Ich habe festgestellt, dass mein Knotendiagramm eine seiner Kreuzungen ändert, wenn es anders skaliert wird. Die Kreuzungen sollten in derzweiteDiagramm, das durch den untenstehenden Code generiert wurde. Ich weiß nicht, wie das passiert ist. Ich habe versucht, es zu verwenden, draft mode=crossingsaber es hat nichts genützt. Könnte mir bitte jemand helfen, die Kreuzungen im ersten Diagramm auf die richtige Version umzustellen?
Dies ist mein Code:
\documentclass[a4paper,11pt]{report}
\usepackage{graphicx,amssymb,amstext,amsmath}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,decorations.markings,hobby,knots,celtic,shapes.geometric,calc}
\begin{document}
\tikzset{
knot diagram/every strand/.append style={
line width=1.5pt,violet
},
}
\tikzset{
my style/.style={
dashed
}
}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[my style, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[my style, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
%---------------------------------------------------------------
\begin{tikzpicture}[scale=2, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[my style, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[my style, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
\end{document}
Antwort1
Das zugrunde liegende Problem ist das gleiche wie inUnerwartetes Verhalten der Tikz-Bibliothek „Knoten“, wenn eine Kreuzung nahe an einer anderen (dicken) Linie liegt: Was ist los?. Es gibt zwei Kreuzungen, die sehr nahe beieinander liegen und deren Beschneidungskreise (wenn die Kreuzungen gezeichnet werden) sich überlappen, was bedeutet, dass, wenn die violette Linie über die gestrichelte graue Linie gezeichnet wird, sie sich an dieser problematischen Kreuzung auch selbst überzeichnet.
Hier sind einige mögliche Korrekturen. Bei der ersten reduziere ich den Radius der Schnittkreise. Bei der zweiten habe ich die gestrichelte graue Linie aus dem Knoten entfernt, da sie nicht wirklich Teil des Knotens zu sein scheint (beachten Sie, dass Sie den Schlüssel für das only when renderingTeil verwenden sollten, wenn Sie sie im Knoten behalten möchten dashed– Einzelheiten finden Sie in der Dokumentation). Bei der dritten Korrektur habe ich Ihren Hobbypfad ein wenig vereinfacht.
Ergebnisse:
Code:
\documentclass[a4paper,11pt]{report}
%\url{https://tex.stackexchange.com/q/478294/86}
\usepackage{shellesc}
\usepackage{graphicx,amssymb,amstext,amsmath}
\usepackage{tikz}
\usetikzlibrary{
decorations.pathreplacing,
decorations.markings,
hobby,
knots,
celtic,
shapes.geometric,
calc,
external
}
\tikzexternalize
\begin{document}
\tikzset{
knot diagram/every strand/.append style={
line width=1.5pt,violet
},
}
\tikzset{
my style/.style={
dashed
}
}
Demonstration of the problem: the clipping circles are big enough that the circle associated with the crossing between the violet line and the dashed grey line overlaps the problematic crossing.
\tikzsetnextfilename{problem}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
background clip/.append style={
preaction={
fill=gray,
fill opacity=.5,
}
},
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
%---------------------------------------------------------------
Fix one: shrink the clipping circles using the \verb+clip radius+ key.
\tikzsetnextfilename{fix-one}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
clip radius=3pt,
background clip/.append style={
preaction={
fill=gray,
fill opacity=.5,
}
},
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
Fix two: the dashed grey lines don't appear to actually be anything to do with the knot, so draw them separately.
This means that there aren't two crossings near to each other any more.
\tikzsetnextfilename{fix-two}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\draw[
line width=1.5pt,
my style,
lightgray,
rotate=180
] (-0.7,-1.2) -- (-0.7,2.5);
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
% flip crossing=6,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
Fix three: you specify a lot of \emph{nodes} in your Hobby path.
If you aren't wedded to that specific path then reducing the number of nodes can simplify the knot algorithm.
\tikzsetnextfilename{fix-three}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.2 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.28 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.8 with {\arrow[line width=1.5pt]{<}}}}]
\draw[
line width=1.5pt,
my style,
lightgray,
rotate=180
] (-0.7,-2.2) -- (-0.7,3.5);
\begin{knot}[
consider self intersections=true,
end tolerance=3pt,
flip crossing=4,
rotate=180]
\strand ([closed].5,2) [add arrow,violet] .. (-.5,1) .. (.3,-.5) .. (-.3,-.5) .. (.5,1) .. ([tension=3]-1.5,1) .. (.7,-1) .. (-2,1);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
\tikzsetnextfilename{large-scale}
\begin{tikzpicture}[scale=2, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[knot diagram/only when rendering/.style={my style}, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
\end{document}
Antwort2
Ich habe genau das gemacht, was Sie vorgeschlagen haben, draft mode=crossingsund dann habe ich die Kreuzung Nummer 6 umgedreht und bekomme
\documentclass[a4paper,11pt]{report}
\usepackage{graphicx,amssymb,amstext,amsmath}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,decorations.markings,hobby,knots,celtic,shapes.geometric,calc}
\begin{document}
\tikzset{
knot diagram/every strand/.append style={
line width=1.5pt,violet
},
}
\tikzset{
my style/.style={
dashed
}
}
\begin{tikzpicture}[scale=0.9, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[my style, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[my style, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
%---------------------------------------------------------------
\begin{tikzpicture}[scale=2, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[%draft mode=crossings,
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing/.list={3,6},
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[my style, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[my style, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}
\end{document}
OK, ich kann das Problem nicht lösen. Hier ist ein Vorschlag für einen Workaround.
\documentclass[a4paper,11pt]{report}
\usepackage{graphicx,amssymb,amstext,amsmath}
\usepackage{tikz}
\usetikzlibrary{decorations.pathreplacing,decorations.markings,hobby,knots,celtic,shapes.geometric,calc}
\begin{document}
\tikzset{
knot diagram/every strand/.append style={
line width=3.2pt,violet
},
}
\tikzset{
my style/.style={
dashed
}
}
\scalebox{0.45}{
\begin{tikzpicture}[scale=2, use Hobby shortcut, add arrow/.style={postaction={decorate}, decoration={
markings,
mark=at position 0.25 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.653 with {\arrow[line width=1.5pt]{<}},
mark=at position 0.75 with {\arrow[line width=1.5pt]{<}}}}]
\begin{knot}[%draft mode=crossings,
consider self intersections=true,
ignore endpoint intersections=false,
flip crossing=3,
rotate=180]
\strand ([closed]0,0) .. (0.7,-0.7) .. (0,-1) .. (-1.7,0) .. (-1.5,2.2) .. (0,2.5) .. (.5,2) .. (-.5,1) [add arrow,violet] .. (.5,0) .. (0,-.5) .. (-.5,0) .. (.5,1) .. (-.5,2) .. (-1.5,1) .. (0,0);
\strand[my style, lightgray] (-0.7,-1.2) -- (-0.7,-.9);
\strand[my style, lightgray] (-0.7,-.75) -- (-0.7,2.5);
\end{knot}
\path (0,-.7);
\end{tikzpicture}}
\end{document}
