☰

tikz 画像を希望どおりに左、右、上、下に配置するにはどうすればよいでしょうか?

tag-icon • tag-icon tikz-pgf xetex
tikz 画像を希望どおりに左、右、上、下に配置するにはどうすればよいでしょうか?

ここに画像の説明を入力してください

\documentclass[12pt]{article}
\usepackage[a4paper,left=1cm,right=1cm,top=1cm,bottom=1cm]{geometry}
\usepackage{fontspec}
\usepackage[dvipsnames]{xcolor}
\usepackage[object=vectorian]{pgfornament} % also loads tikz
\usepackage{labels}

\setmainfont{Holden}
\tikzset{pgfornamentstyle/.style={draw = Periwinkle,
                                  fill = SpringGreen}}

\usetikzlibrary{
  positioning, % for left=of, above=of etc.
  calc % for let syntax used in second example
}
\LabelCols=3%         Number of columns of labels per page
\LabelRows=7%         Number of rows of labels per page
\LeftBorder=8mm%      Space added to left border of each label
\RightBorder=8mm%     Space added to right border of each label
\TopBorder=9mm%       Space to leave at top of sheet
\BottomBorder=2mm%    Space to leave at bottom of sheet
\numberoflabels=22
\begin{document}
% \begin{labels}
% \begin{center}
\begin{tikzpicture}[
  every node/.append style={inner sep=0},
  node distance=5mm
]
   \node [Black] (text) {Vaijan\XeTeXglyph83s Honey};



  \path
    let
    \p1=(text.south west),
    \p2=(text.north east),
    \n1={\x2-\x1}, % width of text node
    \n2={\y2-\y1}  % height of text node
    in
% in all of the below some fraction of \n1 or \n2 is used to define the width of the ornaments
% set width of these ornaments to half the text node's width
   node [anchor=north] (below) at (text.south) {\pgfornament[width=0.5*\n1,symmetry=c]{69}}
   node [anchor=south] (above) at (text.north) {\pgfornament[width=0.5*\n1]{69}}



% use \n2 for ornament width here
   node [rotate=-90, left=of text, anchor=north] (left)  {\pgfornament[width=\n2]{46}}
   node [rotate=90, right=of text, anchor=north] (right) {\pgfornament[width=\n2]{46}}
% and \n1 here
   node [above=of above] (top)    {\pgfornament[width=\n1]{71}}
   node [below=of below] (bottom) {\pgfornament[width=\n1,symmetry=h]{71}}
%   node [anchor=north] (top) at (text.north)   {\pgfornament[width=\n1]{71}}
%   node [anchor=south] (bottom) at (text.south) {\pgfornament[width=\n1,symmetry=h]{71}}
% and 25% of width for the corner ornaments
   node [anchor=north west] at (top.north -| left.south)  {\pgfornament[width=0.25*\n1]{63}}
   node [anchor=north east] at (top.north -| right.south) {\pgfornament[width=0.25*\n1,symmetry=v]{63}}
   node [anchor=south west] at (bottom.south -| left.south) {\pgfornament[width=0.25*\n1,symmetry=h]{63}}
   node [anchor=south east] at (bottom.south -| right.south) {\pgfornament[width=0.25*\n1,symmetry=c]{63}}; % <- note the \path doesn't end until here

   % draw frame
  \draw [Blue] (current bounding box.south west) rectangle (current bounding box.north east);
  \vspace{2cm};
  \node [anchor=south] (bellowaddress1) at (below.south) {\pgfornament[width=0.10*\textwidth]{88}};
  \setmainfont{Linux Biolinum O}
  \tiny
  \node [Brown, below, align=center] (bellowaddress3) at (bellowaddress1.south) {Md.Al-Helal, CSE, DU\\ 01515611989};
  \node [anchor=south, below] (bellowaddress2) at (bellowaddress3.south) {\pgfornament[width=0.10*\textwidth]{88}};
\end{tikzpicture}
% \end{center}
% \end{labels}
\end{document}

テキストを少し上に配置できれば、上部の隙間は最小限に抑えられます。どうすればいいでしょうか?

