Ich versuche, einen 3G-USB-Dongle mithilfe eines Skripts namens sakis3g auf einem Raspberry Pi mit Raspbian Wheezy zum Laufen zu bringen.
Allerdings stoße ich bei diesem Versuch immer wieder auf Probleme: Beim Versuch, eine Verbindung zum USB-Gerät herzustellen, gibt das Skript „Illegal Instruction“ aus und kommt nicht weiter. Ich habe einenFrage dazu auf der Raspberry Pi Stack Overflow-Site, und bekam eine Anleitung, der ich folgen sollte (Antwort von BigCowPi). Wie ich dort jedoch schon sagte, wenn ich versuche, es auszuführen lsusb(das erste in dieser Anleitung), wird immer noch „Illegal Instruction“ ausgegeben und ich komme nicht weiter.
Ich habe versucht, neu zu installierenAbonnierenUndlibsub-1.0-0für armhf, aber das hat die Situation nicht verbessert.
Erwähnenswert ist vielleicht auch, dass ich derzeit keinen Internetzugang habe. Daher habe ich Pakete zur Installation heruntergeladen und dpkg verwendet, statt etwas Einfacheres wie apt-get.
Von der Raspberry-Pi-Site habe ich keine Antwort erhalten und dachte, es könnte sich lohnen, stattdessen hier zu fragen, da es sich ohnehin eher um ein Linux-bezogenes Problem handeln könnte.
Ausgabe von strace lsusb
Wie von @Flup angefordert, hier die Ausgabe von strace:
pi@raspberrypi ~/Desktop $ strace lsusb -o > lsusblog.log
execve("/usr/bin/lsusb", ["lsusb", "-o"], [/* 28 vars */]) = 0
brk(0) = 0x914000
uname({sys="Linux", node="raspberrypi", ...}) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4005a000
access("/etc/ld.so.preload", R_OK) = 0
open("/etc/ld.so.preload", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=44, ...}) = 0
mmap2(NULL, 44, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x40155000
close(3) = 0
open("/usr/lib/arm-linux-gnueabihf/libcofi_rpi.so", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\4\0\0004\0\0\0"..., 512) = 512
lseek(3, 3456, SEEK_SET) = 3456
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1240) = 1240
lseek(3, 2537, SEEK_SET) = 2537
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=7332, ...}) = 0
mmap2(NULL, 35276, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4022f000
mprotect(0x40230000, 28672, PROT_NONE) = 0
mmap2(0x40237000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x40237000
close(3) = 0
munmap(0x40155000, 44) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=37860, ...}) = 0
mmap2(NULL, 37860, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40046000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libusb-1.0.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\f\"\0\0004\0\0\0"..., 512) = 512
lseek(3, 37532, SEEK_SET) = 37532
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1040) = 1040
lseek(3, 37256, SEEK_SET) = 37256
read(3, "A4\0\0\0aeabi\0\1*\0\0\0\0057-A\0\6\n\7A\10\1\t\2\n\4\22"..., 53) = 53
fstat64(3, {st_mode=S_IFREG|0644, st_size=38572, ...}) = 0
mmap2(NULL, 70084, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40122000
mprotect(0x4012b000, 28672, PROT_NONE) = 0
mmap2(0x40132000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40132000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libz.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0008\33\0\0004\0\0\0"..., 512) = 512
lseek(3, 86632, SEEK_SET) = 86632
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1160) = 1160
lseek(3, 86300, SEEK_SET) = 86300
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0644, st_size=87792, ...}) = 0
mmap2(NULL, 119072, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4008f000
mprotect(0x400a3000, 32768, PROT_NONE) = 0
mmap2(0x400ab000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14) = 0x400ab000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\210y\1\0004\0\0\0"..., 512) = 512
lseek(3, 1186592, SEEK_SET) = 1186592
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1360) = 1360
lseek(3, 1186156, SEEK_SET) = 1186156
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=1187952, ...}) = 0
mmap2(NULL, 1230120, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40238000
mprotect(0x40357000, 32768, PROT_NONE) = 0
mmap2(0x4035f000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11f) = 0x4035f000
mmap2(0x40362000, 9512, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40362000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/librt.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\300\26\0\0004\0\0\0"..., 512) = 512
lseek(3, 25312, SEEK_SET) = 25312
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1320) = 1320
lseek(3, 24924, SEEK_SET) = 24924
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0644, st_size=26632, ...}) = 0
mmap2(NULL, 57876, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40063000
mprotect(0x40069000, 28672, PROT_NONE) = 0
mmap2(0x40070000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40070000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\274V\0\0004\0\0\0"..., 512) = 512
lseek(3, 82712, SEEK_SET) = 82712
