☰

ブロックと箇条書きの間隔の組み合わせ

tag-icon • tag-icon tikz-pgf spacing shapes
ブロックと箇条書きの間隔の組み合わせ

私は2番目のTikzモデルを作ろうとしています。TikZ: パーセプトロンの図初心者としての知識と実験に基づいて修正できましたが、足りない部分があり、弾丸の作り方がわかりません。距離を小さくしようとしていますが、効果がありません。試してみましたが、distance node = 1 em今のところうまくいきません。私の問題に対する解決策はありますか? 出力のサンプルが提供されています。出力ご提案があれば、ぜひお聞かせください。

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,calc} % braces {}
\usetikzlibrary{shapes,arrows,positioning}
\usepackage{pgfplots}
\pgfplotsset{compat=1.8}

\begin{document}

\tikzset{
 block/.style={
  draw, 
  rectangle, 
  minimum height=2em, 
  minimum width=5em,
 },
 sum/.style={
  draw, 
  circle, 
  minimum size=2em
 },
 input/.style={coordinate}, 
 output/.style={coordinate},
 mytext/.style={
  draw,
  text depth=4pt,
  text height=10pt
 }
}

\begin{figure}[!ht]
\begin{center}
\makebox[\textwidth][c]{%
\begin{tikzpicture}[auto,>=latex']

% Blocks
\node[input, name = input] {};
\node[sum, right = of input, node distance = 1em] (sum) {MP};
\node[block, right of = sum, node distance = 6.5em] (stream) {Stream $2$};
\node[sum, right = of stream, node distance = 1em] (filter) {$F_2$};
\node[sum, above = of sum, node distance = 5em] (sum_2) {MP};
\node[block, right of = sum_2, node distance = 6.5em] (stream_2) {Stream$1$};
\node[sum, right = of stream_2, node distance = 1em] (filter_2) {$F_1$};

% Bullets
\node[below of = sum, node distance = 3em] (dot) {$\bullet$} -- (dot);
\node[below of = dot, node distance = 1em] (dot_2) {$\bullet$} -- (dot_2);
\node[below of = dot_2, node distance = 1em] (dot_3) {$\bullet$} -- (dot_3);
\node[below of = stream, node distance = 3em] (dot_4) {$\bullet$} -- (dot_4);
\node[below of = dot_4, node distance = 1em] (dot_5) {$\bullet$} -- (dot_5);
\node[below of = dot_5, node distance = 1em] (dot_6) {$\bullet$} -- (dot_6);
\node[below of = filter, node distance = 3em] (dot_7) {$\bullet$} -- (dot_7);
\node[below of = dot_7, node distance = 1em] (dot_8) {$\bullet$} -- (dot_8);
\node[below of = dot_8, node distance = 1em] (dot_9) {$\bullet$} -- (dot_9);

% Blocks
\node[input, name = input_n] {};
\node[sum, below = of dot_3, node distance = 1em] (sum_n) {MP};
\node[block, right of = sum_n, node distance = 6.5em] (stream_n) {Stream $n$};
\node[sum, right = of stream_n, node distance = 1em] (filter_n) {$F_n$};

% Sum
\node[sum, right = of filter, node distance = 3em] (total) {$\sum$};

% Oneway delay
\node[block, right of = total, node distance = 7.5em] (delay) {One Way Delay};
\node[block, right of = delay, node distance = 15em] (segments) {$MP_1$ $|$ $Payload_1$ $\dots$ $MP_n$ $|$ $Payload_n$};
\node[output,right = of segments] (output) {};

% Inputs
\node[input,left = of sum_2] (output_2) {};
\node[input,left = of sum_n] (output_n) {};

% Lines Center Block
\draw[->] (input) -- node [name = begging] {$IN_2$} (sum);
\draw[->] (sum) -- node {} (stream);
\draw[->] (stream) -- node {} (filter);
\draw[->] (filter) -- node {} (total);
\draw[->] (total) -- node {} (delay);
\draw[->] (delay) -- node {} (segments);
\draw[->] (segments) -- node {Data} (output);

% Lines Above Center Block
\draw[->] (sum_2) -- node {} (stream_2);
\draw[->] (stream_2) -- node {} (filter_2);
\draw[->] (filter_2) -- node {} (total);

% Lines Below Center Block
\draw[->] (sum_n) -- node {} (stream_n);
\draw[->] (stream_n) -- node {} (filter_n);
\draw[->] (filter_n) -- node {} (total);

