Hat jemand eine Latex-Vorlage für das IETE Journal of Research? Ich habe keine Latex-Vorlage gefunden. Wie verwende ich eine Latex-Vorlage, um ihre Richtlinien zu befolgen? Bitte helfen Sie.
Antwort1
Für die Einreichung beim IETE Journal of Research benötigen Sie nur die .pdfDatei. Sie können also die Standardklasse verwenden article. Sobald Ihr Beitrag zur Veröffentlichung angenommen wurde, kümmert sich die Redaktion um den Rest (Stilanforderungen).
Wenn Sie jedoch die verwenden möchten LaTeX template, habe ich eine Datei bearbeitet, .clsdie die meisten Anforderungen der IETE journal of ResearchStile erfüllt. Legen Sie sowohl die IETEJR.clsals auch die template.texin einen Ordner und bereiten Sie Ihr Papier vor.
Vorlage.tex
\documentclass[twocolumn]{IETEJR}
\begin{document}
\title{Template for submission of papers to IETE Journal of Research}
\author{ First A. Author, Second B. Author, Jr., and Third C. Author\\
\vspace*{0.05em}\\\small F. A. Author is with the National Institute of Standards and Technology,\\\small Boulder, CO 80305 USA (corresponding author to provide phone: 303-555-5555;\\\small fax: 303-555-5555; e-mail: author@ boulder.nist.gov). \\
\small S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA.\\\small He is now with the Department of Physics, Colorado State University,\\\small Fort Collins, CO 80523 USA (e-mail: [email protected]).\\
\small T. C. Author is with the Electrical Engineering Department,\\\small University of Colorado, Boulder, CO 80309 USA, on leave from the \\\small National Research Institute for Metals,\\\small Tsukuba, Japan (e-mail: [email protected]).}
\twocolumn[
\begin{@twocolumnfalse}
\maketitle
\begin{abstract}
Fill the text from your manuscript in different sections. ...
\end{abstract}
\begin{keywords}
About six to fifteen key words or phrases in alphabetical order, separated by commas. For a list of suggested keywords, visit http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt
\end{keywords}
\end{@twocolumnfalse}
]
\section{INTRODUCTION}
Fill the text from your manuscript
\section{SECTION TWO}
\subsection{Sub-section Head Style}
Fill the text from your manuscript
\subsubsection{Subsubsection Heading Here}
Fill the text from your manuscript
\subsubsection{Subsubsection Heading Here}
Fill the text from your manuscript in different sections.
\subsection{Subsection Heading Here}
Fill the text from your manuscript in different sections.
\section{CONCLUSION}
The conclusion goes here.
%\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
\section{}
Appendix two text goes here.
% use section* for acknowledgement
\section*{ACKNOWLEDGMENT}
The authors would like to thank...
\begin{thebibliography}{00}
\bibitem{1}R. Roy, and T. Kailath, “ESPRIT\_estimation of signal parameters via rotational invariance techniques,” IEEE Trans. Acoust. Speech Signal Process, Vol. 37, no. 7, pp. 984-95, Jul. 1989.
\bibitem{2} V. Wowk, Machinery Vibration, Measurement and Analysis. New York: McGraw-Hill, 1991.
\bibitem{3} Case Western Reserve University Bearing Data Center. Available: http://csegroups.case.edu/bearingdatacenter/pa\\ges/downloaddata-file, accessed Apr. 2013.
\bibitem{4} B. Li, M.-Y. Chow, Y. Tipsuwan, and J. C. Hung, “Neural network based motor rolling bearing fault diagnosis,” IEEE Trans. Ind. Electron.,Vol. 47, no. 5, pp. 1060\_9, Oct. 2000.
\bibitem{5} J. Altmann, and J. Mathew, “Multiple band-pass autoregressive demodulation for rolling element bearing fault diagnosis,” Mech. Syst. Signal Process., Vol. 15, no. 5, pp. 963\_77, Sep. 2001.
\bibitem{6} B. Samanta, and K. R. Al-Balushi, “Artificial neural network based fault diagnostics of rolling element bearings using time domain features,” Mech. Syst. Signal Process., Vol. 17, no. 2, pp. 317\_28, Mar. 2003.