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1400) = 1400
lseek(3, 82308, SEEK_SET) = 82308
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0755, st_size=116462, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4003c000
mmap2(NULL, 123412, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400ad000
mprotect(0x400c1000, 28672, PROT_NONE) = 0
mmap2(0x400c8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x400c8000
mmap2(0x400ca000, 4628, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x400ca000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libgcc_s.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0`\364\0\0004\0\0\0"..., 512) = 512
lseek(3, 130212, SEEK_SET) = 130212
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1160) = 1160
lseek(3, 129880, SEEK_SET) = 129880
read(3, "A2\0\0\0aeabi\0\1(\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 51) = 51
fstat64(3, {st_mode=S_IFREG|0644, st_size=131372, ...}) = 0
mmap2(NULL, 162704, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400cc000
mprotect(0x400ec000, 28672, PROT_NONE) = 0
mmap2(0x400f3000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1f) = 0x400f3000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4000a000
set_tls(0x4000a4c0, 0x4000ab98, 0x40045048, 0x4000a4c0, 0x40045048) = 0
mprotect(0x400c8000, 4096, PROT_READ) = 0
mprotect(0x40070000, 4096, PROT_READ) = 0
mprotect(0x4035f000, 8192, PROT_READ) = 0
mprotect(0x400ab000, 4096, PROT_READ) = 0
mprotect(0x40132000, 4096, PROT_READ) = 0
mprotect(0x40044000, 4096, PROT_READ) = 0
munmap(0x40046000, 37860) = 0
set_tid_address(0x4000a068) = 2041
set_robust_list(0x4000a070, 0xc) = 0
futex(0xbeb6d5e8, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 1, NULL, 400c9000) = -1 EAGAIN (Resource temporarily unavailable)
rt_sigaction(SIGRTMIN, {0x400b220c, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x400b20b4, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
--- SIGILL (Illegal instruction) @ 0 (0) ---
+++ killed by SIGILL +++
Illegal instruction
Ausgabe von strace sudo lsusb
Und nur für den Fall, dass es einen Unterschied macht, habe ich auch sudo versucht. Nein Illegal Instruction, aber auch keine Ausgabe (wie etwa eine Liste von Geräten).
pi@raspberrypi ~ $ strace sudo lsusb
execve("/usr/bin/sudo", ["sudo", "lsusb"], [/* 27 vars */]) = 0
brk(0) = 0x10e4000
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
access("/etc/suid-debug", F_OK) = -1 ENOENT (No such file or directory)
uname({sys="Linux", node="raspberrypi", ...}) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40001000
access("/etc/ld.so.preload", R_OK) = 0
open("/etc/ld.so.preload", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=44, ...}) = 0
mmap2(NULL, 44, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x40102000
close(3) = 0
open("/usr/lib/arm-linux-gnueabihf/libcofi_rpi.so", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\4\0\0004\0\0\0"..., 512) = 512
lseek(3, 3456, SEEK_SET) = 3456
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1240) = 1240
lseek(3, 2537, SEEK_SET) = 2537
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=7332, ...}) = 0
mmap2(NULL, 35276, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40160000
mprotect(0x40161000, 28672, PROT_NONE) = 0
mmap2(0x40168000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0) = 0x40168000
close(3) = 0
munmap(0x40102000, 44) = 0
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=37860, ...}) = 0
mmap2(NULL, 37860, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4009c000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libselinux.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0TM\0\0004\0\0\0"..., 512) = 512
lseek(3, 107532, SEEK_SET) = 107532
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1120) = 1120
lseek(3, 107244, SEEK_SET) = 107244
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0644, st_size=108652, ...}) = 0
mmap2(NULL, 142424, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x400eb000
mprotect(0x40105000, 28672, PROT_NONE) = 0
mmap2(0x4010c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x19) = 0x4010c000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libutil.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\344\t\0\0004\0\0\0"..., 512) = 512
lseek(3, 8688, SEEK_SET) = 8688
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1160) = 1160
lseek(3, 8356, SEEK_SET) = 8356
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0644, st_size=9848, ...}) = 0
mmap2(NULL, 41128, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40085000
mprotect(0x40087000, 28672, PROT_NONE) = 0
mmap2(0x4008e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x4008e000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libdl.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0(\t\0\0004\0\0\0"..., 512) = 512
lseek(3, 8652, SEEK_SET) = 8652
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1160) = 1160
