Ich bin vor Kurzem von Windows auf Ubuntu umgestiegen. Ich versuche, Dateien von meiner externen Festplatte auf meine neue Ubuntu-Installation zu verschieben, aber jedes Mal, wenn ich versuche, die Dateien zu kopieren, werden ein paar Kopien gemacht und dann wird das Laufwerk ausgehängt. Die externe Festplatte ist ein neues M.2-Laufwerk in einem Gehäuse, das in exfat formatiert ist. Ich verwende Ubuntu Gnome und die Version ist Ubuntu 22.04.2 LTS amd 64. Das Problem ist auf allen USB 3.0-Anschlüssen meines Computers reproduzierbar und scheint nur bei schnellen Dateiübertragungen größerer Dateien mit exfat aufzutreten. Ich habe das Laufwerk auf ext4 neu formatiert und es funktioniert einwandfrei, auch wenn es schnell von der erwarteten Geschwindigkeit von 400 MB/s auf etwa 120 MB/s abnimmt. Jede Hilfe ist sehr willkommen!
PS: Ich habe dasselbe Problem mit einem Flash-Laufwerk, von dem ich weiß, dass es im Exfat-Format gut funktioniert.
Die Fehlermeldung, die ich in der GUI erhalte, ist
Fehler beim Spleißen der Datei: Eingabe-/Ausgabefehler
Systeminformationen: Screenshot der Systeminformationen
Hier sind die Dmesg-Protokolle des Problems.
Jun 10 08:46:37 chase-System-Product-Name kernel: usb 3-4: reset high-speed USB device number 4 using xhci_hcd
Jun 10 08:46:38 chase-System-Product-Name kernel: [drm:nv_drm_master_set [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000700] Failed to grab modeset ownership
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: New USB device found, idVendor=0bda, idProduct=9210, bcdDevice=20.01
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: Product: Sabrent
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: Manufacturer: Sabrent
Jun 10 08:50:36 chase-System-Product-Name kernel: usb 2-3: SerialNumber: 123400000012
Jun 10 08:50:36 chase-System-Product-Name kernel: usbcore: registered new interface driver usb-storage
Jun 10 08:50:37 chase-System-Product-Name kernel: scsi host6: uas
Jun 10 08:50:37 chase-System-Product-Name kernel: usbcore: registered new interface driver uas
Jun 10 08:50:37 chase-System-Product-Name kernel: scsi 6:0:0:0: Direct-Access Sabrent 1.00 PQ: 0 ANSI: 6
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Write Protect is off
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Mode Sense: 37 00 00 08
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes
Jun 10 08:50:37 chase-System-Product-Name kernel: sdb: sdb1 sdb2
Jun 10 08:50:37 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Attached SCSI disk
Jun 10 08:50:37 chase-System-Product-Name kernel: exFAT-fs (sdb2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#28 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#28 CDB: Read(10) 28 00 37 17 4f 34 00 00 48 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#24 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 37 17 4f 03 00 00 31 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#21 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 37 17 4f 02 00 00 01 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#20 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 37 17 4f 00 00 00 01 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#14 uas_eh_abort_handler 0 uas-tag 18 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 37 17 4f 01 00 00 01 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#13 uas_eh_abort_handler 0 uas-tag 17 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 37 17 48 1c 00 00 e4 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 37 17 4f c1 00 00 3f 00
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
Jun 10 08:52:50 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 37 17 4f 7c 00 00 45 00
Jun 10 08:52:50 chase-System-Product-Name kernel: scsi host6: uas_eh_device_reset_handler start
Jun 10 08:52:50 chase-System-Product-Name kernel: usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
Jun 10 08:52:56 chase-System-Product-Name kernel: usb 2-3: device descriptor read/8, error -110
Jun 10 08:52:56 chase-System-Product-Name kernel: usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
Jun 10 08:53:01 chase-System-Product-Name kernel: usb 2-3: device descriptor read/8, error -110
Jun 10 08:53:11 chase-System-Product-Name kernel: xhci_hcd 0000:01:00.0: Abort failed to stop command ring: -110
Jun 10 08:53:11 chase-System-Product-Name kernel: xhci_hcd 0000:01:00.0: xHCI host controller not responding, assume dead
Jun 10 08:53:11 chase-System-Product-Name kernel: xhci_hcd 0000:01:00.0: HC died; cleaning up
