☰

TikZ: So zeichnen Sie ein Muster am Rand eines nicht geschlossenen TikZ-Pfades

tag-icon • tag-icon tikz-pgf decorations pattern
TikZ: So zeichnen Sie ein Muster am Rand eines nicht geschlossenen TikZ-Pfades

„Basierend auf der Lösung vonTikZ: So zeichnen Sie ein Muster am Rand eines TikZ-PfadesIch konnte alle Grafiken meiner Abschlussarbeit bis auf eine Form selbst erstellen. Wie man in der Grafik sehen kann" ( ;-)Füllregel und Muster am Rand)

Bildbeschreibung hier eingeben

Ich möchte einen offenen Pfad zeichnen, bei dem Anfang und Ende nicht verbunden sind, wie in Fall c), nur dass ich ihn mit einem Muster verzieren möchte, wie in Fall a) und b). Momentan versuche ich mir zu helfen, indem ich einen Teil des Pfades mit einem weißen Rechteck verstecke. Das Problem ist, dass ich das Muster nur auf geschlossene Pfade anwenden kann. Sobald ich das cycleam Ende eines Pfades entferne, der den Stil hat EDR, EDOerhalte ich den Fehler:Package tikz Error: Cannot parse this coordinate.

Wie kann ich einen offenen Pfad mit einem Muster verzieren? Wie in dieser Abbildung gezeigt (modifiziert mit Inkscape).

Bildbeschreibung hier eingeben

Das MWE:

\documentclass[tikz]{standalone}
\usepackage{tikz}
\usetikzlibrary{patterns}
\usetikzlibrary{decorations,backgrounds}

% BEGIN from https://tex.stackexchange.com/a/419558/11820
\newcounter{tmp}

%\tikzstyle{D}=[draw=blue,line width=1pt,preaction={clip, postaction={draw=blue,opacity=0.5,line width=12pt}}]
%<- note that tikzstyle is deprecated

\tikzset{D/.style={
    preaction={draw=blue,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \begin{scope}[opacity=0.5, transparency group]
            \path[fill=blue,even odd rule] 
            \mySecondList \myList 
            ;
          \end{scope}
        \endpgfinterruptpath}
    }},
}}



\tikzset{EDR/.style={
    preaction={draw=red,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north west lines, pattern color=red,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}

\makeatletter
\def\pgfdecoratedcontourdistance{0pt}
\pgfset{
  decoration/contour distance/.code=%
\pgfmathsetlengthmacro\pgfdecoratedcontourdistance{#1}}
\pgfdeclaredecoration{contour lineto closed}{start}{%
  \state{start}[
  next state=draw,
  width=0pt,
  persistent precomputation=\let\pgf@decorate@firstsegmentangle\pgfdecoratedangle]{%
    \pgfextra{\xdef\myList{}\xdef\mySecondList{}}
    \pgfextra{\setcounter{tmp}{0}}
    \pgfpathmoveto{\pgfpointlineattime{.5}
      {\pgfqpoint{0pt}{\pgfdecoratedcontourdistance}}
    {\pgfqpoint{\pgfdecoratedinputsegmentlength}{\pgfdecoratedcontourdistance}}}%
  }%
  \state{draw}[next state=draw, width=\pgfdecoratedinputsegmentlength]{%
    \ifpgf@decorate@is@closepath@%
      \pgfmathsetmacro\pgfdecoratedangletonextinputsegment{%
      -\pgfdecoratedangle+\pgf@decorate@firstsegmentangle}%
    \fi
    \pgfmathsetlengthmacro\pgf@decoration@contour@shorten{%
    -\pgfdecoratedcontourdistance*cot(-\pgfdecoratedangletonextinputsegment/2+90)}%
    \pgfpathlineto
    {\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \stepcounter{tmp}
    \pgfcoordinate{muemmel\thetmp}{\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}
    \pgfcoordinate{feep\thetmp}{\pgfpoint{\pgfdecoratedinputsegmentlength}{0pt}}      
    \pgfextra{\xdef\myList{\myList (muemmel\thetmp) -- }%
    \xdef\mySecondList{\mySecondList (feep\thetmp) -- }}
    \ifpgf@decorate@is@closepath@%
      \pgfpathclose
      \pgfextra{\xdef\myList{\myList cycle}% 
      \xdef\mySecondList{\mySecondList cycle}}
    \fi
  }%
  \state{final}{\pgfextra{%\typeout{\myList,\mySecondList}
  }}%
}
\makeatother
\tikzset{
  contour/.style={
    decoration={
      name=contour lineto closed,
      contour distance=#1
    },
decorate}}
% END from https://tex.stackexchange.com/a/419558/11820

