Ich bin ziemlich neu bei LaTeX, habe mich aber entschlossen, die .sty-Datei zu verwenden, die die Informatikabteilung meiner Schule für den Stil der Abschlussarbeiten der Universität hatte. Wie sich herausstellte, gibt es eine Reihe von Problemen mit dem Format, also habe ich versucht, sie nacheinander zu beheben. Ich habe es geschafft, Probleme im Zusammenhang mit dem Inhaltsverzeichnis zu beheben, aber ich habe Schwierigkeiten, die Überschriften richtig hinzubekommen.
Gemäß den Richtlinien meiner Schule sollten die Überschriften für die Grundschule, weiterführende Schule und Tertiärschule folgendermaßen aussehen:
aber es kommt so raus:
Hier ist der Code in der .sty-Datei, der das Abschnittskopfzeilenformat steuert:
\def\section{\@startsection{section}{1}{\z@}
{-7ex}{0.01ex \@plus 0.01ex}
{\ssp\centering\underline}}
\def\subsection{\@startsection{subsection}{2}{\z@}
{-5ex}{0.01ex \@plus 0.01ex}
{\ssp\underline}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{-4ex}{-0.01ex}
{\ssp\underline}}
Es scheint, dass die\unterstreichenTag bringt alles durcheinander, denn wenn er entfernt wird, wird die Abschnittsüberschrift zentriert und die Unterabschnittsüberschrift hat keinen Einzug mehr. Wie kann ich diesen Code so korrigieren, dass der Text unterstrichen werden kann, ohne die restliche Formatierung durcheinander zu bringen? Ist es außerdem möglich, am Ende des Unterunterabschnittstitels automatisch einen Punkt und ein Leerzeichen anzufügen?
AKTUALISIEREN:
Ich habe auch ein weiteres Problem mit der Formatierung des Inhaltsverzeichnisses. Wenn ich ein vspace hatte, um eine zusätzliche Zeile zwischen einem Kapiteltitel und dem ersten Abschnitt darunter einzufügen, scheint das Hyperref-Paket den Namen der Kapitel im integrierten Inhaltsverzeichnis des PDFs den von mir im vpsace-Argument angeforderten Platz hinzuzufügen. Wenn ich das PDF also in der Vorschau im Inhaltsverzeichnis der Seitenleiste öffne, werden die Kapitel als „1emChapter 1“ statt als „Chapter 1“ beschriftet, da ich 1em als Argument an \vspace übergeben habe. Der spezifische Codeabschnitt, in dem dies auftritt, ist wie folgt:
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\refstepcounter{chapter}
\typeout{\@chapapp\space\thechapter.}
\ifcsufappend{\addcontentsline{toc}{chapter}{\protect
\numberline{APPENDIX \thechapter.}\hspace*{0.95in}#1}}
\else{\addcontentsline{toc}{chapter}{\vspace{1em}\protect\numberline{\thechapter.}#1} }\fi \else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
% \addtocontents{lof}{\protect\addvspace{10pt}} - do not add space on toc
%\addtocontents{lot}{\protect\addvspace{10pt}} \if@twocolumn
\if@twocolumn
\@topnewpage[\@makechapterhead{#2}]
\else \@makechapterhead{#2}
\@afterheading \fi}
\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
Hier ist ein MWE-Dokument:
\documentclass[12pt]{report}
\usepackage{csuf-thesis}
\usepackage{hyperref}
\hypersetup{colorlinks=false}
\nocopyright
\setcounter{secnumdepth}{0}
\begin{document}
\maketitle
\begin{abstract}
Abstract goes here
\end{abstract}
\tableofcontents
\startbody
%% Assuming these .tex files exist...