lseek(3, 8320, SEEK_SET) = 8320
read(3, "A0\0\0\0aeabi\0\1&\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 49) = 49
fstat64(3, {st_mode=S_IFREG|0644, st_size=9812, ...}) = 0
mmap2(NULL, 41136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40090000
mprotect(0x40092000, 28672, PROT_NONE) = 0
mmap2(0x40099000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x40099000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\210y\1\0004\0\0\0"..., 512) = 512
lseek(3, 1186592, SEEK_SET) = 1186592
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1360) = 1360
lseek(3, 1186156, SEEK_SET) = 1186156
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=1187952, ...}) = 0
mmap2(NULL, 1230120, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40169000
mprotect(0x40288000, 32768, PROT_NONE) = 0
mmap2(0x40290000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11f) = 0x40290000
mmap2(0x40293000, 9512, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40293000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4004c000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4009b000
set_tls(0x4009b4c0, 0x4009bbe8, 0x40084048, 0x4009b4c0, 0x40084048) = 0
mprotect(0x40290000, 8192, PROT_READ) = 0
mprotect(0x40099000, 4096, PROT_READ) = 0
mprotect(0x4008e000, 4096, PROT_READ) = 0
mprotect(0x4010c000, 4096, PROT_READ) = 0
mprotect(0x26000, 4096, PROT_READ) = 0
mprotect(0x40083000, 4096, PROT_READ) = 0
munmap(0x4009c000, 37860) = 0
statfs64("/sys/fs/selinux", 88, 0xbef755c8) = -1 ENOENT (No such file or directory)
statfs64("/selinux", 88, {f_type="EXT2_SUPER_MAGIC", f_bsize=4096, f_blocks=931609, f_bfree=555069, f_bavail=507743, f_files=237568, f_ffree=171092, f_fsid={1545102210, 1047066944}, f_namelen=255, f_frsize=4096}) = 0
brk(0) = 0x10e4000
brk(0x1105000) = 0x1105000
open("/proc/filesystems", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x400ae000
read(3, "nodev\tsysfs\nnodev\trootfs\nnodev\tb"..., 1024) = 281
read(3, "", 1024) = 0
close(3) = 0
munmap(0x400ae000, 4096) = 0
open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1534656, ...}) = 0
mmap2(NULL, 1534656, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40296000
close(3) = 0
geteuid32() = 1000
open("/usr/share/locale/locale.alias", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=2570, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4000c000
read(3, "# Locale name alias data base.\n#"..., 4096) = 2570
read(3, "", 4096) = 0
close(3) = 0
munmap(0x4000c000, 4096) = 0
open("/usr/share/locale/en_GB.UTF-8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_GB.utf8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en_GB/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.UTF-8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en.utf8/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/locale/en/LC_MESSAGES/sudo.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "sudo", 4sudo) = 4
write(2, ": ", 2: ) = 2
write(2, "effective uid is not 0, is sudo "..., 54effective uid is not 0, is sudo installed setuid root?) = 54
write(2, "\n", 1
) = 1
close(0) = 0
access("/var/run/utmpx", F_OK) = -1 ENOENT (No such file or directory)
open("/var/run/utmp", O_RDONLY|O_LARGEFILE|O_CLOEXEC) = 0
fcntl64(0, F_GETFD) = 0x1 (flags FD_CLOEXEC)
_llseek(0, 0, [0], SEEK_SET) = 0
setitimer(ITIMER_REAL, {it_interval={0, 0}, it_value={0, 0}}, {it_interval={0, 0}, it_value={0, 0}}) = 0
rt_sigaction(SIGALRM, {0x40265084, [], 0x4000000 /* SA_??? */}, {SIG_DFL, [], 0}, 8) = 0
setitimer(ITIMER_REAL, {it_interval={0, 0}, it_value={10, 0}}, {it_interval={0, 0}, it_value={0, 0}}) = 0
fcntl64(0, F_SETLKW, {type=F_RDLCK, whence=SEEK_SET, start=0, len=0}) = 0
read(0, "\10\0\0\0&\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\2\0\0\0\0\0\0\0~\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\1\0\0\0002N\0\0~\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\10\0\0\0\33\6\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0!\7\0\0tty2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\7\0\0\0u\7\0\0tty1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0#\7\0\0tty4\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0\"\7\0\0tty3\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0%\7\0\0tty6\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0$\7\0\0tty5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\6\0\0\0&\7\0\0ttyAMA0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "\7\0\0\0\7\10\0\0pts/0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 384) = 384
read(0, "", 384) = 0
fcntl64(0, F_SETLKW, {type=F_UNLCK, whence=SEEK_SET, start=0, len=0}) = 0
setitimer(ITIMER_REAL, {it_interval={0, 0}, it_value={0, 0}}, {it_interval={0, 0}, it_value={9, 976098}}) = 0
rt_sigaction(SIGALRM, {SIG_DFL, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
exit_group(1) = ?
tl;dr
Was könnte dazu führen, lsusbdass der Befehl nur auf der Konsole gedruckt Illegal Instructionund dann beendet wird?