Dual-Monitor-Einrichtung mit StartX funktioniert nicht

Dual-Monitor-Einrichtung mit StartX funktioniert nicht

Ich habe zwei Monitore, auf denen jeweils zwei unterschiedliche Anwendungen liefen. Z. B.

  • Monitor A sollte den Chromium-Browser ausführen
  • Monitor B sollte einen anderen Chromium-Browser ausführen

Dies sollte nach dem Systemstart ausgeführt werden.

xorg.conf unten

Section "ServerFlags"

        # Even if mouse detection fails, X will start
    Option         "AllowMouseOpenFail" "yes"
        # VT switching is disabled
    Option         "DontVTSwitch" "yes"
        # X restart (Ctrl+Alt+Backspace) is disabled
    Option         "DontZap" "yes"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
   Identifier     "Keyboard0"
    Driver         "kbd"
EndSection


Section "InputDevice"

    # generated from default
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard1"
    Driver         "kbd"
EndSection
Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL ST2220M"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 82.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
     Identifier    "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 630"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1920x720"
    EndSubSection
EndSection

Section "Screen"
   Identifier      "Screen1"
   Device      "Device0"
   Monitor     "Monitor1"
   DefaultDepth    24
   SubSection      "Display"
    Depth      24
        Modes      "1920x720"
   EndSubSection
EndSection

Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    InputDevice "mouse0" "CorePointer"
    InputDevice "keyboard0" "CoreKeyboard"
    Option         "Xinerama" "0"
EndSection

Section "ServerLayout"
    Identifier "Layout1"
    Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "mouse1"
    InputDevice "keyboard1" 
    Option         "Xinerama" "1"
EndSection

Im Init-Skript von Runlevel 2 habe ich:

startx /path/to/screen-0-app.sh -- :0 -layout Layout0 -config /path/to/displaylink.conf -nolisten tcp vt7 -novtswitch -sharevts &

startx /path/to/screen-1-app.sh -- :1 -layout Layout1 -config /path/to/displaylink.conf -nolisten tcp vt8 -novtswitch -sharevts &

displaylink.confdasselbe wie xorg.conf:

screen-0-app.sh and screen-1-app.sh consist of 

exec xterm -e xrandr -s 1920x1080 &

exec chromium-browser --user-data-dir=~/.chromium --window-size=1920,1080 --window-position=0,0 --kiosk --incognito http://www.youtube.com/watch?v=MRbI6LwLz94

another screen consist of different youtube link with same setup

Das Problem ist, dass ich mit diesem Setup keinen Monitor zum Laufen bekomme. Das bedeutet Folgendes:

Youtube-Video wird im Chromium-Browser abgespielt. Ein Startx funktioniert, aber ein anderer Monitor scheint leer zu sein und gibt den folgenden Fehler aus:

(++) Using config file: "/home/atled/displaylink.conf"

(==) Using system config directory "/usr/share/X11/xorg.conf.d"

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

 ddxSigGiveUp: Closing log

xorg.0.log-Datei [ 40.255]