\tikzset{EDO/.style={
    preaction={draw=orange,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north east lines, pattern color=orange,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}
\begin{document}

\begin{tikzpicture}[]
  \node at (-.5,0) {a)};
  \path [EDO] (2.875,0) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75) -- cycle;
  \path [EDR] (0,0) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0) -- cycle ;
  \fill [white] (.21,.3) rectangle (2.655,-.3);

  \begin{scope}[yshift=-2cm]
  \node at (-.5,0) {b)};
    \path [EDO] (2.875,0) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75) -- cycle;
    \path [EDR] (0,0) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0) -- cycle ;
  \end{scope}

  \begin{scope}[yshift=-4cm]
    \node at (-.5,0) {c)};
    \path [draw, orange, line width=1pt] (2.875,0) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75);
    \path [draw, red, line width=1pt] (0,0) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0);
  \end{scope}
\end{tikzpicture}

\end{document}

Antwort1

Dies ist eine Verallgemeinerung Ihres Codes, die genau das tut. Er unterscheidet zwischen geschlossenen und nicht geschlossenen Pfaden.

\documentclass[tikz]{standalone}
\usepackage{tikz}
\usetikzlibrary{patterns}
\usetikzlibrary{decorations,backgrounds}

% BEGIN from https://tex.stackexchange.com/a/419558/11820
\newcounter{tmp}
\newif\ifpathisclosed

%\tikzstyle{D}=[draw=blue,line width=1pt,preaction={clip, postaction={draw=blue,opacity=0.5,line width=12pt}}]
%<- note that tikzstyle is deprecated

\tikzset{D/.style={
    preaction={draw=blue,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \begin{scope}[opacity=0.5, transparency group]
            \path[fill=blue,even odd rule] 
            \mySecondList \myList 
            ;
          \end{scope}
        \endpgfinterruptpath}
    }},
}}



\tikzset{EDR/.style={
    preaction={draw=red,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north west lines, pattern color=red,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}

\makeatletter
\def\pgfdecoratedcontourdistance{0pt}
\pgfset{
  decoration/contour distance/.code=%
\pgfmathsetlengthmacro\pgfdecoratedcontourdistance{#1}}
\pgfdeclaredecoration{contour lineto closed}{start}{%
  \state{start}[
  next state=draw,
  width=0pt,
  persistent precomputation=\let\pgf@decorate@firstsegmentangle\pgfdecoratedangle]{%
    %\xdef\myList{}\xdef\mySecondList{}%
    \setcounter{tmp}{0}%
    \global\pathisclosedfalse%
    \pgfpathmoveto{\pgfpointlineattime{.5}
      {\pgfqpoint{0pt}{\pgfdecoratedcontourdistance}}
    {\pgfqpoint{\pgfdecoratedinputsegmentlength}{\pgfdecoratedcontourdistance}}}%
  }%
  \state{draw}[next state=draw, width=\pgfdecoratedinputsegmentlength]{%
    \ifpgf@decorate@is@closepath@%
      \pgfmathsetmacro\pgfdecoratedangletonextinputsegment{%
      -\pgfdecoratedangle+\pgf@decorate@firstsegmentangle}%
    \fi
    \pgfmathsetlengthmacro\pgf@decoration@contour@shorten{%
    -\pgfdecoratedcontourdistance*cot(-\pgfdecoratedangletonextinputsegment/2+90)}%
    \pgfpathlineto
    {\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \stepcounter{tmp}%
    \pgfcoordinate{muemmel\number\value{tmp}}{\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \pgfcoordinate{feep\number\value{tmp}}{\pgfpoint{\pgfdecoratedinputsegmentlength}{0pt}}%      
    \ifnum\value{tmp}=1\relax%
     \pgfcoordinate{muemmel0}{\pgfpoint{0pt}{\pgfdecoratedcontourdistance}}%
     \pgfcoordinate{feep0}{\pgfpoint{0pt}{0pt}}%      
     \xdef\myList{(muemmel\number\value{tmp})}%
     \xdef\mySecondList{(feep\number\value{tmp})}%
    \else
     \xdef\myList{\myList -- (muemmel\number\value{tmp})}%
     \xdef\mySecondList{(feep\number\value{tmp}) -- \mySecondList}%
    \fi 
    \ifpgf@decorate@is@closepath@%
      \pgfpathclose
      \global\pathisclosedtrue%
    \fi
  }%
  \state{final}{%\typeout{\myList,\mySecondList}%
    \ifpathisclosed%
      \xdef\myList{\myList -- cycle}% 
      \xdef\mySecondList{\mySecondList -- cycle}%
      %\typeout{closed \mySecondList \myList }
    \else
      %\typeout{\number\value{tmp}}%
      \xdef\myList{(muemmel0) -- \myList -- cycle}% 
      \xdef\mySecondList{\mySecondList -- (feep0) --}%
      %\typeout{not closed \mySecondList \myList }%   
    \fi
  }%
}
\makeatother
\tikzset{
  contour/.style={
    decoration={
      name=contour lineto closed,
      contour distance=#1
    },
decorate}}
% END from https://tex.stackexchange.com/a/419558/11820

