Ich verwende Debian 9 Stretch
Wenn mein Debian bootet, erscheint eine lange Liste von Zeilen, viele davon sagen, dass die Firmware fehlt, und viele andere Fehler. Warum treten diese Fehler überhaupt auf?
Meine Bootmeldung lautet wie folgt:
[ 0.296164] ACPI: \: Used as first EC
[ 0.296164] ACPI: \: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.296164] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.319283] **
ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.RP01.PXSX], AE_NOT_FOUND (20180810/psargs-330)
[ 0.319292] ACPI Error: Ignore error and continue table load (20180810/psobject-604)
[ 0.319296] ACPI Error: Skipping While/If block (20180810/psloop-623)
[ 0.342435] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.349815] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.356999] ACPI: Dynamic OEM Table Load:
--------------------------------------------------------------------------
[ 1.186255] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
--------------------------------------------------------------------------
[ 9.411613] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 9.413574] pstore: Registered efi as persistent store backend
[ 9.435506] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 9.435603] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[ 9.461380] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 9.461382] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
--------------------------------------------------------------------------
[ 11.451232] bluetooth hci0: firmware: **failed to load rtl_bt/rtl8723b_config.bin (-2)**
[ 11.451238] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 11.451269] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496
[ 11.464392] rtl8723be 0000:03:00.0: firmware: **failed to load rtlwifi/rtl8723befw_36.bin (-2)**
[ 11.464399] rtl8723be 0000:03:00.0: Direct firmware load for rtlwifi/rtl8723befw_36.bin failed with error -2
[ 11.481313] rtl8723be 0000:03:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
[ 11.481320] rtlwifi: Loading alternative firmware rtlwifi/rtl8723befw.bin
--------------------------------------------------------------------------
[ 12.307182] nouveau 0000:01:00.0: **NVIDIA GM108 (1180e0a2)**
Kann ich den Nvidia-Treiber unfrei installieren? Wie mache ich das? Ich habe eine Nvidia GTX 930mx.
[ 12.331549] nouveau 0000:01:00.0: bios: version 82.08.59.00.29
[ 12.403513] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.403515] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.403517] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.403517] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.403518] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.403520] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x1b
[ 12.403521] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 12.416140] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 12.416160] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 12.432301] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 10ac08 [ IBUS ]
[ 12.492688] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.519082] dell_smbios: Unable to run on non-Dell system
[ 12.599606] snd_hda_codec_realtek hdaudioC0D0: Failed to find dell wmi symbol dell_micmute_led_set
[ 12.655743] scsi 2:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS
[ 12.655972] sd 2:0:0:0: Attached scsi generic sg2 type 0
--------------------------------------------------------------------------
[ 13.713693] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 13.713696] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 13.713722] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 13.714544] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
--------------------------------------------------------------------------
[ 41.358571] Bluetooth: RFCOMM TTY layer initialized
[ 41.358576] Bluetooth: RFCOMM socket layer initialized
[ 41.358580] Bluetooth: RFCOMM ver 1.11
[ 58.364851] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]
[ 62.269020] fuse init (API version 7.27)
[ 170.939363] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ IBUS ]