CIsco ASA 5505 v9.1 - DMZ での NAT/ACL の問題

CIsco ASA 5505 v9.1 - DMZ での NAT/ACL の問題

この質問に記載されているのとまったく同じ問題があります:Cisco ASA 5505 DMZ セットアップの問題

しかし、Weaver による最も投票数の多い回答では私の問題は解決しなかったため、コミュニティに再度質問しました。彼の回答に非常に忠実に従いましたが、パケット トレース テストは RPF チェックで失敗しました。

packet-tracer input Outside tcp 1.1.1.1 12345 10.0.0.2 22

フェーズ: 6 タイプ: NAT サブタイプ: rpf-check 結果: DROP 構成: object network host-10.0.0.2-tcp22 nat (Lab,Outside) static interface service tcp ssh ssh 追加情報:

結果: 入力インターフェース: 外部 入力ステータス: アップ 入力回線ステータス: アップ 出力インターフェース: ラボ 出力ステータス: アップ 出力回線ステータス: アップ アクション: ドロップ ドロップ理由: (acl-drop) 設定されたルールによりフローが拒否されました

RPF チェックに合格するにはどうすればいいですか? NAT の設定に関する多くの Cisco ドキュメントを読みましたが、どれもここでの問題を解決しません。

#sh run
: Saved
:
ASA Version 9.1(3)
!
hostname [omitted]
domain-name [omitted]
enable password [omitted] encrypted
passwd [omitted] encrypted
names
!
interface Ethernet0/0
!
interface Ethernet0/1
 switchport access vlan 2
!
interface Ethernet0/2
 switchport access vlan 2
!
interface Ethernet0/3
 switchport access vlan 3
!
interface Ethernet0/4
 switchport access vlan 3
!
interface Ethernet0/5
 switchport access vlan 3
!
interface Ethernet0/6
 switchport access vlan 3
!
interface Ethernet0/7
 switchport access vlan 3
!
interface Vlan1
 description OUTSIDE
 mac-address [omitted]
 nameif Outside
 security-level 0
 ip address dhcp setroute
!
interface Vlan2
 description HOME LAN
 nameif Home
 security-level 100
 ip address 192.168.1.1 255.255.255.0
!
interface Vlan3
 description LAB
 no forward interface Vlan2
 nameif Lab
 security-level 50
 ip address 10.0.0.1 255.255.255.0
!
ftp mode passive
clock timezone [omitted]
dns domain-lookup Outside
dns server-group DefaultDNS
 name-server 8.8.8.8
 name-server 8.8.4.4
 domain-name sylvarant
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object network OBJ_INTERNAL_ALL
 subnet 0.0.0.0 0.0.0.0
object network Home-subnet
 subnet 192.168.1.0 255.255.255.0
 description PENDING - For use as Home LAN obj when Internet is available to modify
object network lab-subnet
 subnet 10.0.0.0 255.255.255.0
object network external-ip
 host [omitted]
object service SSH
 service tcp source eq ssh
object network host-10.0.0.2
 host 10.0.0.2
 description Lab Splunk server
object network host-10.0.0.2-tcp22
 host 10.0.0.2
 description Lab Splunk server SSH
object-group service svcgrp-10.0.0.2-tcp tcp
 port-object eq ssh
access-list Home_in extended permit icmp any any echo log
access-list outside_access_in extended permit tcp any object host-10.0.0.2 object-group svcgrp-10.0.0.2-tcp
access-list Lab_access_in extended deny ip any any
pager lines 24
logging enable
logging timestamp
logging asdm informational
mtu Outside 1500
mtu Home 1500
mtu Lab 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (Home,Outside) source dynamic any interface description PAT for HOME network
!
object network lab-subnet
 nat (Lab,Outside) dynamic interface
object network host-10.0.0.2-tcp22
 nat (Lab,Outside) static interface service tcp ssh ssh
access-group outside_access_in in interface Outside
route Home 192.168.0.0 255.255.255.0 192.168.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 Home
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 Home
ssh timeout 60
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0

dhcpd address 192.168.1.2-192.168.1.33 Home
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 129.6.15.30 source Outside prefer
username [omitted] password [omitted] encrypted
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect rsh
  inspect rtsp
  inspect esmtp
  inspect sqlnet
  inspect skinny
  inspect sunrpc
  inspect xdmcp
  inspect sip
  inspect netbios
  inspect tftp
  inspect ip-options
  inspect icmp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
password encryption aes
Cryptochecksum:bbf2ff9baaf19bb46d6adec26d8db9c6
: end

パケットトレーサー入力 外部 tcp 1.1.1.1 12345 [私のパブリックIP] 22:

Phase: 3
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:

Result:
input-interface: Outside
input-status: up
input-line-status: up
output-interface: NP Identity Ifc
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule

sh ナット:

#sh nat
Manual NAT Policies (Section 1)
1 (Home) to (Outside) source dynamic any interface   description PAT for HOME network
    translate_hits = 6922, untranslate_hits = 2

Auto NAT Policies (Section 2)
1 (Lab) to (Outside) source static host-10.0.0.2-tcp22 interface   service tcp ssh ssh
    translate_hits = 0, untranslate_hits = 0
2 (Lab) to (Outside) source dynamic lab-subnet interface
    translate_hits = 0, untranslate_hits = 0

答え1

ああ、古き良き ASA 5500 シリーズ、危険な小さな装置。

私が見た限りでは、あなたのACLは少しずれているようです

access-list Home_in extended permit icmp any any echo log
access-list outside_access_in extended permit tcp any object host-10.0.0.2 object-group svcgrp-10.0.0.2-tcp
access-list Lab_access_in extended deny ip any any ***

Lab 10.0.0.0.xインターフェースで受信ルールを設定していないようです

Lab ACL に次のルールを追加してみてください。

access-list lab_access_in extended permit tcp ssh  host-10.0.0.2 

または asdm 経由 (基本的に、Lab ACL ですべてのホストがポート 22 の 10.0.0.2 にアクセスできるようにします)

関連情報