行間隔に問題がある文書があります。
\vfill
と以外の行間隔のオプションは何ですか\vspace
?
問題を示すコードは次のとおりです。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\fontfamily{SansSerif}
\selectfont
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\textheight=9.75in
\raggedbottom
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{{\small \colorbox{mygrey}{\begin{minipage}{0.975\textwidth}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\hspace{0.5cm}\\[-0.2cm]
\textbf{Anupam Bisht} \\
\indent $2^{nd}$ Year, B.Tech Student\\
\indent Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
\indent VIT University, Vellore, TN -632014
\hfill Email: [email protected] \\
\resheading{\textbf{OBJECTIVE} }\\[\lsep]
\vspace{4mm} \vfill
\indent To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past \indent can be used to develop a new solution or optimize existing solutions for the profit of company as well as \indent betterment of the society.
\vspace{2mm}
\resheading{\textbf{ACADEMIC DETAILS} }\\[\lsep]
\vspace{5mm} \vfill
%\begin{table}[ht!]
%\begin{center}
\indent \begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
%\end{center}
%\end{table}
\vspace{2mm}
%\resheading{\textbf{FIELDS OF INTEREST} }\\[\lsep]
%\begin{itemize}
%\item \noindent Wireless Network and Network Security, %Another one, a third one
%\end{itemize}
\resheading{\textbf{AREA OF INTEREST} }\\[\lsep]
\vspace{1.0mm}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\vfill
\resheading{\textbf{TECHNICAL SKILLS} }\\[\lsep]
\vfill \vspace{1.0mm}
\begin{itemize}
\item \noindent \textbf{Languages:\space} C ,\space C++,\space Python, \space R
\item \noindent \textbf{Tools:\space}MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \noindent \textbf{Platforms:\space} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS} }\\[\lsep]
\vfill \vspace{0.5mm}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
\indent We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES} }\\[\lsep]
\begin{itemize}
\item \noindent A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item \noindent Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS} }\\[\lsep]
\begin{itemize}
\item \noindent Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item \noindent Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item \noindent Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item \noindent Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item \noindent Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
%\resheading{\textbf{MAJOR PROJECTS AND SEMINAR} }\\[\lsep]
%\begin{itemize}
%\item \textbf{Media Access Control Controling
%} (Research Project) \\
% \emph{(Guide:Prof. Hubert F.
%, May'13 - till date)} \\[-0.6cm]
% \begin{itemize}\itemsep \isep
% \item Objective :Performance analysis of HTTP web browsing traffic.
%.
% \item Performance analysis will help in comparing different MAC protocols based on different network sce-
%narios.
\end{document}
答え1
LaTeX は、垂直方向のスペース (通常の状況) がグローバルに定義されるように設計されています。そのため、項目や段落などの間の距離を手動で調整する必要がありません。さらに、ドキュメントの一貫性が損なわれ、見苦しくなります。
コード内の余分なものをすべて\indent after
\item , manual correction of vertical space, use of
\textbf{...} in
\resheading` (すでに定義されています) などとしてクリーンアップしようとします。
\resheading
また、前後に垂直スペースを追加し、幅を修正する場所を再設計します。テーブルについては、以前の質問の回答を使用します。パッケージitemize
を使用します。enumitem
使用しているので、a4paper
すべてのヤードポンド法単位を SI 単位 (mm) に変更します。最終的には次のようになります。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[margin=20mm]{geometry}
\raggedbottom
\usepackage{palatino}
\fontfamily{SansSerif}\selectfont
\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{graphicx}
\usepackage{xcolor}
\definecolor{mygrey}{gray}{0.75}
\usepackage{booktabs, makecell, tabularx}
\renewcommand\arraystretch{1.3}
\usepackage{verbatim}
\usepackage{pbox}
\usepackage{enumitem}
\setlist[itemize]{leftmargin=*}
\usepackage{url}
\setlength{\parindent}{0pt}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resheading}[1]{\medskip
\colorbox{mygrey}{\begin{minipage}{\dimexpr\textwidth-2\fboxsep\relax}\small
\textbf{#1 \vphantom{p\^{E}}}
\end{minipage}}
\par\medskip}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{\textwidth}{l @{\extracolsep{\fill}} r}
\textsc{\textbf{#1}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\textbf{Anupam Bisht} \\
$2^{nd}$ Year, B.Tech Student\\
Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
VIT University, Vellore, TN -632014
\hfill Email: [email protected] \\
\resheading{OBJECTIVE}
To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past \indent can be used to develop a new solution or optimize existing solutions for the profit of company as well as \indent betterment of the society.
\resheading{\textbf{ACADEMIC DETAILS} }
\begin{tabularx}{\linewidth}{l X l l}
\midrule
\textbf{Year}
& \textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\midrule
2015- Present
& B.Tech Electrical and Electronics Engineering
& VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination
& Kendriya Vidyalaya & 94.8\% \\
2013 & 10th CBSE Board Examination
& Kendriya Vidyalaya & 10 CGPA \\
\midrule
\end{tabularx}
\resheading{\textbf{AREA OF INTEREST} }
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\resheading{TECHNICAL SKILLS}
\begin{itemize}
\item \textbf{Languages:\space} C ,\space C++,\space Python, \space R
\item \textbf{Tools:} MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \textbf{Platforms:} Linux and Windows
\end{itemize}
\resheading{PROJECTS}
\begin{itemize}
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{EXTRA CURRICULAR ACTIVITIES}
\begin{itemize}
\item A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{ACHIEVEMENTS}
\begin{itemize}
\item Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
\end{document}
リスト内で異なる間隔を設定したい場合は、 のオプションで変更できます\itemsep
。\setlist[itemize]{leftmargin=*}
詳細については、パッケージのドキュメントを参照してください。私の意見では、デフォルトの設定は適切に選択されています。