Ich versuche, den MT7630E-Treiber zu installieren, aber die Installation ist fehlgeschlagen.
Also habe ich den Mt7601U USB WiFi Dongle gekauft
Ich habe das Paket von dieser Website installiert:https://github.com/terence-deng/mt7601u.git
Ich habe es ohne Fehler kompiliert, dann habe ich den USB-Treiber eingesteckt und geladen, das WLAN wird angezeigt und ich kann mich damit verbinden.
Aber wenn ich Firefox oder Google Chrome öffne, friert Ubuntu ein und wird blockiert. Ich versuche auch, nur WLAN im Terminal zu verwenden, wenn ich diesen Befehl anwende:, sudo apt-get updateUbuntu friert auch ein.
was soll ich tun? Ich brauche unbedingt WLAN auf meinem Laptop.
Vielen Dank im Voraus.
NB: einige Informationen
Kernel (uname -r):4.4.0-148-generic
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 04f2:b40a Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 0e8d:763f MediaTek Inc.
Bus 001 Device 006: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@dounia-pc:/home/dounia/mt7601u# sudo ./load.sh
[ 2883.033553] rtusb init rtusbSTA --->
[ 2883.033797]
[ 2883.033797]
[ 2883.033797] === pAd = ffffc90001821000, size = 895216 ===
[ 2883.033797]
[ 2883.033928] <-- RTMPAllocTxRxRingMemory, Status=0
[ 2883.034105] <-- RTMPAllocAdapterBlock, Status=0
[ 2883.034111] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
[ 2883.034113] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
[ 2883.034116] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
[ 2883.034118] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
[ 2883.034121] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
[ 2883.034123] RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
[ 2883.034463] NVM is EFUSE
[ 2883.034468] Endpoint(8) is for In-band Command
[ 2883.034471] Endpoint(4) is for WMM0 AC0
[ 2883.034474] Endpoint(5) is for WMM0 AC1
[ 2883.034476] Endpoint(6) is for WMM0 AC2
[ 2883.034479] Endpoint(7) is for WMM0 AC3
[ 2883.034482] Endpoint(9) is for WMM1 AC0
[ 2883.034484] Endpoint(84) is for Data-In
[ 2883.034487] Endpoint(85) is for Command Rsp
[ 2883.035828] usbcore: registered new interface driver rtusbSTA
[ 2883.039133] RTMP_TimerListAdd: add timer obj ffffc900018a4688!
[ 2883.039139] RTMP_TimerListAdd: add timer obj ffffc900018a46b8!
[ 2883.039142] RTMP_TimerListAdd: add timer obj ffffc900018a46e8!
[ 2883.039145] RTMP_TimerListAdd: add timer obj ffffc900018a4658!
[ 2883.039149] RTMP_TimerListAdd: add timer obj ffffc900018a45c8!
[ 2883.039152] RTMP_TimerListAdd: add timer obj ffffc900018a45f8!
[ 2883.039155] RTMP_TimerListAdd: add timer obj ffffc90001837bd0!
[ 2883.039158] RTMP_TimerListAdd: add timer obj ffffc90001823a78!
[ 2883.039161] RTMP_TimerListAdd: add timer obj ffffc90001823ab0!
[ 2883.039163] RTMP_TimerListAdd: add timer obj ffffc90001837c80!
[ 2883.039166] RTMP_TimerListAdd: add timer obj ffffc90001826600!
[ 2883.039169] RTMP_TimerListAdd: add timer obj ffffc90001825c78!
[ 2883.039171] RTMP_TimerListAdd: add timer obj ffffc900018265c8!
[ 2883.039174] RTMP_TimerListAdd: add timer obj ffffc900018268e8!
[ 2883.039177] RTMP_TimerListAdd: add timer obj ffffc90001826638!
[ 2883.039179] RTMP_TimerListAdd: add timer obj ffffc90001826670!
[ 2883.039182] RTMP_TimerListAdd: add timer obj ffffc900018266a8!
[ 2883.039186] RTMP_TimerListAdd: add timer obj ffffc90001837b70!