\bibitem{7} B. S. Yang, T. Han, and J. L. An, “ART\_KOHONEN neural network for fault diagnosis of rotating machinery,” Mech. Syst. Signal Process., Vol. 18, no. 3, pp. 645\_57, May 2004.
\bibitem{8} L. Zhang, L. B. Jack, and A. K. Nandi, “Fault detection using genetic programming,” Mech. Syst. Signal Process., Vol. 19, no. 2, pp. 271\_89, Mar. 2005.
\bibitem{9} A. Saxena, and A. Saad, “Evolving an artificial neural network classifier for condition monitoring of rotating mechanical systems,” Appl. Soft Computer., Vol. 7, no. 1, pp. 441\_54, Jan. 2007.
\bibitem{10} B. Zhang, C. Sconyers, C. Byington, R. Patrick, M. Orchard, and G. Vachtsevanos, “A probabilistic fault detection approach: Application to bearing fault detection,” IEEE Trans. Ind. Electron., Vol. 58, no. 5,
pp. 2011\_8, May 2011.
\bibitem{11} Y. Jianbo, “Local and nonlocal preserving projection for bearing defect classification and performance assessment,” IEEE Trans. Ind. Electron., Vol. 59, no. 5, pp. 2363\_76, May 2012.
\bibitem{12} M. D. Prieto, G. Cirrincione, A. G Espinosa, J. A. Ortega, and H. Henao, “Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks,”IEEE Trans. Ind. Electron., Vol. 60, no. 8, pp. 3398\_407, Aug. 2013.
\end{thebibliography}
\section*{Note}\bf\large Manuscript length should be limited up to 10 pages including figures, tables, references, author’s bio and photo etc. After final checks, if the typeset manuscript exceeds 06 pages length, the author will be charged (after 06) per page @ Rs.1,000/- (for Indian Authors) and 50 USD (for Foreign Authors).
\end{document}
Die IETEJR.clsDatei ist
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}[1995/12/01]
\ProvidesClass{IETEJR}[2016/02/09 V1.0 by Litun John]
%\LoadClass[twocolumn]{article}
\newcommand\@ptsize{}
\newif\if@restonecol
\newif\if@titlepage
\@titlepagefalse
\if@compatibility\else
\DeclareOption{a4paper}
{\setlength\paperheight {297mm}%
\setlength\paperwidth {210mm}}
\DeclareOption{a5paper}
{\setlength\paperheight {210mm}%
\setlength\paperwidth {148mm}}
\DeclareOption{b5paper}
{\setlength\paperheight {250mm}%
\setlength\paperwidth {176mm}}
\DeclareOption{letterpaper}
{\setlength\paperheight {11in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{legalpaper}
{\setlength\paperheight {14in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{executivepaper}
{\setlength\paperheight {10.5in}%
\setlength\paperwidth {7.25in}}
\DeclareOption{landscape}
{\setlength\@tempdima {\paperheight}%
\setlength\paperheight {\paperwidth}%
\setlength\paperwidth {\@tempdima}}
\fi
\if@compatibility
\renewcommand\@ptsize{0}
\else
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\fi
\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
\if@compatibility\else
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\fi
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\if@compatibility\else
\DeclareOption{final}{\setlength\overfullrule{0pt}}
\fi
\DeclareOption{titlepage}{\@titlepagetrue}
\if@compatibility\else
\DeclareOption{notitlepage}{\@titlepagefalse}
\fi
\if@compatibility\else
\DeclareOption{onecolumn}{\@twocolumnfalse}
\fi
\DeclareOption{twocolumn}{\@twocolumntrue}
\DeclareOption{leqno}{\input{leqno.clo}}
\DeclareOption{fleqn}{\input{fleqn.clo}}
\DeclareOption{openbib}{%
\AtEndOfPackage{%
\renewcommand\@openbib@code{%
\advance\leftmargin\bibindent
\itemindent -\bibindent
\listparindent \itemindent
\parsep \z@
}%
\renewcommand\newblock{\par}}%
}
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
\ProcessOptions
\input{size1\@ptsize.clo}
\setlength\lineskip{1\p@}