% Input Lines
\draw[->] (output_2) -- node {$IN_1$} (sum_2);
\draw[->] (output_n) -- node {$IN_n$} (sum_n);

\end{tikzpicture} }% End of makebox
\caption{New Tikz}
\label{fig:tikz }
\end{center}
\end{figure}
\end{document}

答え1

レイヤー間の間隔を一定に保つ別のアプローチをお勧めします。

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,calc} % braces {}
\usetikzlibrary{shapes,arrows,positioning}
\usepackage{pgfplots}
\pgfplotsset{compat=1.8}

\begin{document}

\tikzset{
 block/.style={
  draw, 
  rectangle, 
  minimum height=2em, 
  minimum width=5em,
 },
 sum/.style={
  draw, 
  circle, 
  minimum size=2em
 },
 input/.style={coordinate}, 
 output/.style={coordinate},
 mytext/.style={
  draw,
  text depth=4pt,
  text height=10pt
 }
}

\begin{figure}[!ht]
\begin{center}
\makebox[\textwidth][c]{%
\begin{tikzpicture}[auto,>=latex']

% Blocks
\node[input, name = input] {};
\node[sum, right = of input, node distance = 1em] (sum) {MP};
\node[block, right of = sum, node distance = 6.5em] (stream) {Stream $2$};
\node[sum, right = of stream, node distance = 1em] (filter) {$F_2$};
\node[sum, above = of sum, node distance = 5em] (sum_2) {MP};
\node[block, right of = sum_2, node distance = 6.5em] (stream_2) {Stream$1$};
\node[sum, right = of stream_2, node distance = 1em] (filter_2) {$F_1$};


% Blocks
\node[input, name = input_n] {};
\node[sum, below = of sum, node distance = 1em] (sum_n) {MP};
\node[block, right of = sum_n, node distance = 6.5em] (stream_n) {Stream $n$};
\node[sum, right = of stream_n, node distance = 1em] (filter_n) {$F_n$};

% Bullets
\foreach \Nodo in {sum,stream,filter}
{
  \node[rotate=90,font=\footnotesize] (dot) 
    at ( $ (\Nodo)!0.5!(\Nodo_n) $ ) {$\bullet\bullet\bullet$};
}

% Sum
\node[sum, right = of filter, node distance = 3em] (total) {$\sum$};

% Oneway delay
\node[block, right of = total, node distance = 7.5em] (delay) {One Way Delay};
\node[block, right of = delay, node distance = 15em] (segments) {$MP_1$ $|$ $Payload_1$ $\dots$ $MP_n$ $|$ $Payload_n$};
\node[output,right = of segments] (output) {};

% Inputs
\node[input,left = of sum_2] (output_2) {};
\node[input,left = of sum_n] (output_n) {};

% Lines Center Block
\draw[->] (input) -- node [name = begging] {$IN_2$} (sum);
\draw[->] (sum) -- node {} (stream);
\draw[->] (stream) -- node {} (filter);
\draw[->] (filter) -- node {} (total);
\draw[->] (total) -- node {} (delay);
\draw[->] (delay) -- node {} (segments);
\draw[->] (segments) -- node {Data} (output);

% Lines Above Center Block
\draw[->] (sum_2) -- node {} (stream_2);
\draw[->] (stream_2) -- node {} (filter_2);
\draw[->] (filter_2) -- node {} (total);

% Lines Below Center Block
\draw[->] (sum_n) -- node {} (stream_n);
\draw[->] (stream_n) -- node {} (filter_n);
\draw[->] (filter_n) -- node {} (total);

% Input Lines
\draw[->] (output_2) -- node {$IN_1$} (sum_2);
\draw[->] (output_n) -- node {$IN_n$} (sum_n);

\end{tikzpicture} }% End of makebox
\caption{New Tikz}
\label{fig:tikz }
\end{center}
\end{figure}
\end{document}

ここに画像の説明を入力してください

アイデアとしては、まずすべてのブロックを描画し、次にライブラリcalc(既にロード済み) を使用して、2 番目と 3 番目のレイヤーのちょうど中間に弾丸を配置します (これは 1 回のループで実行できます)。

% Bullets
\foreach \Nodo in {sum,stream,filter}
{
  \node[rotate=90,font=\footnotesize] (dot) 
    at ( $ (\Nodo)!0.5!(\Nodo_n) $ ) {$\bullet\bullet\bullet$};
}