[ 2883.039189] RTMP_TimerListAdd: add timer obj ffffc90001837c50!
[ 2883.039210] RTMP_TimerListAdd: add timer obj ffffc90001826940!
[ 2883.039213] RTMP_TimerListAdd: add timer obj ffffc90001826970!
[ 2883.039216] RTMP_TimerListAdd: add timer obj ffffc900018269a0!
[ 2883.039219] RTMP_TimerListAdd: add timer obj ffffc900018269d0!
[ 2883.055761] no file read method
[ 2883.055767] Read file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed(errCode=-1)!
[ 2883.055770] 1. Phy Mode = 6
[ 2883.055820] 2. Phy Mode = 6
[ 2883.055823] NVM is Efuse and its size =1d[1e0-1fc]
[ 2883.061938] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xd, should be 12
[ 2883.071062] 3. Phy Mode = 6
[ 2883.071065] AntCfgInit: primary/secondary ant 0/1
[ 2883.270483] ---> InitFrequencyCalibration
[ 2883.270487] InitFrequencyCalibrationMode:Unknow mode = 3
[ 2883.270489] InitFrequencyCalibration: frequency offset in the EEPROM = 85(0x55)
[ 2883.270490] <--- InitFrequencyCalibration
[ 2883.270494] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 2883.270497] MCS Set = 00 00 00 00 00
[ 2883.280448] <==== rt28xx_init, Status=0
[ 2883.280858] 0x1300 = 000a4200
[ 2883.280859] RTMPDrvOpen(1):Check if PDMA is idle!
[ 2883.280902] RTMPDrvOpen(2):Check if PDMA is idle!
[ 2883.283758] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.283910] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.286661] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.286663] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.286664] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.286851] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.287062] ERROR!!! RTMPSetTimer failed, Halt in Progress!
[ 2883.497930] AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OFF
[ 2883.497972] unlink cmd rsp urb
[ 2883.580693] RTMP_TimerListAdd: add timer obj ffffc900018a4688!
[ 2883.580695] RTMP_TimerListAdd: add timer obj ffffc900018a46b8!
[ 2883.580697] RTMP_TimerListAdd: add timer obj ffffc900018a46e8!
[ 2883.580698] RTMP_TimerListAdd: add timer obj ffffc900018a4658!
[ 2883.580700] RTMP_TimerListAdd: add timer obj ffffc900018a45c8!
[ 2883.580701] RTMP_TimerListAdd: add timer obj ffffc900018a45f8!
[ 2883.580702] RTMP_TimerListAdd: add timer obj ffffc90001837bd0!
[ 2883.580704] RTMP_TimerListAdd: add timer obj ffffc90001823a78!
[ 2883.580705] RTMP_TimerListAdd: add timer obj ffffc90001823ab0!
[ 2883.580706] RTMP_TimerListAdd: add timer obj ffffc90001837c80!
[ 2883.580707] RTMP_TimerListAdd: add timer obj ffffc90001826600!
[ 2883.580708] RTMP_TimerListAdd: add timer obj ffffc90001825c78!
[ 2883.580709] RTMP_TimerListAdd: add timer obj ffffc900018265c8!
[ 2883.580710] RTMP_TimerListAdd: add timer obj ffffc900018268e8!
[ 2883.580711] RTMP_TimerListAdd: add timer obj ffffc90001826638!
[ 2883.580712] RTMP_TimerListAdd: add timer obj ffffc90001826670!
[ 2883.580713] RTMP_TimerListAdd: add timer obj ffffc900018266a8!
[ 2883.580715] RTMP_TimerListAdd: add timer obj ffffc90001837b70!
[ 2883.580717] RTMP_TimerListAdd: add timer obj ffffc90001837c50!
[ 2883.580727] RTMP_TimerListAdd: add timer obj ffffc90001826940!
[ 2883.580728] RTMP_TimerListAdd: add timer obj ffffc90001826970!
[ 2883.580730] RTMP_TimerListAdd: add timer obj ffffc900018269a0!
[ 2883.580731] RTMP_TimerListAdd: add timer obj ffffc900018269d0!
