{choices}
\question[1]An electrical component that allows current to flow in one
direction only is called
\begin{choices}
\choice Watt
\choice Anode
\choice Cathode
\CorrectChoice Diode
\end{choices}
\question[1]Ohm's law states that\myimage[width=3cm]{example-image}
%\hfill\makebox[0pt][r]{\raisebox{-\height}[0pt][0pt]{\includegraphics[width=3.0cm]{example-image}}} %started with this}
\begin{choices}
\choice $1\ volt = 1\ amp \times 1 \Omega$
\choice $1\ amp = \frac{1\ volt}{1 \Omega}$
\choice $1 \Omega = \frac{1\ volt}{1\ amp}$
\CorrectChoice All of the above are true.
\end{choices}
\question[1] In a parallel circuit,
\begin{choices}
\choice the voltage is the same throughout the circuit, but the
current is divided.
\choice The total circuit resistance is always less than the smallest
resistor in the circuit.
\choice there is more than one path for current to flow.
\CorrectChoice All of the above are true.
\end{choices}
\question[1] An electronic device which acts like a high speed switch
is a
\begin{choices}
\choice triode
\choice diode
\choice monode
\correctchoice transistor
\end{choices}
\end{questions}
\end{document}
補足として、siunitx入力単位の設定にはパッケージの使用を検討してください。単位の入力が簡単で\SI{1}{\ampere}、間隔もすべて正確です。