X.Org X Server 1.11.3
Release Date: 2011-12-16
[    40.255] X Protocol Version 11, Revision 0
[    40.255] Build Operating System: Linux 2.6.42-26-generic i686 Ubuntu
[    40.255] Current Operating System: Linux atled-desktop 3.2.0-45-generic-pae #70-Ubuntu SMP Wed May 29 20:31:05 UTC 2013 i686
[    40.255] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-45-generic-pae root=UUID=8057523e-f126-4b9b-9534-b7c4cda86c8d ro acpi=off apm=off quiet splash vt.handoff=7
[    40.255] Build Date: 04 August 2012  01:51:24AM
[    40.255] xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support)
[    40.255] Current version of pixman: 0.24.4
[    40.255]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    40.255] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    40.255] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun  7 20:34:44 2013
[    40.256] (++) Using config file: "/home/atled/displaylink.conf"
[    40.256] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    40.265] (++) ServerLayout "Layout0"
[    40.265] (**) |-->Screen "Screen0" (0)
[    40.265] (**) |   |-->Monitor "Monitor0"
[    40.265] (**) |   |-->Device "Device0"
[    40.265] (**) |-->Input Device "Mouse0"
[    40.265] (**) |-->Input Device "Keyboard0"
[    40.265] (**) Option "DontVTSwitch" "yes"
[    40.265] (**) Option "DontZap" "yes"
[    40.265] (**) Option "AllowMouseOpenFail" "yes"
[    40.265] (**) Option "Xinerama" "0"
[    40.265] (==) Automatically adding devices
[    40.265] (==) Automatically enabling devices
[    40.265] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    40.265]    Entry deleted from font path.
[    40.265] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        built-ins
[    40.265] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    40.265] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    40.265] (WW) Disabling Mouse0
[    40.265] (WW) Disabling Keyboard0
[    40.265] (II) Loader magic: 0xb77195a0
[    40.265] (II) Module ABI versions:
[    40.265]    X.Org ANSI C Emulation: 0.4
[    40.265]    X.Org Video Driver: 11.0
[    40.265]    X.Org XInput driver : 16.0
[    40.265]    X.Org Server Extension : 6.0
[    40.266] (--) PCI:*(0:1:0:0) 10de:0f00:19da:1282 rev 161, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/524288
[    40.266] (II) Open ACPI successful (/var/run/acpid.socket)
[    40.266] (II) LoadModule: "extmod"
[    40.267] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    40.267] (II) Module extmod: vendor="X.Org Foundation"
[    40.267]    compiled for 1.11.3, module version = 1.0.0
[    40.267]    Module class: X.Org Server Extension
[    40.267]    ABI class: X.Org Server Extension, version 6.0
[    40.267] (II) Loading extension MIT-SCREEN-SAVER
[    40.267] (II) Loading extension XFree86-VidModeExtension
[    40.267] (II) Loading extension XFree86-DGA
[    40.267] (II) Loading extension DPMS
[    40.267] (II) Loading extension XVideo
[    40.267] (II) Loading extension XVideo-MotionCompensation
[    40.267] (II) Loading extension X-Resource
[    40.267] (II) LoadModule: "dbe"
[    40.267] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    40.267] (II) Module dbe: vendor="X.Org Foundation"
[    40.267]    compiled for 1.11.3, module version = 1.0.0
[    40.267]    Module class: X.Org Server Extension
[    40.267]    ABI class: X.Org Server Extension, version 6.0
[    40.267] (II) Loading extension DOUBLE-BUFFER
[    40.267] (II) LoadModule: "glx"
[    40.267] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/libglx.so
[    40.286] (II) Module glx: vendor="NVIDIA Corporation"
[    40.286]    compiled for 4.0.2, module version = 1.0.0
[    40.286]    Module class: X.Org Server Extension
[    40.286] (II) NVIDIA GLX Module  304.88  Wed Mar 27 14:51:59 PDT 2013
[    40.286] (II) Loading extension GLX
[    40.286] (II) LoadModule: "record"
[    40.286] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    40.286] (II) Module record: vendor="X.Org Foundation"
[    40.286]    compiled for 1.11.3, module version = 1.13.0
[    40.286] (II) LoadModule: "dri"
[    40.287] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    40.287] (II) Module dri: vendor="X.Org Foundation"
[    40.287]    compiled for 1.11.3, module version = 1.0.0
[    40.287]    ABI class: X.Org Server Extension, version 6.0
[    40.287] (II) Loading extension XFree86-DRI
[    40.287] (II) LoadModule: "dri2"
[    40.287] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    40.287] (II) Module dri2: vendor="X.Org Foundation"
[    40.287]    compiled for 1.11.3, module version = 1.2.0
[    40.287]    ABI class: X.Org Server Extension, version 6.0
[    40.287] (II) Loading extension DRI2
[    40.287] (II) LoadModule: "nvidia"
[    40.287] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    40.287] (II) Module nvidia: vendor="NVIDIA Corporation"
[    40.287]    compiled for 4.0.2, module version = 1.0.0
[    40.287]    Module class: X.Org Video Driver
[    40.288] (II) NVIDIA dlloader X Driver  304.88  Wed Mar 27 14:32:42 PDT 2013
[    40.288] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    40.288] (++) using VT number 7

