\documentclass[a4paper,12pt]{report}
\usepackage{graphicx}
\begin{document}
\begin{center}
{\normalsize{A Dissertation on}}\\
\renewcommand{\baselinestretch}{1.1}
\vspace{5mm}
{\Large\bf {{Fractional Order Controller}}} \\
\renewcommand{\baselinestretch}{1.1}
\vspace{8mm}
{\normalsize{J.A.Gaikwad }} \\
\vspace{8mm}
{\normalsize\bf{Vishwakarma Institute of Technology, Pune}} \\
{\normalsize\textit{(An Autonomous Institute Affiliated to University of Pune)}}\\
\vspace{5mm}
{\normalsize{in partial fulfillment of the requirements for the award of the degree }} \\
%{\normalsize{for the degree of}} \\
\vspace{5mm}
{\Large\bf{Master of Engineering}} \\
%\normalsize{(M. Tech)}\\
\vspace{2mm}
{\normalsize{in}} \\
\vspace{2mm}
{\Large{Instrumentation and Control}} \\
{\large{(Process Instrumentation)}} \\
\vspace{4mm}
{\normalsize{by}} \\
\vspace{4mm}
{\Large\bf{Priyanka Wadje} \\
\vspace{1mm}
\normalsize{(GR NO. 13M089)} \\
\vspace{10mm}
{\large{Under the guidance of}} \\
\vspace{3mm}
{\Large\bf{J.A.Gaikwad}} \\
\vspace{10mm}
\includegraphics[width=1.25in]{vitlogo1.eps}\\%[.5in]
\vspace{15mm}
{\large \bf {Department of Instrumentation and Control Engineering}}\\
%\vspace{1mm}
{\large \bf {Vishwakarma Institute of Technology, Pune-411037}}\\
\vspace{3mm}
\large \bf {31 July 2014}
\end{center}
答え1
\normalsize
、、\large
および を正しく使用していません\Large
。これらはスイッチとして機能し、後続の括弧グループの資料だけでなく、現在のスコープ内のすべてのものに影響します{ ... }
。マクロは\bf
LaTeX では完全にサポートされていません (Plain-TeX コマンドです)。\bfseries
代わりに を使用してください。この命令は、\renewcommand{\baselinestretch}{1.1}
使用している方法では機能しません。setspace
パッケージをロードして、代わりにコマンドを発行することをお勧めします。最後に、タイトル ページにはページ番号が表示されないことが多いため、問題のページに\setstretch{1.1}
命令を追加します。\thispagestyle{empty}
\documentclass[a4paper,12pt]{report}
\usepackage[demo]{graphicx} % omit 'demo' option in real document
\usepackage[margin=1in]{geometry} % choose margins suitably
\usepackage{setspace} % for '\setstretch' macro
\begin{document}
\begin{center}
\setstretch{1.1}
A Dissertation on\\
\vspace{5mm}
{\Large\bfseries Fractional Order Controller} \\
\vspace{8mm}
J.A. Gaikwad\\
\vspace{8mm}
{\bfseries Vishwakarma Institute of Technology, Pune} \\
({\itshape An Autonomous Institute Affiliated to University of Pune})\\
\vspace{5mm}
in partial fulfillment of the requirements for the award of the degree \\
%{\normalsize{for the degree of}} \\
\vspace{5mm}
{\Large\bfseries Master of Engineering} \\
%\normalsize{(M. Tech)}\\
\vspace{2mm}
in \\
\vspace{2mm}
{\Large Instrumentation and Control } \\
{\large (Process Instrumentation) } \\
\vspace{4mm}
by \\
\vspace{4mm}
{\Large\bfseries Priyanka Wadje} \\
\vspace{1mm}
(GR NO. 13M089) \\
\vspace{10mm}
{\large Under the guidance of} \\
\vspace{3mm}
{\Large\bfseries J.A. Gaikwad} \\
\vspace{10mm}
\includegraphics[width=1.25in]{vitlogo1.eps}\\%[.5in]
\vspace{15mm}
{\large \bfseries Department of Instrumentation and Control Engineering}\\
%\vspace{1mm}
{\large \bfseries Vishwakarma Institute of Technology, Pune-411037}\\
\vspace{3mm}
{\large \bfseries 31 July 2014}
\end{center}
\end{document}