\include{Chapter1}
\include{Chapter2}
\include{Chapter3}
\include{Chapter4}
\end{document}
Wobei ChapterX.tex ungefähr so aussieht:
\chapter{CHAPTER X}
\section{Primary Heading}
\subsection{Secondary Heading}
\subsubsection{Tertiary Heading}
Hier ist die vollständige Datei csuf-thesis.sty, mit der ich derzeit arbeite:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% This is a LaTeX style file created by Dr. Shawn X. Wang for CSUF Theses. %%
%% Several existing style files were referenced during the process, in particular, %%
%% University of California, Princeton University, Harvard University, Standford %%
%% University and New Jersey Institute of Technology. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%
% DECLARATIONS %
%%%%%%%%%%%%%%%%
\newif\ifcsufcopyright % copyright page switch
\newif\ifcsufappend % appendixswitch
\csufcopyrightfalse
\csufappendfalse
\def\@chapapp{CHAPTER} %caps for chapter
\gdef\csufthisdegree{Master of Arts}
\def\thisdegree#1{\gdef\csufthisdegree{#1}}
\gdef\csufthesistype{Thesis}
\def\thesistype#1{\gdef\csufthesistype{#1}}
%% Changed to reflect the semester by month instead of actual month
\gdef\csufthesissemester{\ifcase\month\or
Fall\or Spring\or Spring\or Spring\or Spring\or Spring\or
Summer\or Summer\or Summer\or Summer\or Fall\or Fall\fi}
\def\thesismonth#1{\gdef\csufthesissemester{#1}}
\gdef\csufthesisyear{\number\year}
\def\thesisyear#1{\gdef\csufthesisyear{#1}}
\gdef\csufmajor{(*MAJOR GOES HERE*)}
\def\major#1{\gdef\csufmajor{#1}}
\gdef\csufadvisor{(*RESEARCH ADVISOR'S NAME*)}
\def\advisor#1{\gdef\csufadvisor{#1}}
\gdef\csufadvisordept{(*Advisor's department*)}
\def\advisordept#1{\gdef\csufadvisordept{#1}}
\gdef\csuffirstcomm{(*first committee member's name*)}
\def\firstcomm#1{\gdef\csuffirstcomm{#1}}
\gdef\csuffirstcommdept{(*first committee member's department*)}
\def\firstcommdept#1{\gdef\csuffirstcommdept{#1}}
\gdef\csufsecondcomm{(*second committee member's name*)}
\def\secondcomm#1{\gdef\csufsecondcomm{#1}}
\gdef\csufsecondcommdept{(*second committee member's department*)}
\def\secondcommdept#1{\gdef\csufsecondcommdept{#1}}
\gdef\csufblank{blank}
% If you want copyright, do the following
\def\yescopyright {
\csufcopyrighttrue
}
\def\nocopyright {
\csufcopyrightfalse
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%
% MARGINS AND PAGE LAYOUT %
%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Pages are numbered at the upper right,
% except that the first page of each chapter
% is numbered at the bottom.
\pagestyle{plain}
% This counter is used to select which sections should be displayed in TOC.
\newcounter{csufsec}
\setcounter{csufsec}{2}
\newcounter{csufcommittee}
\setcounter{csufcommittee}{3}
\newcounter{csufnum}
% We need 1 1/2" margin
% Theses are single-sided, so we don't care about \evensidemargin
\evensidemargin=0in
%%\footheight=0.2in
\footskip=0.5in % default is 0.5 in and page numbers come out too low
\headsep=0.25in % Distance between page nums and text
\itemindent=0.8in
%\marginparsep=10pt
%\marginparwidth=40pt
\oddsidemargin=0.5in % was 0.495
\parindent=0.4in
\textheight=8.22in %changed to make 1" at the bottom
\textwidth=5.95in
\topmargin=-0.175in % Put the pagenumber in the correct place
% Disallow page breaks at hyphens, except where the only alternative
% is a widow or orphan (club)
\brokenpenalty=9900
% Disallow all widows and orphans (clubs)
\widowpenalty=10000
\clubpenalty=10000
% Use 1.65 times the normal baseline-to-baseline skip
% for the appearance of double spacing
\renewcommand{\baselinestretch}{1.65}
% Print footnotes in small (not tiny) type
\let\footnotesize\small
% Single space tabular environment - cdp
\def\tabular{\ssp \def\@halignto{}\@tabular}
% Redefine the macro used for floats (including figures and tables)
% so that single spacing is used.