\setlength\normallineskip{1\p@}
\renewcommand\baselinestretch{}
\setlength\parskip{0\p@ \@plus \p@}
\@lowpenalty 51
\@medpenalty 151
\@highpenalty 301
\setcounter{topnumber}{2}
\renewcommand\topfraction{.7}
\setcounter{bottomnumber}{1}
\renewcommand\bottomfraction{.3}
\setcounter{totalnumber}{3}
\renewcommand\textfraction{.2}
\renewcommand\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\renewcommand\dbltopfraction{.7}
\renewcommand\dblfloatpagefraction{.5}
\if@twoside
\def\ps@headings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection\quad
\fi
##1}}{}}%
\def\subsectionmark##1{%
\markright {%
\ifnum \c@secnumdepth >\@ne
\thesubsection\quad
\fi
##1}}}
\else
\def\ps@headings{%
\let\@oddfoot\@empty
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
\thesection\quad
\fi
##1}}}}
\fi
\def\ps@myheadings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\@gobbletwo
\let\sectionmark\@gobble
\let\subsectionmark\@gobble
}
\if@titlepage
\newcommand\maketitle{\begin{titlepage}%
\let\footnotesize\small
\let\footnoterule\relax
\let \footnote \thanks
\null\vfil
\vskip 60\p@
\begin{center}%
{\LARGE \@title \par}%
\vskip 3em%
{\large
\lineskip .75em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1.5em%
{\large \@date \par}% % Set date in \large size.
\end{center}\par
\@thanks
\vfil\null
\end{titlepage}%
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\else
\newcommand\maketitle{\par
\begingroup
\renewcommand\thefootnote{\@fnsymbol\c@footnote}%
\def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
\long\def\@makefntext##1{\parindent 1em\noindent
\hb@[email protected]{%
\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
\if@twocolumn
\ifnum \col@number=\@ne
\@maketitle
\else
\twocolumn[\@maketitle]%
\fi
\else
\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle
\fi
\thispagestyle{plain}\@thanks
\endgroup
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\def\@maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\LARGE \bfseries\@title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1em%
{\large \@date}%
\end{center}%
\par
\vskip 1.5em}
\fi
\setcounter{secnumdepth}{3}
\newcounter {part}
\newcounter {section}
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
\renewcommand \thepart {\@Roman\c@part}
\renewcommand \thesection {\@arabic\c@section.}
\renewcommand\thesubsection {\thesection\@arabic\c@subsection}
\renewcommand\thesubsubsection{\thesubsection.\@arabic\c@subsubsection}
\renewcommand\theparagraph {\thesubsubsection\@arabic\c@paragraph}
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
\newcommand\part{\par
\addvspace{4ex}%
\@afterindentfalse
\secdef\@part\@spart}
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >\m@ne
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\ifnum \c@secnumdepth >\m@ne
\Large\bfseries \partname~\thepart
\par\nobreak
\fi
\huge \bfseries #2%
\markboth{}{}\par}%
\nobreak
\vskip 3ex
\@afterheading}
\def\@spart#1{%
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\huge \bfseries #1\par}%
\nobreak
\vskip 3ex
\@afterheading}
\newcommand\section{\@startsection {section}{1}{\z@}%
{-3.5ex \@plus -1ex \@minus -.2ex}%
{1.3ex \@plus.2ex}%
{\normalfont\Large\bfseries}}
\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.0ex \@plus .2ex}%
{\normalfont\large\bfseries}}
\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{-2.25ex\@plus -1ex \@minus -.2ex}%
{1.0ex \@plus .2ex}%
{\normalfont\normalsize\itshape}}
\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
{3.25ex \@plus1ex \@minus.2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
