Ich versuche, den Code anzuwenden in Farbverlauf in einer Zelle einer Tabelle
Wenn ich allerdings die Tabelle mit auf die nächste Seite setzen möchte \newpage, bleiben die Farben zurück, während sich die Tabelle verschiebt.
Siehe dieses Bild:
Wie kann ich erreichen, dass sich die Farben bei Verwendung zusammen mit der Tabelle bewegen \newpage?
Angepasster Code
Dies ist der Code, nachdem ich hinzugefügt habe\newpage
\documentclass[10pt]{article}
\usepackage[margin=2cm]{geometry} % just for the example
\usepackage[frenchb]{babel}
\usepackage[table]{xcolor}
\usepackage{array}
\usepackage{tikz}
\usepackage{lipsum}
\usetikzlibrary{calc,shadings}
% Andrew Stacey's code from
% https://tex.stackexchange.com/a/50054/3954
\makeatletter
\tikzset{%
remember picture with id/.style={%
remember picture,
overlay,
save picture id=#1,
},
save picture id/.code={%
\edef\pgf@temp{#1}%
\immediate\write\pgfutil@auxout{%
\noexpand\savepointas{\pgf@temp}{\pgfpictureid}}%
},
if picture id/.code args={#1#2#3}{%
\@ifundefined{save@pt@#1}{%
\pgfkeysalso{#3}%
}{
\pgfkeysalso{#2}%
}
}
}
\def\savepointas#1#2{%
\expandafter\gdef\csname save@pt@#1\endcsname{#2}%
}
\def\tmk@labeldef#1,#2\@nil{%
\def\tmk@label{#1}%
\def\tmk@def{#2}%
}
\tikzdeclarecoordinatesystem{pic}{%
\pgfutil@in@,{#1}%
\ifpgfutil@in@%
\tmk@labeldef#1\@nil
\else
\tmk@labeldef#1,(0pt,0pt)\@nil
\fi
\@ifundefined{save@pt@\tmk@label}{%
\tikz@scan@one@point\pgfutil@firstofone\tmk@def
}{%
\pgfsys@getposition{\csname save@pt@\tmk@label\endcsname}\save@orig@pic%
\pgfsys@getposition{\pgfpictureid}\save@this@pic%
\pgf@process{\pgfpointorigin\save@this@pic}%
\pgf@xa=\pgf@x
\pgf@ya=\pgf@y
\pgf@process{\pgfpointorigin\save@orig@pic}%
\advance\pgf@x by -\pgf@xa
\advance\pgf@y by -\pgf@ya
}%
}
\newcommand\tikzmark[2][]{%
\tikz[remember picture with id=#2] {#1;}}
\makeatother
% end of Andrew's code
\newcommand\ShadeCell[4][0pt]{%
\begin{tikzpicture}[overlay,remember picture]%
\shade[#4] ( $ (pic cs:#2) + (0pt,2ex) $ ) rectangle ( $ (pic cs:#3) + (0pt,-#1*\baselineskip-.8ex) $ );
\end{tikzpicture}%
}%
\begin{document}
\ShadeCell[14]{start1}{end1}{%
shading=color wheel white center,opacity=.15}
\ShadeCell{start2}{end2}{%
left color=red!20,right color=green!20}
\ShadeCell[13]{start3}{end3}{%
top color=green!20,bottom color=red!20}
\ShadeCell{start4}{end4}{%
left color=blue!20,right color=green!20}
\newpage
\begin{tabular}{| l | p{6cm} | c |}
\hline
Uncolored cell
& \multicolumn{1}{!{\tikzmark{start1}} p{6cm} !{\vrule\tikzmark{end1}}}{\lipsum*[2]}
& Uncolored cell \\
\hline
\multicolumn{1}{!{\vrule\tikzmark{start2}} l !{\vrule\tikzmark{end2}}}{Another colored cell}
& Another uncolored cell & Another uncolored cell \\
\hline
Uncolored cell
& \lipsum[4]
& \multicolumn{1}{!{\tikzmark{start3}} c !{\vrule\tikzmark{end3}}}{Another colored cell} \\
\hline
\multicolumn{2}{!{\vrule\tikzmark{start4}} c !{\vrule\tikzmark{end4}}}{Another merged colored cell}