% (Note \def\figure{\@float{figure}set single spacing} doesn't work
% because figure has an optional argument)
\def\@xfloat#1[#2]{\ifhmode \@bsphack\@floatpenalty -\@Mii\else
\@floatpenalty-\@Miii\fi\def\@captype{#1}\ifinner
\@parmoderr\@floatpenalty\z@
\else\@next\@currbox\@freelist{\@tempcnta\csname ftype@#1\endcsname
\multiply\@tempcnta\@xxxii\advance\@tempcnta\sixt@@n
\@tfor \@tempa :=#2\do
{\if\@tempa h\advance\@tempcnta \@ne\fi
\if\@tempa t\advance\@tempcnta \tw@\fi
\if\@tempa b\advance\@tempcnta 4\relax\fi
\if\@tempa p\advance\@tempcnta 8\relax\fi
}\global\count\@currbox\@tempcnta}\@fltovf\fi
\global\setbox\@currbox\vbox\bgroup
\def\baselinestretch{1}\@normalsize
\boxmaxdepth\z@
\hsize\columnwidth \@parboxrestore}
% Redefine the macro used for footnotes to use single spacing
\long\def\@footnotetext#1{\insert\footins{\def\baselinestretch{1}\footnotesize
\interlinepenalty\interfootnotelinepenalty
\splittopskip\footnotesep
\splitmaxdepth \dp\strutbox \floatingpenalty \@MM
\hsize\columnwidth \@parboxrestore
\edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}\@makefntext
{\rule{\z@}{\footnotesep}\ignorespaces
#1\strut \\ }}}
% Define environment 'singlespace', which can be used within other
% environments such as 'quote' (but not 'verbatim') to force single
% spacing. From doublespace.sty; originally credited to MIT.
\def\singlespace{%
\vskip\parskip%
\vskip\baselineskip%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\parskip%
\vskip-\baselineskip%
}
\def\endsinglespace{\par}
% Redefine 'verbatim' so that it always single-spaces.
% If you want 'verbatim' to double-space, simply make your own
% copy of csuf-thesis.sty in which this code is commented out.
\def\@verbatim{%
\trivlist%
\vskip\topskip%
%\vskip\parskip%
%\setlength{\partopsep}{0pt}%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\topskip%
%\vskip-\parskip%
\item[]\if@minipage\else\vskip\parskip\fi
\leftskip\@totalleftmargin\rightskip\z@
\parindent\z@\parfillskip\@flushglue\parskip\z@
\@tempswafalse \def\par{\if@tempswa\hbox{}\fi\@tempswatrue\@@par}
\obeylines \tt \catcode``=13 \@noligs \let\do\@makeother \dospecials}
\def\verbatim{\@verbatim \frenchspacing\@vobeyspaces \@xverbatim}
\let\endverbatim=\endtrivlist
%%%%%%%%%%%%%%%%%%%%
% CHAPTER HEADINGS %
%%%%%%%%%%%%%%%%%%%%
% Centered at top of page, in imitation of Turabian et al.
% This code is from rep12.sty, somewhat modified.
% \@makechapterhead {TEXT} : Makes the heading for the \chapter command.
%
\def\@makechapterhead#1{ % Heading for \chapter command
\vspace*{.38in} % Space at top of text page.
{ \parindent 0pt \raggedright
\ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 THEN
\ssp
\centerline{\@chapapp{} \thechapter} % Print 'CHAPTER' and number.
\par
\vskip 10pt
\fi % Space between number and title.
\ssp
\center % Title.
#1 \par
\nobreak % TeX penalty to prevent page break.
\vskip 27pt % Space between title and text.
} }
% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* command.
%
\def\@makeschapterhead#1{ % Heading for \chapter* command
%\vspace*{50pt} % Space at top of page.
{ \parindent 0pt \raggedright
\ssp
\bf \center % Title
#1 \par
\nobreak % TeX penalty to prevent page break.
\vskip 15pt % Space between title and text.