答え1

削除し node distance=5mmて追加するnode [above=0mm of above] (top) {\pgfornament[width=\n1]{71}}

\documentclass[12pt]{article}
\usepackage[a4paper,left=1cm,right=1cm,top=1cm,bottom=1cm]{geometry}
\usepackage{fontspec}
\usepackage[dvipsnames]{xcolor}
\usepackage[object=vectorian]{pgfornament} % also loads tikz
\usepackage{labels}

\setmainfont{Holden}
\tikzset{pgfornamentstyle/.style={draw = Periwinkle,
                                  fill = SpringGreen}}

\usetikzlibrary{
  positioning, % for left=of, above=of etc.
  calc % for let syntax used in second example
}
\LabelCols=3%         Number of columns of labels per page
\LabelRows=7%         Number of rows of labels per page
\LeftBorder=8mm%      Space added to left border of each label
\RightBorder=8mm%     Space added to right border of each label
\TopBorder=9mm%       Space to leave at top of sheet
\BottomBorder=2mm%    Space to leave at bottom of sheet
\numberoflabels=22
\begin{document}
% \begin{labels}
% \begin{center}
\begin{tikzpicture}[
  every node/.append style={inner sep=0},
  node distance=5mm
]
   \node [Black] (text) {Vaijan's Honey};



  \path
    let
    \p1=(text.south west),
    \p2=(text.north east),
    \n1={\x2-\x1}, % width of text node
    \n2={\y2-\y1}  % height of text node
    in
% in all of the below some fraction of \n1 or \n2 is used to define the width of the ornaments
% set width of these ornaments to half the text node's width
   node [anchor=north] (below) at (text.south) {\pgfornament[width=0.5*\n1,symmetry=c]{69}}
   node [anchor=south] (above) at (text.north) {\pgfornament[width=0.5*\n1]{69}}

% use \n2 for ornament width here
   node [rotate=-90, left=of text, anchor=north] (left)  {\pgfornament[width=\n2]{46}}
   node [rotate=90, right=of text, anchor=north] (right) {\pgfornament[width=\n2]{46}}
% and \n1 here
   node [above=0mm of above] (top)    {\pgfornament[width=\n1]{71}}
   node [below=of below] (bottom) {\pgfornament[width=\n1,symmetry=h]{71}}
%   node [anchor=north] (top) at (text.north)   {\pgfornament[width=\n1]{71}}
%   node [anchor=south] (bottom) at (text.south) {\pgfornament[width=\n1,symmetry=h]{71}}
% and 25% of width for the corner ornaments
   node [anchor=north west] at (top.north -| left.south)  {\pgfornament[width=0.25*\n1]{63}}
   node [anchor=north east] at (top.north -| right.south) {\pgfornament[width=0.25*\n1,symmetry=v]{63}}
   node [anchor=south west] at (bottom.south -| left.south) {\pgfornament[width=0.25*\n1,symmetry=h]{63}}
   node [anchor=south east] at (bottom.south -| right.south) {\pgfornament[width=0.25*\n1,symmetry=c]{63}}; % <- note the \path doesn't end until here

   % draw frame
  \draw [Blue] (current bounding box.south west) rectangle (current bounding box.north east);
  \vspace{2cm};
  \node [anchor=south] (bellowaddress1) at (below.south) {\pgfornament[width=0.10*\textwidth]{88}};
  \setmainfont{Linux Biolinum O}
  \tiny
  \node [Brown, below, align=center] (bellowaddress3) at (bellowaddress1.south) {Md.Al-Helal, CSE, DU\\ 01515611989};
  \node [anchor=south, below] (bellowaddress2) at (bellowaddress3.south) {\pgfornament[width=0.10*\textwidth]{88}};
\end{tikzpicture}
% \end{center}
% \end{labels}
\end{document}