[    40.288] (II) Loading sub module "fb"
[    40.288] (II) LoadModule: "fb"
[    40.288] (II) Loading /usr/lib/xorg/modules/libfb.so
[    40.288] (II) Module fb: vendor="X.Org Foundation"
[    40.288]    compiled for 1.11.3, module version = 1.0.0
[    40.288]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.288] (II) Loading sub module "wfb"
[    40.288] (II) LoadModule: "wfb"
[    40.288] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    40.288] (II) Module wfb: vendor="X.Org Foundation"
[    40.288]    compiled for 1.11.3, module version = 1.0.0
[    40.288]    ABI class: X.Org ANSI C Emulation, version 0.4
[    40.288] (II) Loading sub module "ramdac"
[    40.288] (II) LoadModule: "ramdac"
[    40.288] (II) Module "ramdac" already built-in
[    40.288] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    40.288] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    40.288] (II) Loading /usr/lib/xorg/modules/libfb.so
[    40.288] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    40.288] (==) NVIDIA(0): RGB weight 888
[    40.288] (==) NVIDIA(0): Default visual is TrueColor
[    40.288] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    40.288] (**) NVIDIA(0): Enabling 2D acceleration
[    40.878] (II) NVIDIA(GPU-0): Display (DELL ST2220M (DFP-0)) does not support NVIDIA 3D
[    40.878] (II) NVIDIA(GPU-0):     Vision stereo.
[    40.891] (II) NVIDIA(GPU-0): Display (Philips 224EL (DFP-1)) does not support NVIDIA 3D
[    40.891] (II) NVIDIA(GPU-0):     Vision stereo.
[    40.894] (II) NVIDIA(0): NVIDIA GPU GeForce GT 630 (GF108) at PCI:1:0:0 (GPU-0)
[    40.894] (--) NVIDIA(0): Memory: 1048576 kBytes
[    40.894] (--) NVIDIA(0): VideoBIOS: 70.08.aa.00.00
[    40.894] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    40.894] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    40.895] (EE) NVIDIA(GPU-0): EVO Push buffer channel allocation failed
[    40.895] (EE)  *** Aborting ***
[    40.895] (EE) NVIDIA(GPU-0): Failed to allocate EVO core DMA push buffer
[    40.895] (EE)  *** Aborting ***
[    40.895] (EE) NVIDIA(0): Failing initialization of X screen 0
[    40.896] (II) UnloadModule: "nvidia"
[    40.896] (II) Unloading nvidia
[    40.896] (II) UnloadModule: "wfb"
[    40.896] (II) Unloading wfb
[    40.897] (II) UnloadModule: "fb"
[    40.897] (II) Unloading fb
[    40.897] (EE) Screen(s) found, but none have a usable configuration.
[    40.897]
Fatal server error:
[    40.897] no screens found
[    40.897]
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[    40.897] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    40.897]
[    40.897]  ddxSigGiveUp: Closing log
[    40.897] Server terminated with error (1). Closing log file.

Antwort1

Displays und Monitore sind nicht dasselbe.

Sie versuchen, für jeden Monitor einen separaten X-Server und eine separate Anzeige zu starten. Das ist nicht das, was Sie möchten.

:0Sie möchten einen X-Server mit 1 Display ( ) und zwei Monitoren ( :0.0und ) starten :0.1.

Sie sollten einen startxAufruf zum Starten haben :0, und das Skript sollte beide Anwendungen starten und eine davon mit dem --window-positionParameter auf den zweiten Bildschirm verschieben.

Wenn Ihre Monitore nebeneinander stehen und der erste eine Auflösung von 1920 x 1080 mit einer oberen linken Ecke von 0,0 hat, dann beträgt die obere linke Ecke des zweiten Monitors 1920,0.

Antwort2

Was Darth gesagt hat. Außerdem xorg.confbeziehen Sie sich in unserem sowohl auf monitor0(für screen0) als auch monitor1auf (für screen1), aber Sie haben nur einen monitorAbschnitt definiert, und zwar monitor0.

Ich vermute, dass der Fehler „Keine Bildschirme gefunden“ darauf zurückzuführen ist, dass X versucht, etwas zu finden monitor1, das aber nicht existiert.

verwandte Informationen