[ 2883.590956] no file read method
[ 2883.590959] Read file "/etc/Wireless/RT2870STA/RT2870STA.dat" failed(errCode=-1)!
[ 2883.590961] 1. Phy Mode = 6
[ 2883.590963] 2. Phy Mode = 6
[ 2883.590965] NVM is Efuse and its size =1d[1e0-1fc]
[ 2883.594548] ERROR!!! MT7601 E2PROM: WRONG VERSION 0xd, should be 12
[ 2883.603878] 3. Phy Mode = 6
[ 2883.603881] AntCfgInit: primary/secondary ant 0/1
[ 2883.801624] ---> InitFrequencyCalibration
[ 2883.801630] InitFrequencyCalibrationMode:Unknow mode = 3
[ 2883.801633] InitFrequencyCalibration: frequency offset in the EEPROM = 85(0x55)
[ 2883.801635] <--- InitFrequencyCalibration
[ 2883.801643] MCS Set = 00 00 00 00 00
[ 2883.811600] <==== rt28xx_init, Status=0
[ 2883.812084] 0x1300 = 000a4200
[ 2883.812088] RTMPDrvOpen(1):Check if PDMA is idle!
[ 2883.812146] RTMPDrvOpen(2):Check if PDMA is idle!
[ 2883.837520] /home/dounia/mt7601u/src/os/linux/../../common/cmm_asic.c:2123 assert KeyIdx < 4failed
[ 2883.837721] /home/dounia/mt7601u/src/os/linux/../../common/cmm_asic.c:2123 assert KeyIdx < 4failed
[ 2885.437675] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 228
[ 2885.479778] ==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=10)
[ 2885.505056] PeerBeaconAtJoinAction(): Set CentralChannel=10
[ 2907.454893] Bulk In Failed. Status=-71, BIIdx=0x7, BIRIdx=0x7, actual_length= 0x0
[ 2907.455005] usb 1-1: USB disconnect, device number 6
[ 2907.455462] rtusb_disconnect: unregister usbnet usb-0000:00:14.0-1
[ 2907.455470] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 2907.464931] CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x300a0542) on !
[ 2907.576542] ---> RTMPFreeTxRxRingMemory
[ 2907.576563] <--- RTMPFreeTxRxRingMemory
[ 2907.576565] reg_atomic get failed(ret=-1)
[ 2907.576625] RTUSB disconnect successfully
[ 2907.816679] usb 1-1: new high-speed USB device number 7 using xhci_hcd
[ 2909.912764] usbcore: deregistering interface driver rtusbSTA
[ 2909.912823] <--- rtusb exit
[ 2915.773156] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[ 2915.912232] usb 1-2: New USB device found, idVendor=148f, idProduct=7601
[ 2915.912236] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2915.912239] usb 1-2: Product: 802.11 n WLAN
[ 2915.912241] usb 1-2: Manufacturer: MediaTek
[ 2915.912243] usb 1-2: SerialNumber: 1.0
[ 2915.916853] mt7601Usta: disagrees about version of symbol module_layout
ifconfig
eth0 Link encap:Ethernet HWaddr 78:24:af:6c:61:ab
inet adr:192.168.1.39 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fd80::7a24:afff:fe6c:61ab/64 Scope:Global
adr inet6: fd80::5d2:5e5b:61b3:dbe3/64 Scope:Global
adr inet6: fe80::7a24:afff:fe6c:61ab/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:14565 erreurs:0 :0 overruns:0 frame:0
TX packets:12677 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:4693358 (4.6 MB) Octets transmis:3085059 (3.0 MB)
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:65536 Metric:1
Packets reçus:4755 erreurs:0 :0 overruns:0 frame:0
TX packets:4755 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1
Octets reçus:414412 (414.4 KB) Octets transmis:414412 (414.4 KB)
ra0 Link encap:Ethernet HWaddr 20:e5:17:02:ee:95
inet adr:192.168.1.42 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::22e5:17ff:fe02:ee95/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:1231 erreurs:0 :3 overruns:0 frame:0
TX packets:136 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:311554 (311.5 KB) Octets transmis:25601 (25.6 KB)