iptables（フラグの後に指定）ロード可能なすべてのモジュールをリストするにはどうすればよいですか-m？
この郵便受けロード可能なモジュールをリストすることを提案する
ls /lib*/iptables/
私のバージョン ( ) にはこのフォルダがありませんv1.6.0。
答え1
リンク先の投稿に記載されている内容はすべて理解できました。
- 利用可能なすべてのモジュールを一覧表示します。
:~# ls /lib/modules/`uname -r`/kernel/net/netfilter/ - 読み込まれたすべてのモジュールを一覧表示します (ルールで特定のモジュールを使用しない限り、このリストには表示されません)。
:~# cat /proc/net/ip_tables_matches comment addrtype mark conntrack conntrack conntrack recent recent addrtype udplite udp tcp multiport icmp - のマニュアル ページでは、
iptables-extensions標準の iptables ディストリビューションで利用可能な拡張機能に関する情報が提供されています。:~# man 8 iptables-extensions
答え2
gruntboy からの回答を使用して、以下の出力をスクリプト化できます。
bpf match options:
--bytecode <program> : a bpf program as generated by
$(nfbpf_compile RAW '<filter>')
--object-pinned <bpf object> : a path to a pinned BPF object in bpf fs
。
cgroup match options:
[!] --path path Recursively match path relative to cgroup2 root
[!] --cgroup classid Match cgroup classid, can't be used with --path
。
cluster match options:
--cluster-total-nodes <num> Set number of total nodes in cluster
[!] --cluster-local-node <num> Set the local node number
[!] --cluster-local-nodemask <num> Set the local node mask
--cluster-hash-seed <num> Set seed value of the Jenkins hash
。
comment match options:
--comment COMMENT Attach a comment to a rule
。
connbytes match options:
[!] --connbytes from:[to]
--connbytes-dir [original, reply, both]
--connbytes-mode [packets, bytes, avgpkt]
。
connlabel match options:
[!] --label name Match if label has been set on connection
--set Set label on connection
。
connlimit match options:
--connlimit-upto n match if the number of existing connections is 0..n
--connlimit-above n match if the number of existing connections is >n
--connlimit-mask n group hosts using prefix length (default: max len)
--connlimit-saddr select source address for grouping
--connlimit-daddr select destination addresses for grouping
。
connmark match options:
[!] --mark value[/mask] Match ctmark value with optional mask
。
conntrack match options:
[!] --ctstate {INVALID|ESTABLISHED|NEW|RELATED|UNTRACKED|SNAT|DNAT}[,...]
State(s) to match
[!] --ctproto proto Protocol to match; by number or name, e.g. "tcp"
[!] --ctorigsrc address[/mask]
[!] --ctorigdst address[/mask]
[!] --ctreplsrc address[/mask]
[!] --ctrepldst address[/mask]
Original/Reply source/destination address
[!] --ctorigsrcport port
[!] --ctorigdstport port
[!] --ctreplsrcport port
[!] --ctrepldstport port
TCP/UDP/SCTP orig./reply source/destination port
[!] --ctstatus {NONE|EXPECTED|SEEN_REPLY|ASSURED|CONFIRMED}[,...]
Status(es) to match
[!] --ctexpire time[:time] Match remaining lifetime in seconds against
value or range of values (inclusive)
--ctdir {ORIGINAL|REPLY} Flow direction of packet
。
cpu match options:
[!] --cpu number Match CPU number
。
devgroup match options:
[!] --src-group value[/mask] Match device group of incoming device
[!] --dst-group value[/mask] Match device group of outgoing device
。
esp match options:
[!] --espspi spi[:spi]
match spi (range)
。
hashlimit match options:
--hashlimit-upto <avg> max average match rate
[Packets per second unless followed by
/sec /minute /hour /day postfixes]
--hashlimit-above <avg> min average match rate
--hashlimit-mode <mode> mode is a comma-separated list of
dstip,srcip,dstport,srcport (or none)
--hashlimit-srcmask <length> source address grouping prefix length
--hashlimit-dstmask <length> destination address grouping prefix length
--hashlimit-name <name> name for /proc/net/ipt_hashlimit
--hashlimit-burst <num> number to match in a burst, default 5
--hashlimit-htable-size <num> number of hashtable buckets
--hashlimit-htable-max <num> number of hashtable entries
--hashlimit-htable-gcinterval interval between garbage collection runs
--hashlimit-htable-expire after which time are idle entries expired?
--hashlimit-rate-match rate match the flow without rate-limiting it
--hashlimit-rate-interval interval in seconds for hashlimit-rate-match
。
helper match options:
[!] --helper string Match helper identified by string
。
iprange match options:
[!] --src-range ip[-ip] Match source IP in the specified range
[!] --dst-range ip[-ip] Match destination IP in the specified range
。
length match options:
[!] --length length[:length] Match packet length against value or range
of values (inclusive)
。
limit match options:
--limit avg max average match rate: default 3/hour
[Packets per second unless followed by
/sec /minute /hour /day postfixes]
--limit-burst number number to match in a burst, default 5
。
mac match options:
[!] --mac-source XX:XX:XX:XX:XX:XX
Match source MAC address
。
mark match options:
[!] --mark value[/mask] Match nfmark value with optional mask
。
multiport match options:
[!] --source-ports port[,port:port,port...]
--sports ...
match source port(s)
[!] --destination-ports port[,port:port,port...]