} }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This was done to place the appendix chapter title on the TOC. %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\chapter{\clearpage \thispagestyle{plain} \global\@topnum\z@
\@afterindentfalse \secdef\@chapter\@schapter}
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\refstepcounter{chapter}
\typeout{\@chapapp\space\thechapter.}
\ifcsufappend{\addcontentsline{toc}{chapter}{\protect
\numberline{APPENDIX \thechapter.}\hspace*{0.95in}#1}}
\else{\addcontentsline{toc}{chapter}{\vspace{1em}\protect\numberline{\thechapter.}#1} }\fi \else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
% \addtocontents{lof}{\protect\addvspace{10pt}} - do not add space on toc
%\addtocontents{lot}{\protect\addvspace{10pt}} \if@twocolumn
\if@twocolumn
\@topnewpage[\@makechapterhead{#2}]
\else \@makechapterhead{#2}
\@afterheading \fi}
\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
%
% Do the right thing for an appendix
%
\def\appendix{
\par
\setcounter{chapter}{0}
\setcounter{equation}{0}
% \def\@chapapp{}
% \def\thechapter{APPENDIX \Alph{chapter}}
\def\@chapapp{APPENDIX}
\def\thechapter{\Alph{chapter}}
\def\thesection{\Alph{chapter}.\arabic{section}}
\renewcommand{\theequation}{\Alph{chapter}.\arabic{equation}}
\csufappendtrue
\setcounter{csufsec}{0} % do not print appendix sections
% The following lines would do what I want, but they are set BEFORE the
% begin{document} :-(
% \setcounter{tocdepth}{1} % List appendix and sections on toc
% \def\l@chapter{\@dottedtocline{1}{0.000001mm}{10em}}
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% SECTION AND SUBSECTION HEADINGS %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% from rep12.sty - with local mods
\def\section{\@startsection{section}{1}{\z@}
{-7ex}{0.01ex \@plus 0.01ex}
{\ssp\centering\underline}}
\def\subsection{\@startsection{subsection}{2}{\z@}
{-5ex}{0.01ex \@plus 0.01ex}
{\ssp\underline}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{-4ex}{-0.01ex}
{\ssp\underline}}
%%%%%%%%%%%%%%%%%%%%%
% TABLE OF CONTENTS %
%%%%%%%%%%%%%%%%%%%%%
\newsavebox{\toctopbox}
\savebox{\toctopbox}[\textwidth]{Chapter \hfill}
%
\def\tableofcontents{\pagestyle{plain}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
%
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont TABLE OF CONTENTS}\@mkboth {TABLE OF CONTENTS}{TABLE OF CONTENTS}}
% Figure \hfill Page \par %\vspace{1em}
% The next line puts the heading in the **FIRST** toc page. Here it
% goes in with the text.
%\usebox{\toctopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\toc1}
% process the actual entries
\vskip -1em
{\ssp \@starttoc{toc}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
\if@restonecol
\twocolumn\fi
\newpage
\pagestyle{myheadings}\markboth{}{}}
\def\toc1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \par\vspace{2ex}}}
% The following section is for chapter and section titles in the body
% It will not split words
\def\l@part#1#2{\addpenalty{-\@highpenalty}
\addvspace{2.25em plus 11pt} % space above part line
\begingroup
\@tempdima 3em % width of box holding part number,
\parindent \z@ \rightskip \@pnumwidth % used by \numberline
\parfillskip -\@pnumwidth
{\bf
\leavevmode % TeX command to enter horizontal mode
#1\hfil \hbox to\@pnumwidth{\hss #2}
}\par
\nobreak % Never break after part entry
\endgroup}
\def\thedots{\cleaders\hbox{$\m@th \mkern4.5mu . \mkern4.5mu$}\hfill}
% a sinlge line space is added in front of each chapter title in the TOC
\def\l@chapter{\vspace{12pt} \@dottedtocline{1}{0.000001mm}{1.4em}}
%\def\l@section{\@dottedtocline{1}{2em}{2em}}
\def\l@section{\@dottedtocline{1}{1.4em}{2.3em}}
%\def\l@subsection{\@dottedtocline{2}{4em}{3em}}
\def\l@subsection{\@dottedtocline{2}{3.7em}{3em}}
\def\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\def\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\def\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
%%%%%%%%%%%%%%%%%%%
% List of Figures %
%%%%%%%%%%%%%%%%%%%
\newsavebox{\loftopbox}
\savebox{\loftopbox}[\textwidth]{\hspace{-0.8in}Figure \hspace{5.1in}Page}
%
\def\listoffigures{\pagestyle{plain}
\addcontentsline{toc}{chapter}{LIST OF FIGURES}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont LIST OF FIGURES}\@mkboth {LIST OF FIGURES}{LIST OF FIGURES}}
\usebox{\loftopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\lof1}
% process the actual entries
\vskip 1.8ex
{\ssp \@starttoc{lof}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
% and put the lof in the table of contents
%\addcontentsline{toc}{pchapter}{{\sc \listfigurename}}
\if@restonecol
\twocolumn\fi \newpage
\pagestyle{myheadings}\markboth{}{}}
\def\lof1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \usebox{\loftopbox} \par\vspace{2ex}}}
\def\l@figure{\@dottedtocline{1}{0.001em}{2.5em}}
%%%%%%%%%%%%%%%%%%
% List of Tables %
%%%%%%%%%%%%%%%%%%
\newsavebox{\lottopbox}
\savebox{\lottopbox}[\textwidth]{\hspace{-0.8in}Table \hspace{5.2in}Page}
%
\def\listoftables{\pagestyle{plain}
\addcontentsline{toc}{chapter}{LIST OF TABLES}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
%
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont LIST OF TABLES}\@mkboth {LIST OF TABLES}{LIST OF TABLES}}
% Figure \hfill Page \par %\vspace{1em}
% The next line puts the heading in the **FIRST** toc page. Here it
% goes in with the text.