\tikzset{EDO/.style={
    preaction={draw=orange,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north east lines, pattern color=orange,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}
\begin{document}

\begin{tikzpicture}[]
  \path [EDO] (2.875,3) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75) -- cycle;
  \path [EDR] (0,3) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0) -- cycle ;
  \fill [white] (.21,3.3) rectangle (2.655,2.7);

  \begin{scope}[yshift=-2cm]
    \path [EDO] (2.875,3) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75) -- cycle;
    \path [EDR] (0,3) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0) -- cycle ;
  \end{scope}

  \begin{scope}[yshift=-4cm]
    \path [EDO,draw, orange, line width=1pt] (2.875,3) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75);
    \path [EDR,draw, red, line width=1pt] (0,3) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0);
  \end{scope}

  \begin{scope}[yshift=-6cm]
    \path [EDO,draw, orange, line width=1pt] (2.875,3) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75);
    \path [EDR,draw, red, line width=1pt,shorten >=6pt] (0,3) -- ++(0,-1) -- ++(6,0) -- ++(0,1) 
    -- ++(-3.125cm-6pt,0);
  \end{scope}
\end{tikzpicture}

\end{document}

Bildbeschreibung hier eingeben

Von oben gezählt ist der dritte (oder vorletzte) Pfad standardmäßig das, was Sie erhalten. Dies liegt daran, dass der Pfad nicht weiß, was der andere Pfad ist. Um die gewünschte Ausgabe zu erzeugen, müssen Sie verwenden shorten, siehe viertes (oder letztes) Bild.

Dies ist eine optimierte Version davon.

\documentclass[tikz,border=3mm]{standalone}
\usetikzlibrary{patterns,decorations}

% BEGIN from https://tex.stackexchange.com/a/419558/11820


\tikzset{D/.style={
    preaction={draw=blue,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \begin{scope}[opacity=0.5, transparency group]
            \path[fill=blue,even odd rule] 
            \mySecondList \myList 
            ;
          \end{scope}
        \endpgfinterruptpath}
    }},
}}



\tikzset{EDR/.style={
    preaction={draw=red,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north west lines, pattern color=red,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}