{3.25ex \@plus1ex \@minus .2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\if@twocolumn
\setlength\leftmargini {2em}
\else
\setlength\leftmargini {2.5em}
\fi
\leftmargin \leftmargini
\setlength\leftmarginii {2.2em}
\setlength\leftmarginiii {1.87em}
\setlength\leftmarginiv {1.7em}
\if@twocolumn
\setlength\leftmarginv {.5em}
\setlength\leftmarginvi {.5em}
\else
\setlength\leftmarginv {1em}
\setlength\leftmarginvi {1em}
\fi
\setlength \labelsep {.5em}
\setlength \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
\@beginparpenalty -\@lowpenalty
\@endparpenalty -\@lowpenalty
\@itempenalty -\@lowpenalty
\renewcommand\theenumi{\@arabic\c@enumi}
\renewcommand\theenumii{\@alph\c@enumii}
\renewcommand\theenumiii{\@roman\c@enumiii}
\renewcommand\theenumiv{\@Alph\c@enumiv}
\newcommand\labelenumi{\theenumi.}
\newcommand\labelenumii{(\theenumii)}
\newcommand\labelenumiii{\theenumiii.}
\newcommand\labelenumiv{\theenumiv.}
\renewcommand\p@enumii{\theenumi}
\renewcommand\p@enumiii{\theenumi(\theenumii)}
\renewcommand\p@enumiv{\p@enumiii\theenumiii}
\newcommand\labelitemi{\textbullet}
\newcommand\labelitemii{\normalfont\bfseries \textendash}
\newcommand\labelitemiii{\textasteriskcentered}
\newcommand\labelitemiv{\textperiodcentered}
\newenvironment{description}
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
{\endlist}
\newcommand*\descriptionlabel[1]{\hspace\labelsep
\normalfont\bfseries #1}
\if@titlepage
\newenvironment{abstract}{%
\titlepage
\null\vfil
\@beginparpenalty\@lowpenalty
%\begin{center}%
\bfseries \abstractname
\@endparpenalty\@M
% \end{center}}%
{\par\vfil\null\endtitlepage}
\else
\newenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\small
%\begin{center}%
{\bfseries \abstractname\vspace{-.2em}\vspace{\z@}}%
% \end{center}%
\quotation
\fi}
%{\if@twocolumn\else\endquotation\fi}
\fi
\newenvironment{verse}
{\let\\\@centercr
\list{}{\itemsep \z@
\itemindent -1.5em%
\listparindent\itemindent
\rightmargin \leftmargin
\advance\leftmargin 1.5em}%
\item\relax}
{\endlist}
\newenvironment{quotation}
{\list{}{\listparindent 1.5em%
\itemindent \listparindent
\rightmargin \leftmargin
\parsep \z@ \@plus\p@}%
\item\relax}
{\endlist}
\newenvironment{quote}
{\list{}{\rightmargin\leftmargin}%
\item\relax}
{\endlist}
\if@compatibility
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\z@
}%
{\if@restonecol\twocolumn \else \newpage \fi
}
\else
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\@ne
}%
{\if@restonecol\twocolumn \else \newpage \fi
\if@twoside\else
\setcounter{page}\@ne
\fi
}
\fi
%keywords
\def\keywords{\par\addvspace\medskipamount{\rightskip=0pt plus1cm
\def\and{\ifhmode\unskip\nobreak\fi\
}\noindent\keywordname\enspace\ignorespaces \par}}
\def\keywordname{{\bfseries Keywords:}}
\newcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\renewcommand\thesection{\@Alph\c@section}}
\setlength\arraycolsep{5\p@}
\setlength\tabcolsep{6\p@}
\setlength\arrayrulewidth{.4\p@}
\setlength\doublerulesep{2\p@}
\setlength\tabbingsep{\labelsep}
\skip\@mpfootins = \skip\footins
\setlength\fboxsep{3\p@}
\setlength\fboxrule{.4\p@}
\renewcommand \theequation {\@arabic\c@equation}
\newcounter{figure}
\renewcommand \thefigure {\@arabic\c@figure}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{\figurename~\thefigure}
\newenvironment{figure}
{\@float{figure}}
{\end@float}
\newenvironment{figure*}
{\@dblfloat{figure}}
{\end@dblfloat}
\newcounter{table}
\renewcommand\thetable{\@arabic\c@table}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{\tablename~\thetable}
\newenvironment{table}
{\@float{table}}
{\end@float}