\usebox{\lottopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\lot1}
% process the actual entries
\vskip 1.8ex
{\ssp \@starttoc{lot}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
\if@restonecol
\twocolumn\fi \newpage
\pagestyle{myheadings}\markboth{}{}}
\def\lot1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \usebox{\lottopbox} \par\vspace{2ex}}}
\let\l@table\l@figure
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% TITLE, COPYRIGHT, AND SIGNATURE PAGES %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Code taken from titlepage.sty and modified extensively.
% \maketitle generates title page, copyright page, and signature page.
\def\maketitle{
%
% Title page
%
\newpage
\setcounter{page}{1}
\thispagestyle{empty}
\pagenumbering{roman}
\hspace{.7in}
\begin{minipage}[t]{3in}
{\ssp
\begin{center}
\@title
\end{center}
}
\vspace{-.3in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
A Thesis \\
%\vspace{-3pt}
Presented to the \\
%\vspace{-3pt}
Faculty of \\
%\vspace{-3pt}
California State University, Fullerton \\
\end{center}
\vspace{-.35in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
in Partial Fulfillment \\
%\vspace{-3pt}
of the Requirements for the Degree \\
%\vspace{-3pt}
\csufthisdegree \\
%\vspace{-3pt}
in \\
%\vspace{-3pt}
\csufmajor
\end{center}
\vspace{-.35in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
By \\
%\vspace{-3pt}
\@author \\
\ \\
\ \\
\end{center}
\end{minipage}
%\hspace{.7in}
\begin{minipage}[t]{4.4in}{\ssp
\begin{center}
Thesis Committee Approval: \\
\ \\
\csufadvisor, Chair \\
\csuffirstcomm, \csuffirstcommdept \\
\csufsecondcomm, \csufsecondcommdept \\
\ \\
\ \\
\csufthesissemester, \csufthesisyear
\end{center}
}
\end{minipage}
\ifcsufcopyright
{
\typeout{* }
\typeout{* Generating copyright page. Use \noexpand\nocopyright if you don't want it.}
\typeout{* }
\newpage
\thispagestyle{empty}
\vspace*{3.5in}
\begin{center}
Copyright \copyright ~ \csufthesisyear ~ by
\@author \par
ALL RIGHTS RESERVED\par
\end{center}
\stepcounter{page}
}
\else {
\typeout{* }
\typeout{* No copyright page created (page number has been incremented.)}
\typeout{* Remember to insert a blank page in your thesis in this location.}
\typeout{* MS students use \noexpand\yescopyright if you want one (you will need to file}
\typeout{* paperwork with the United States Copyright Office to make it official).}
\typeout{* }
}
\fi
%
%
%
\setcounter{footnote}{0} % Footnotes start at zero again.
\gdef\@thanks{}
%\gdef\@author{}
\gdef\@title{}
\let\maketitle\relax}
%%%%%%%%%%%%%%%%%%%%
% ABSTRACT PAGE(S) %
%%%%%%%%%%%%%%%%%%%%
% Delimited by \begin{abstract} and \end{abstract}, which
% should enclose only the text of the abstract.