\makeatletter
\newif\ifdeco@path@is@closed
\newcounter{deco@count}

\def\pgfdecoratedcontourdistance{0pt}
\pgfset{
  decoration/contour distance/.code=%
\pgfmathsetlengthmacro\pgfdecoratedcontourdistance{#1}}
\pgfdeclaredecoration{contour lineto closed}{start}{%
  \state{start}[
  next state=draw,
  width=0pt,
  persistent precomputation=\let\pgf@decorate@firstsegmentangle\pgfdecoratedangle]{%
    %\xdef\myList{}\xdef\mySecondList{}%
    \setcounter{deco@count}{0}%
    \global\deco@path@is@closedfalse%
    \pgfpathmoveto{\pgfpointlineattime{.5}
      {\pgfqpoint{0pt}{\pgfdecoratedcontourdistance}}
    {\pgfqpoint{\pgfdecoratedinputsegmentlength}{\pgfdecoratedcontourdistance}}}%
  }%
  \state{draw}[next state=draw, width=\pgfdecoratedinputsegmentlength]{%
    \ifpgf@decorate@is@closepath@%
      \pgfmathsetmacro\pgfdecoratedangletonextinputsegment{%
      -\pgfdecoratedangle+\pgf@decorate@firstsegmentangle}%
    \fi
    \pgfmathsetlengthmacro\pgf@decoration@contour@shorten{%
    -\pgfdecoratedcontourdistance*cot(-\pgfdecoratedangletonextinputsegment/2+90)}%
    \pgfpathlineto
    {\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \stepcounter{deco@count}%
    \pgfcoordinate{muemmel\number\value{deco@count}}{\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \pgfcoordinate{feep\number\value{deco@count}}{\pgfpoint{\pgfdecoratedinputsegmentlength}{0pt}}%      
    \ifnum\value{deco@count}=1\relax%
     \pgfcoordinate{muemmel0}{\pgfpoint{0pt}{\pgfdecoratedcontourdistance}}%
     \pgfcoordinate{feep0}{\pgfpoint{0pt}{0pt}}%      
     \xdef\myList{(muemmel\number\value{deco@count})}%
     \xdef\mySecondList{(feep\number\value{deco@count})}%
    \else
     \xdef\myList{\myList -- (muemmel\number\value{deco@count})}%
     \xdef\mySecondList{(feep\number\value{deco@count}) -- \mySecondList}%
    \fi 
    \ifpgf@decorate@is@closepath@%
      \pgfpathclose
      \global\deco@path@is@closedtrue%
    \fi
  }%
  \state{final}{%\typeout{\myList,\mySecondList}%
    \ifdeco@path@is@closed%
      \xdef\myList{\myList -- cycle}% 
      \xdef\mySecondList{\mySecondList -- cycle}%
      %\typeout{closed \mySecondList \myList }
    \else
      %\typeout{\number\value{deco@count}}%
      \xdef\myList{(muemmel0) -- \myList -- cycle}% 
      \xdef\mySecondList{\mySecondList -- (feep0) --}%
      %\typeout{not closed \mySecondList \myList }%   
    \fi
  }%
}
\makeatother
\tikzset{
  contour/.style={
    decoration={
      name=contour lineto closed,
      contour distance=#1
    },
decorate}}
% END from https://tex.stackexchange.com/a/419558/11820

\tikzset{EDO/.style={
    preaction={draw=orange,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north east lines, pattern color=orange,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}
\begin{document}

\begin{tikzpicture}[]
    \path [EDO,draw, orange, line width=1pt] (2.875,3) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75);
    \path [EDR,draw, red, line width=1pt,shorten >=6pt-\pgflinewidth/2] (0,3) -- ++(0,-1) -- ++(6,0) -- ++(0,1) 
    -- ++(-3.125cm-6pt,0);
\end{tikzpicture}

\end{document}

Bildbeschreibung hier eingeben

Ich habe ein bisschen aufgeräumt. Eines habe ich jedoch nicht getan: die Verwendung von \pgfextrafür Pfade einzustellen. Das ist etwas, das vermieden werden muss. In diesem Fall scheint es in Ordnung zu sein. Man könnte auch eine sauberere Version schreiben, aber dazu müsste man einen zusätzlichen Befehl für das Muster hinzufügen. Bitte lassen Sie mich wissen, ob Sie dies ausführlicher haben möchten.

Antwort2

Eine Möglichkeit hierzu besteht darin, den drawTeil von der Dekoration zu entfernen und dann die Linien zu zeichnen, nachdem die Dekoration fertig ist, wie in Ihrem dritten Beispiel.