\newenvironment{table*}
{\@dblfloat{table}}
{\end@dblfloat}
\newlength\abovecaptionskip
\newlength\belowcaptionskip
\setlength\abovecaptionskip{10\p@}
\setlength\belowcaptionskip{0\p@}
\long\def\@makecaption#1#2{%
\vskip\abovecaptionskip
\sbox\@tempboxa{#1: #2}%
\ifdim \wd\@tempboxa >\hsize
#1: #2\par
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip}
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
\newcommand\@pnumwidth{1.55em}
\newcommand\@tocrmarg{2.55em}
\newcommand\@dotsep{4.5}
\setcounter{tocdepth}{3}
\newcommand\tableofcontents{%
\section*{\contentsname
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
\@starttoc{toc}%
}
\newcommand*\l@part[2]{%
\ifnum \c@tocdepth >-2\relax
\addpenalty\@secpenalty
\addvspace{2.25em \@plus\p@}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
{\leavevmode
\large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
\nobreak
\if@compatibility
\global\@nobreaktrue
\everypar{\global\@nobreakfalse\everypar{}}%
\fi
\endgroup
\fi}
\newcommand*\l@section[2]{%
\ifnum \c@tocdepth >\z@
\addpenalty\@secpenalty
\addvspace{1.0em \@plus\p@}%
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\leavevmode \bfseries
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
\endgroup
\fi}
\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
\newcommand\listoffigures{%
\section*{\listfigurename
\@mkboth{\MakeUppercase\listfigurename}%
{\MakeUppercase\listfigurename}}%
\@starttoc{lof}%
}
\newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
\newcommand\listoftables{%
\section*{\listtablename
\@mkboth{%
\MakeUppercase\listtablename}{\MakeUppercase\listtablename}}%
\@starttoc{lot}%
}
\let\l@table\l@figure
\newdimen\bibindent
\setlength\bibindent{1.5em}
\newenvironment{thebibliography}[1]
{\section*{\refname
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}}%
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\@openbib@code
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
\sloppy
\clubpenalty4000
\@clubpenalty \clubpenalty
\widowpenalty4000%
\sfcode`\.\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist}
\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
\let\@openbib@code\@empty
\newenvironment{theindex}
{\if@twocolumn
\@restonecolfalse
\else
\@restonecoltrue
\fi
\columnseprule \z@
\columnsep 35\p@
\twocolumn[\section*{\indexname}]%
\@mkboth{\MakeUppercase\indexname}%
{\MakeUppercase\indexname}%
\thispagestyle{plain}\parindent\z@
\parskip\z@ \@plus .3\p@\relax
\let\item\@idxitem}
{\if@restonecol\onecolumn\else\clearpage\fi}
\newcommand\@idxitem{\par\hangindent 40\p@}
\newcommand\subitem{\@idxitem \hspace*{20\p@}}
\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
\renewcommand\footnoterule{%
\kern-3\p@
\hrule\@width.4\columnwidth
\kern2.6\p@}
\newcommand\@makefntext[1]{%
\parindent 1em%
\noindent
\hb@[email protected]{\hss\@makefnmark}#1}
\newcommand\contentsname{Contents}
\newcommand\listfigurename{List of Figures}
\newcommand\listtablename{List of Tables}
\newcommand\refname{REFERENCES}
\newcommand\indexname{Index}
\newcommand\figurename{Figure}
\newcommand\tablename{Table}
\newcommand\partname{Part}
\newcommand\appendixname{APPENDIX}
\newcommand\abstractname{ABSTRACT}
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
\setlength\columnsep{10\p@}
\setlength\columnseprule{0\p@}
\pagestyle{plain}
\pagenumbering{arabic}
\if@twoside
\else
\raggedbottom
\fi
\if@twocolumn
\twocolumn
\sloppy
\flushbottom
\else
\onecolumn
\fi
\endinput
%%
%% End of file `article.cls'.
Ich hoffe, dies hilft Ihnen beim Schreiben Ihrer Arbeit. Viel Glück bei Ihrer Arbeit.