% The abstract should be no more than one page
\def\abstract{
\pagestyle{empty}
\addcontentsline{toc}{chapter}{ABSTRACT}
{\begin{center}
\vspace*{0.25in}
ABSTRACT
\vskip 0.25in
\end{center}
}
\large \normalsize % force return to normal line spacing
\par
}
\def\endabstract{
\thispagestyle{plain}
\vskip 12pt
\par \noindent
\par
\vfil\null
}
\def\dedication{
\newpage
\ssp
\thispagestyle{plain}
\addcontentsline{toc}{chapter}{DEDICATION}
\vspace*{\fill}
\begin{center}
}
\def\enddedication{
\end{center}
\vspace*{\fill}
\dsp
}
\def\acknowledgement{
\large \normalsize % force return to normal line spacing
\par
\dsp
\newpage
\thispagestyle{plain}
\addcontentsline{toc}{chapter}{ACKNOWLEDGMENT}
\vspace*{.27in}
{\par \normalsize \centerline {ACKNOWLEDGMENT}}
\vskip 1em
}
\def\endacknowlegdement{
\newpage
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% References %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\@bibitem#1{\item\if@filesw \immediate\write\@auxout
{\string\bibcite{#1}{\the\value{\@listctr}}}\fi\ignorespaces
\hskip -0.45in}
\def\@lbibitem[#1]#2{\item[\@biblabel{#1}\hfill]\if@filesw
{\def\protect##1{\string ##1\space}\immediate
\write\@auxout{\string\bibcite{#2}{#1}}}\fi\ignorespaces
\hskip -0.45in}
\def\thebibliography#1{\chapter*{\vspace*{.43in} \centerline{\normalfont REFERENCES}
%\addcontentsline{toc}{chapter}{\protect \numberline{REFERENCES}}
\addcontentsline{toc}{chapter}{REFERENCES}
\@mkboth{BIBLIOGRAPHY}{BIBLIOGRAPHY}}\list
% {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
{\arabic{enumi}.}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
\advance\leftmargin\labelsep
\advance\leftmargin 0.45in
\advance\labelsep 0.45in
\usecounter{enumi}}
\def\newblock{\hskip .11em plus .33em minus .07em}
\sloppy\clubpenalty4000\widowpenalty4000
\sfcode`\.=1000\relax \ssp}
\let\endthebibliography=\endlist
\long\def\@makecaption#1#2{
\vskip 10pt
\setbox\@tempboxa\hbox{\small{{\bf #1} #2}}
% \ifdim \wd\@tempboxa >\hsize #1: #2\par \else \hbox
%to\hsize{\hfil\box\@tempboxa\hfil}
% \fi}
\ifdim \wd\@tempboxa >\hsize \small{{\sl #1.} #2}\par \else \hbox
to\hsize{\hfil\box\@tempboxa\hfil}
\fi}
% Wanted () instead of []
%\def\@cite#1#2{({#1\if@tempswa , #2\fi})}
%\def\@biblabel#1{(#1)\hfill}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This allows single spacing easily in the figure mode - from ucthesis.sty %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\ssp{\def\baselinestretch{1.0}\large\normalsize}
\def\msp{\def\baselinestretch{1.2}\large\normalsize}
\def\dsp{\def\baselinestretch{1.65}\large\normalsize}
\def\startbody{
\pagestyle{myheadings}
\markboth{}{}
\newpage
\pagenumbering{arabic}
\setcounter{chapter}{0}
}
%%%%%%%%%%%%%%
% All done ! %
%%%%%%%%%%%%%%
\typeout{* }
\typeout{* CSUF style sheet loaded.}
\typeout{* --------------------------------------------------------------------------}
Antwort1
Vorausgesetzt, Sie benötigen die Star-Versionen von \sectionet al nicht:
\documentclass[12pt]{report}
\usepackage{csuf-thesis}
\usepackage{hyperref}
\hypersetup{colorlinks=false}
\nocopyright
\setcounter{secnumdepth}{0}
\makeatletter
\def\section#1{\@startsection{section}{1}{\z@}
{-7ex}{2ex \@plus 0.01ex}
{\centering\ssp}{\underline{#1}}}
\def\subsection#1{\@startsection{subsection}{2}{\z@}
{-5ex}{1ex \@plus 0.01ex}
{\ssp}{\underline{#1}}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{4ex}{-1em}
{\kern\parindent\ssp\underline }}
\makeatother
[ ... ]