ここに画像の説明を入力してください

答え2

Tiを使用しているのでけZpositioningライブラリを使用すると\usetikzlibrary{positioning}、次のことが可能になります。

\path ... node [above=1.5mm of above] (top) {...}

を指定しない場合は1.5mm、 がnode distance使用されます。これは、5mmこの例では (したがって、はるかに大きくなります)。

完全なコード:

\documentclass{article}
\usepackage[dvipsnames]{xcolor}
\usepackage[object=vectorian]{pgfornament} % also loads tikz
\usetikzlibrary{calc, positioning}
\usepackage{labels}

\tikzset{pgfornamentstyle/.style={draw = Periwinkle,
                                  fill = SpringGreen}}

\LabelCols=3%         Number of columns of labels per page
\LabelRows=7%         Number of rows of labels per page
\LeftBorder=8mm%      Space added to left border of each label
\RightBorder=8mm%     Space added to right border of each label
\TopBorder=9mm%       Space to leave at top of sheet
\BottomBorder=2mm%    Space to leave at bottom of sheet
\numberoflabels=22

\begin{document}

\begin{tikzpicture}[
  every node/.append style={inner sep=0},
  node distance=5mm,
]
  \node [black] (text) {Vaijan\XeTeXglyph83s Honey};
  \path
    let
    \p1=(text.south west),
    \p2=(text.north east),
    \n1={\x2-\x1}, % width of text node
    \n2={\y2-\y1}  % height of text node
    in
   % In all of the below, some fraction of \n1 or \n2 is used to define the
   % width of the ornaments set width of these ornaments to half the text
   % node's width.
   node [anchor=north] (below) at (text.south) {\pgfornament[width=0.5*\n1,symmetry=c]{69}}
   node [anchor=south] (above) at (text.north) {\pgfornament[width=0.5*\n1]{69}}

   % Use \n2 for ornament width here.
   node [rotate=-90, left=of text, anchor=north] (left)  {\pgfornament[width=\n2]{46}}
   node [rotate=90, right=of text, anchor=north] (right) {\pgfornament[width=\n2]{46}}
   % And \n1 here
   node [above=1.5mm of above] (top)    {\pgfornament[width=\n1]{71}}
   node [below=of below] (bottom) {\pgfornament[width=\n1,symmetry=h]{71}}
   node [anchor=north west] at (top.north -| left.south)
     {\pgfornament[width=0.25*\n1]{63}}
   node [anchor=north east] at (top.north -| right.south)
     {\pgfornament[width=0.25*\n1,symmetry=v]{63}}
   node [anchor=south west] at (bottom.south -| left.south)
     {\pgfornament[width=0.25*\n1,symmetry=h]{63}}
   node [anchor=south east] at (bottom.south -| right.south)
     {\pgfornament[width=0.25*\n1,symmetry=c]{63}}; % <- note the \path
                                                    %    doesn't end until here

  % Draw frame
  \draw [blue] (current bounding box.south west) rectangle
               (current bounding box.north east);
  \node [anchor=south] (bellowaddress1) at (below.south)
    {\pgfornament[width=0.10*\textwidth]{88}};
  \node [font=\tiny, Brown, below, align=center]
    (bellowaddress3) at (bellowaddress1.south)
    {Md.Al-Helal, CSE, DU\\ 01515611989};
  \node [anchor=south, below] (bellowaddress2) at (bellowaddress3.south)
    {\pgfornament[width=0.10*\textwidth]{88}};
\end{tikzpicture}

\end{document}

ドキュメントで指定された正確なフォントのないスクリーンショット (私は持っていませんが、回答に影響はありません):

ここに画像の説明を入力してください

追伸:

  • Tiの間\vspaceでは使用しないでくださいtikzpictureけZ ステートメント。

  • font=\tinyTiのフォントサイズを変更するオプションを使用するけZノードは\tinyTiノード間とは対照的であるけZ ステートメント。

\XeTeXglyph83を に置き換えると'、ラベルにはデフォルトのフォントで適切なアポストロフィが付きます。

適切なアポストロフィ

関連情報