答え2

より小さいサイズを使用してください1em。以下では を使用しました0.7em:

ここに画像の説明を入力してください

ノート：

  • 垂直間隔の場合は、水平距離に使用する のex代わりに 寸法を使用する必要があります。em

コード：

\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,calc} % braces {}
\usetikzlibrary{shapes,arrows,positioning}
\usepackage{pgfplots}
\pgfplotsset{compat=1.8}

\begin{document}

\tikzset{
 block/.style={
  draw, 
  rectangle, 
  minimum height=2em, 
  minimum width=5em,
 },
 sum/.style={
  draw, 
  circle, 
  minimum size=2em
 },
 input/.style={coordinate}, 
 output/.style={coordinate},
 mytext/.style={
  draw,
  text depth=4pt,
  text height=10pt
 }
}

\begin{figure}[!ht]
\begin{center}
\makebox[\textwidth][c]{%
\begin{tikzpicture}[auto,>=latex']

% Blocks
\node[input, name = input] {};
\node[sum, right = of input, node distance = 1em] (sum) {MP};
\node[block, right of = sum, node distance = 6.5em] (stream) {Stream $2$};
\node[sum, right = of stream, node distance = 1em] (filter) {$F_2$};
\node[sum, above = of sum, node distance = 5em] (sum_2) {MP};
\node[block, right of = sum_2, node distance = 6.5em] (stream_2) {Stream$1$};
\node[sum, right = of stream_2, node distance = 1em] (filter_2) {$F_1$};

% Bullets
\node[below of = sum, node distance = 3em] (dot) {$\bullet$} -- (dot);
\node[below of = dot, node distance = 0.7em] (dot_2) {$\bullet$} -- (dot_2);
\node[below of = dot_2, node distance = 0.7em] (dot_3) {$\bullet$} -- (dot_3);
\node[below of = stream, node distance = 3em] (dot_4) {$\bullet$} -- (dot_4);
\node[below of = dot_4, node distance = 0.7em] (dot_5) {$\bullet$} -- (dot_5);
\node[below of = dot_5, node distance = 0.7em] (dot_6) {$\bullet$} -- (dot_6);
\node[below of = filter, node distance = 3em] (dot_7) {$\bullet$} -- (dot_7);
\node[below of = dot_7, node distance = 0.7em] (dot_8) {$\bullet$} -- (dot_8);
\node[below of = dot_8, node distance = 0.7em] (dot_9) {$\bullet$} -- (dot_9);

% Blocks
\node[input, name = input_n] {};
\node[sum, below = of dot_3, node distance = 1em] (sum_n) {MP};
\node[block, right of = sum_n, node distance = 6.5em] (stream_n) {Stream $n$};
\node[sum, right = of stream_n, node distance = 1em] (filter_n) {$F_n$};

% Sum
\node[sum, right = of filter, node distance = 3em] (total) {$\sum$};

% Oneway delay
\node[block, right of = total, node distance = 7.5em] (delay) {One Way Delay};
\node[block, right of = delay, node distance = 15em] (segments) {$MP_1$ $|$ $Payload_1$ $\dots$ $MP_n$ $|$ $Payload_n$};
\node[output,right = of segments] (output) {};

% Inputs
\node[input,left = of sum_2] (output_2) {};
\node[input,left = of sum_n] (output_n) {};

% Lines Center Block
\draw[->] (input) -- node [name = begging] {$IN_2$} (sum);
\draw[->] (sum) -- node {} (stream);
\draw[->] (stream) -- node {} (filter);
\draw[->] (filter) -- node {} (total);
\draw[->] (total) -- node {} (delay);
\draw[->] (delay) -- node {} (segments);
\draw[->] (segments) -- node {Data} (output);

% Lines Above Center Block
\draw[->] (sum_2) -- node {} (stream_2);
\draw[->] (stream_2) -- node {} (filter_2);
\draw[->] (filter_2) -- node {} (total);

% Lines Below Center Block
\draw[->] (sum_n) -- node {} (stream_n);
\draw[->] (stream_n) -- node {} (filter_n);
\draw[->] (filter_n) -- node {} (total);

% Input Lines
\draw[->] (output_2) -- node {$IN_1$} (sum_2);
\draw[->] (output_n) -- node {$IN_n$} (sum_n);

\end{tikzpicture} }% End of makebox
\caption{New Tikz}
\label{fig:tikz }
\end{center}
\end{figure}
\end{document}

関連情報