MWE:
\documentclass[12pt]{article}
\usepackage{pgf}
\usepackage{tikz}
\usepackage{pgfplots}
\begin{document}
\begin{tikzpicture}
\draw [line width=1pt] (0,5)-- (0,0);
\draw [line width=1pt] (5,0)-- (0,5);
\draw [line width=1pt] (0,0)-- (5,0);
\draw [fill=black] (0,5) circle (1.5pt);
\draw[color=black] (0.0,5.5) node {$A$};
\draw [fill=black] (0,0) circle (1.5pt);
\draw[color=black] (0.0,-0.5) node {$B$};
\draw [fill=black] (5,0) circle (1.5pt);
\draw[color=black] (5.0,-0.5) node {$C$};
\end{tikzpicture}
\end{document}
質問:
三角形の各線に方向矢印を描くにはどうしたらいいでしょうか? (矢印の可能なすべてのスタイル)
答え1
質問を読み間違えたのかもしれませんが、矢印の種類を変えたい場合は、
\documentclass[12pt]{article}
\usepackage{tikz}
\usetikzlibrary{decorations.markings}
\begin{document}
% based on https://tex.stackexchange.com/a/39282/121799
\tikzset{->-/.style n args={2}{decoration={
markings,
mark=at position #1 with {\arrow{#2}}},postaction={decorate}}}
\begin{tikzpicture}[bullet/.style={circle,inner sep=1.5pt,fill}]
\path (0,5) node[bullet,label=above:$A$](A){}
(0,0) node[bullet,label=below:$B$](B) {}
(5,0) node[bullet,label=below:$C$](C) {};
\foreach \X/\Arrow [remember=\X as \LastX (initially C)]in
{A/latex,B/stealth,C/>}
{\draw[line width=1pt,->-={0.5}{\Arrow}] (\LastX) -- (\X);}
\end{tikzpicture}
\end{document}
あなたのコメントに関してですが、これは 3 つの三角形を描きます。それがあなたが探しているものですか?
\documentclass[12pt]{article}
\usepackage{tikz}
\usetikzlibrary{decorations.markings}
\begin{document}
% based on https://tex.stackexchange.com/a/39282/121799
\tikzset{->-/.style n args={2}{decoration={
markings,
mark=at position #1 with {\arrow[line width=1pt]{#2}}},postaction={decorate}}}
\begin{tikzpicture}[bullet/.style={circle,inner sep=1.5pt,fill}]
\begin{scope}
\path (0,5) node[bullet,label=above:$A$](A){}
(0,0) node[bullet,label=below:$B$](B) {}
(5,0) node[bullet,label=below:$C$](C) {};
\foreach \X [remember=\X as \LastX (initially C)] in {A,B,C}
{\draw[line width=1pt,->-={0.5}{latex}] (\LastX) -- (\X);}
\end{scope}
\begin{scope}[xshift=6cm]
\path (0,5) node[bullet,label=above:$A$](A'){}
(0,0) node[bullet,label=below:$B$](B') {}
(5,0) node[bullet,label=below:$C$](C') {};
\foreach \X [remember=\X as \LastX (initially C')]in {A',B',C'}
{\draw[line width=1pt,->-={0.5}{stealth}] (\LastX) -- (\X);}
\end{scope}
\begin{scope}[yshift=-6.6cm]
\path (0,5) node[bullet,label=above:$A$](A''){}
(0,0) node[bullet,label=below:$B$](B'') {}
(5,0) node[bullet,label=below:$C$](C'') {};
\foreach \X [remember=\X as \LastX (initially C'')]in {A'',B'',C''}
{\draw[line width=1pt,->-={0.5}{>}] (\LastX) -- (\X);}
\end{scope}
\end{tikzpicture}
\end{document}
答え2
使用TikZ: 線の真ん中に矢印を描くにはどうすればいいですか?
%\documentclass[border=2mm]{standalone}
\documentclass{article}
\usepackage{tikz}
\usetikzlibrary{decorations.markings}
\begin{document}
\begin{tikzpicture}
\draw [fill=black] (0,5) circle (1.5pt);
\draw[color=black] (0.0,5.5) node {$A$};
\draw [fill=black] (0,0) circle (1.5pt);
\draw[color=black] (0.0,-0.5) node {$B$};
\draw [fill=black] (5,0) circle (1.5pt);
\draw[color=black] (5.0,-0.5) node {$C$};
\begin{scope}[very thick,decoration={
markings,
mark=at position 0.5 with {\arrow{>}}}
]
\draw [line width=1pt,postaction={decorate}] (0,5)-- (0,0);
\draw [line width=1pt,postaction={decorate}] (5,0)-- (0,5);
\draw [line width=1pt,postaction={decorate}] (0,0)-- (5,0);
\end{scope}
\end{tikzpicture}
\end{document}