& Uncolored cell \\
\hline
\end{tabular}
\end{document}
Originalcode und Originalbild(ausFarbverlauf in einer Zelle einer Tabelle)
\documentclass[10pt]{article}
\usepackage[margin=2cm]{geometry} % just for the example
\usepackage[frenchb]{babel}
\usepackage[table]{xcolor}
\usepackage{array}
\usepackage{tikz}
\usepackage{lipsum}
\usetikzlibrary{calc,shadings}
% Andrew Stacey's code from
% https://tex.stackexchange.com/a/50054/3954
\makeatletter
\tikzset{%
remember picture with id/.style={%
remember picture,
overlay,
save picture id=#1,
},
save picture id/.code={%
\edef\pgf@temp{#1}%
\immediate\write\pgfutil@auxout{%
\noexpand\savepointas{\pgf@temp}{\pgfpictureid}}%
},
if picture id/.code args={#1#2#3}{%
\@ifundefined{save@pt@#1}{%
\pgfkeysalso{#3}%
}{
\pgfkeysalso{#2}%
}
}
}
\def\savepointas#1#2{%
\expandafter\gdef\csname save@pt@#1\endcsname{#2}%
}
\def\tmk@labeldef#1,#2\@nil{%
\def\tmk@label{#1}%
\def\tmk@def{#2}%
}
\tikzdeclarecoordinatesystem{pic}{%
\pgfutil@in@,{#1}%
\ifpgfutil@in@%
\tmk@labeldef#1\@nil
\else
\tmk@labeldef#1,(0pt,0pt)\@nil
\fi
\@ifundefined{save@pt@\tmk@label}{%
\tikz@scan@one@point\pgfutil@firstofone\tmk@def
}{%
\pgfsys@getposition{\csname save@pt@\tmk@label\endcsname}\save@orig@pic%
\pgfsys@getposition{\pgfpictureid}\save@this@pic%
\pgf@process{\pgfpointorigin\save@this@pic}%
\pgf@xa=\pgf@x
\pgf@ya=\pgf@y
\pgf@process{\pgfpointorigin\save@orig@pic}%
\advance\pgf@x by -\pgf@xa
\advance\pgf@y by -\pgf@ya
}%
}
\newcommand\tikzmark[2][]{%
\tikz[remember picture with id=#2] {#1;}}
\makeatother
% end of Andrew's code
\newcommand\ShadeCell[4][0pt]{%
\begin{tikzpicture}[overlay,remember picture]%
\shade[#4] ( $ (pic cs:#2) + (0pt,2ex) $ ) rectangle ( $ (pic cs:#3) + (0pt,-#1*\baselineskip-.8ex) $ );
\end{tikzpicture}%
}%
\begin{document}
\ShadeCell[14]{start1}{end1}{%
shading=color wheel white center,opacity=.15}
\ShadeCell{start2}{end2}{%
left color=red!20,right color=green!20}
\ShadeCell[13]{start3}{end3}{%
top color=green!20,bottom color=red!20}
\ShadeCell{start4}{end4}{%
left color=blue!20,right color=green!20}
\begin{tabular}{| l | p{6cm} | c |}
\hline
Uncolored cell
& \multicolumn{1}{!{\tikzmark{start1}} p{6cm} !{\vrule\tikzmark{end1}}}{\lipsum*[2]}
& Uncolored cell \\
\hline
\multicolumn{1}{!{\vrule\tikzmark{start2}} l !{\vrule\tikzmark{end2}}}{Another colored cell}
& Another uncolored cell & Another uncolored cell \\
\hline
Uncolored cell
& \lipsum[4]
& \multicolumn{1}{!{\tikzmark{start3}} c !{\vrule\tikzmark{end3}}}{Another colored cell} \\
\hline
\multicolumn{2}{!{\vrule\tikzmark{start4}} c !{\vrule\tikzmark{end4}}}{Another merged colored cell}
& Uncolored cell \\
\hline
\end{tabular}
\end{document}
Antwort1
Sie haben einen Seitenumbruch zwischen den Farben und der Tabelle erzwungen. Setzen Sie ihn einfach \newpagevor die Farben und nicht danach.