--dports ...
match destination port(s)
[!] --ports port[,port:port,port]
match both source and destination port(s)
。
nfacct match options:
--nfacct-name STRING Name of accouting area
。
owner match options:
[!] --uid-owner userid[-userid] Match local UID
[!] --gid-owner groupid[-groupid] Match local GID
[!] --socket-exists Match if socket exists
--suppl-groups Also match supplementary groups set with --gid-owner
。
。
physdev match options:
[!] --physdev-in inputname[+] bridge port name ([+] for wildcard)
[!] --physdev-out outputname[+] bridge port name ([+] for wildcard)
[!] --physdev-is-in arrived on a bridge device
[!] --physdev-is-out will leave on a bridge device
[!] --physdev-is-bridged it's a bridged packet
。
pkttype match options:
[!] --pkt-type packettype match packet type
Valid packet types:
unicast to us
broadcast to all
multicast to group
。
policy match options:
--dir in|out match policy applied during decapsulation/
policy to be applied during encapsulation
--pol none|ipsec match policy
--strict match entire policy instead of single element
at any position
These options may be used repeatedly, to describe policy elements:
[!] --reqid reqid match reqid
[!] --spi spi match SPI
[!] --proto proto match protocol (ah/esp/ipcomp)
[!] --mode mode match mode (transport/tunnel)
[!] --tunnel-src addr/mask match tunnel source
[!] --tunnel-dst addr/mask match tunnel destination
--next begin next element in policy
。
quota match options:
[!] --quota quota quota (bytes)
。
rateest match options:
--rateest1 name Rate estimator name
--rateest2 name Rate estimator name
--rateest-delta Compare difference(s) to given rate(s)
--rateest-bps1 [bps] Compare bps
--rateest-pps1 [pps] Compare pps
--rateest-bps2 [bps] Compare bps
--rateest-pps2 [pps] Compare pps
[!] --rateest-lt Match if rate is less than given rate/estimator
[!] --rateest-gt Match if rate is greater than given rate/estimator
[!] --rateest-eq Match if rate is equal to given rate/estimator
。
。
realm match options:
[!] --realm value[/mask]
Match realm
。
recent match options:
[!] --set Add source address to list, always matches.
[!] --rcheck Match if source address in list.
[!] --update Match if source address in list, also update last-seen time.
[!] --remove Match if source address in list, also removes that address from list.
--seconds seconds For check and update commands above.
Specifies that the match will only occur if source address last seen within
the last 'seconds' seconds.
--reap Purge entries older then 'seconds'.
Can only be used in conjunction with the seconds option.
--hitcount hits For check and update commands above.
Specifies that the match will only occur if source address seen hits times.
May be used in conjunction with the seconds option.
--rttl For check and update commands above.
Specifies that the match will only occur if the source address and the TTL
match between this packet and the one which was set.
Useful if you have problems with people spoofing their source address in order
to DoS you via this module.
--name name Name of the recent list to be used. DEFAULT used if none given.
--rsource Match/Save the source address of each packet in the recent list table (default).
--rdest Match/Save the destination address of each packet in the recent list table.
--mask netmask Netmask that will be applied to this recent list.
xt_recent by: Stephen Frost <[email protected]>.
。
set match options:
[!] --match-set name flags [--return-nomatch]
[! --update-counters] [! --update-subcounters]
[[!] --packets-eq value | --packets-lt value | --packets-gt value
[[!] --bytes-eq value | --bytes-lt value | --bytes-gt value
'name' is the set name from to match,
'flags' are the comma separated list of
'src' and 'dst' specifications.
。
socket match options:
--nowildcard Do not ignore LISTEN sockets bound on INADDR_ANY
--transparent Ignore non-transparent sockets
--restore-skmark Set the packet mark to the socket mark if
the socket matches and transparent /
nowildcard conditions are satisfied
。
state match options:
[!] --state [INVALID|ESTABLISHED|NEW|RELATED|UNTRACKED][,...]
State(s) to match
。
statistic match options:
--mode mode Match mode (random, nth)
random mode:
[!] --probability p Probability
nth mode:
[!] --every n Match every nth packet
--packet p Initial counter value (0 <= p <= n-1, default 0)
。
string match options:
--from Offset to start searching from
--to Offset to stop searching
--algo Algorithm
--icase Ignore case (default: 0)
[!] --string string Match a string in a packet
[!] --hex-string string Match a hex string in a packet
。
tcp match options:
[!] --tcp-flags mask comp match when TCP flags & mask == comp
(Flags: SYN ACK FIN RST URG PSH ALL NONE)
[!] --syn match when only SYN flag set
(equivalent to --tcp-flags SYN,RST,ACK,FIN SYN)
[!] --source-port port[:port]
--sport ...
match source port(s)
[!] --destination-port port[:port]
--dport ...
match destination port(s)
[!] --tcp-option number match if TCP option set
。
tcpmss match options:
[!] --mss value[:value] Match TCP MSS range.
(only valid for TCP SYN or SYN/ACK packets)
。
time match options:
--datestart time Start and stop time, to be given in ISO 8601
--datestop time (YYYY[-MM[-DD[Thh[:mm[:ss]]]]])
--timestart time Start and stop daytime (hh:mm[:ss])
--timestop time (between 00:00:00 and 23:59:59)
[!] --monthdays value List of days on which to match, separated by comma
(Possible days: 1 to 31; defaults to all)
[!] --weekdays value List of weekdays on which to match, sep. by comma
(Possible days: Mon,Tue,Wed,Thu,Fri,Sat,Sun or 1 to 7
Defaults to all weekdays.)
--kerneltz Work with the kernel timezone instead of UTC
。
u32 match options:
[!] --u32 tests
tests := location "=" value | tests "&&" location "=" value
value := range | value "," range
range := number | number ":" number
location := number | location operator number
operator := "&" | "<<" | ">>" | "@"
。
udp match options:
[!] --source-port port[:port]
--sport ...
match source port(s)
[!] --destination-port port[:port]
--dport ...
match destination port(s)