Jun 10 08:53:11 chase-System-Product-Name kernel: xhci_hcd 0000:01:00.0: Timeout while waiting for setup device command
Jun 10 08:53:11 chase-System-Product-Name kernel: usb 1-5: USB disconnect, device number 2
Jun 10 08:53:11 chase-System-Product-Name kernel: usb 1-6: USB disconnect, device number 3
Jun 10 08:53:11 chase-System-Product-Name kernel: usb 1-7: USB disconnect, device number 4
Jun 10 08:53:12 chase-System-Product-Name kernel: usb 2-3: device not accepting address 2, error -22
Jun 10 08:53:12 chase-System-Product-Name kernel: scsi host6: uas_eh_device_reset_handler FAILED err -19
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: Device offlined - not ready after error recovery
Jun 10 08:53:12 chase-System-Product-Name kernel: usb 2-3: USB disconnect, device number 2
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=52s
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 37 17 4f 7c 00 00 45 00
Jun 10 08:53:12 chase-System-Product-Name kernel: I/O error, dev sdb, sector 924274556 op 0x0:(READ) flags 0x80700 phys_seg 69 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=52s
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 37 17 4f c1 00 00 3f 00
Jun 10 08:53:12 chase-System-Product-Name kernel: I/O error, dev sdb, sector 924274625 op 0x0:(READ) flags 0x80700 phys_seg 63 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#13 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=52s
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 37 17 48 1c 00 00 e4 00
Jun 10 08:53:12 chase-System-Product-Name kernel: I/O error, dev sdb, sector 924272668 op 0x0:(READ) flags 0x80700 phys_seg 228 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=52s
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 37 17 4f 01 00 00 01 00
Jun 10 08:53:12 chase-System-Product-Name kernel: I/O error, dev sdb, sector 924274433 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274484 op 0x0:(READ) flags 0x80700 phys_seg 72 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274435 op 0x0:(READ) flags 0x80700 phys_seg 49 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274434 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274432 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274557 op 0x0:(READ) flags 0x80000 phys_seg 68 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: device offline error, dev sdb, sector 924274626 op 0x0:(READ) flags 0x80000 phys_seg 62 prio class 0
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Synchronizing SCSI cache
Jun 10 08:53:12 chase-System-Product-Name kernel: sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
Jun 10 09:02:20 chase-System-Product-Name kernel: audit: type=1400 audit(1686402140.176:75): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19361/usr/lib/snapd/snap-confine" pid=5680 com>
Jun 10 09:02:20 chase-System-Product-Name kernel: audit: type=1400 audit(1686402140.176:76): apparmor="DENIED" operation="capable" class="cap" profile="/snap/snapd/19361/usr/lib/snapd/snap-confine" pid=5680 com>
Jun 10 09:02:20 chase-System-Product-Name kernel: audit: type=1326 audit(1686402140.248:77): auid=1000 uid=1000 gid=1000 ses=3 subj=snap.snap-store.ubuntu-software pid=5680 comm="snap-store" exe="/snap/snap-sto>
Jun 10 09:02:20 chase-System-Product-Name kernel: audit: type=1400 audit(1686402140.352:78): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/etc/pulse/client.con>
Jun 10 09:02:20 chase-System-Product-Name kernel: audit: type=1400 audit(1686402140.352:79): apparmor="DENIED" operation="connect" class="file" profile="snap.snap-store.ubuntu-software" name="/run/user/1000/pul>
Jun 10 09:02:22 chase-System-Product-Name kernel: audit: type=1400 audit(1686402142.280:80): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/etc/pulse/client.con>
Jun 10 09:02:22 chase-System-Product-Name kernel: audit: type=1400 audit(1686402142.280:81): apparmor="DENIED" operation="connect" class="file" profile="snap.snap-store.ubuntu-software" name="/run/user/1000/pul>
Jun 10 09:02:22 chase-System-Product-Name kernel: audit: type=1400 audit(1686402142.376:82): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/etc/pulse/client.con>
Jun 10 09:02:22 chase-System-Product-Name kernel: audit: type=1400 audit(1686402142.376:83): apparmor="DENIED" operation="connect" class="file" profile="snap.snap-store.ubuntu-software" name="/run/user/1000/pul>
Jun 10 09:02:22 chase-System-Product-Name kernel: audit: type=1400 audit(1686402142.376:84): apparmor="DENIED" operation="open" class="file" profile="snap.snap-store.ubuntu-software" name="/etc/pulse/client.con>