Ich habe Ihr MWE geändert:

\documentclass[tikz]{standalone}
\usepackage{tikz}
\usetikzlibrary{patterns}
\usetikzlibrary{decorations,backgrounds}

% BEGIN from https://tex.stackexchange.com/a/419558/11820
\newcounter{tmp}

%\tikzstyle{D}=[draw=blue,line width=1pt,preaction={clip, postaction={draw=blue,opacity=0.5,line width=12pt}}]
%<- note that tikzstyle is deprecated

\tikzset{D/.style={
    preaction={draw=blue,line width=1pt},
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \begin{scope}[opacity=0.5, transparency group]
            \path[fill=blue,even odd rule] 
            \mySecondList \myList 
            ;
          \end{scope}
        \endpgfinterruptpath}
    }},
}}



\tikzset{EDR/.style={
   % preaction={draw=red,line width=1pt},    %<- remove this line
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north west lines, pattern color=red,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}

\makeatletter
\def\pgfdecoratedcontourdistance{0pt}
\pgfset{
  decoration/contour distance/.code=%
\pgfmathsetlengthmacro\pgfdecoratedcontourdistance{#1}}
\pgfdeclaredecoration{contour lineto closed}{start}{%
  \state{start}[
  next state=draw,
  width=0pt,
  persistent precomputation=\let\pgf@decorate@firstsegmentangle\pgfdecoratedangle]{%
    \pgfextra{\xdef\myList{}\xdef\mySecondList{}}
    \pgfextra{\setcounter{tmp}{0}}
    \pgfpathmoveto{\pgfpointlineattime{.5}
      {\pgfqpoint{0pt}{\pgfdecoratedcontourdistance}}
    {\pgfqpoint{\pgfdecoratedinputsegmentlength}{\pgfdecoratedcontourdistance}}}%
  }%
  \state{draw}[next state=draw, width=\pgfdecoratedinputsegmentlength]{%
    \ifpgf@decorate@is@closepath@%
      \pgfmathsetmacro\pgfdecoratedangletonextinputsegment{%
      -\pgfdecoratedangle+\pgf@decorate@firstsegmentangle}%
    \fi
    \pgfmathsetlengthmacro\pgf@decoration@contour@shorten{%
    -\pgfdecoratedcontourdistance*cot(-\pgfdecoratedangletonextinputsegment/2+90)}%
    \pgfpathlineto
    {\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}%
    \stepcounter{tmp}
    \pgfcoordinate{muemmel\thetmp}{\pgfpoint{\pgfdecoratedinputsegmentlength+\pgf@decoration@contour@shorten}
    {\pgfdecoratedcontourdistance}}
    \pgfcoordinate{feep\thetmp}{\pgfpoint{\pgfdecoratedinputsegmentlength}{0pt}}      
    \pgfextra{\xdef\myList{\myList (muemmel\thetmp) -- }%
    \xdef\mySecondList{\mySecondList (feep\thetmp) -- }}
    \ifpgf@decorate@is@closepath@%
      \pgfpathclose
      \pgfextra{\xdef\myList{\myList cycle}% 
      \xdef\mySecondList{\mySecondList cycle}}
    \fi
  }%
  \state{final}{\pgfextra{%\typeout{\myList,\mySecondList}
  }}%
}
\makeatother
\tikzset{
  contour/.style={
    decoration={
      name=contour lineto closed,
      contour distance=#1
    },
decorate}}
% END from https://tex.stackexchange.com/a/419558/11820

\tikzset{EDO/.style={
  %  preaction={draw=orange,line width=1pt},    %<- remove this line
    preaction={decoration={contour lineto closed, contour distance=6pt},
      decorate,
    },
    postaction={
      insert path={%
        \pgfextra{%
          \pgfinterruptpath
          \path[pattern=north east lines, pattern color=orange,even odd rule] 
          \mySecondList \myList 
          ;
        \endpgfinterruptpath}
    }},
}}
\begin{document}

\begin{tikzpicture}[]
  \node at (-.5,0) {a)};
  \path [EDO] (2.875,0) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75) -- cycle;
  \path [EDR] (0,0) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0) -- cycle ;
  \fill [white] (.21,.3) rectangle (2.655,-.3);
  \path [draw, orange, line width=1pt] (2.875,0) -- ++(0,.75) -- ++(-2.875,0) -- ++(0,-.75);
  \path [draw, red, line width=1pt] (0,0) -- ++(0,-1) -- ++(6,0) -- ++(0,1) -- ++(-3.125,0);
\end{tikzpicture}

\end{document}

Dies ergibt folgendes Bildbeschreibung hier eingeben

Antwort3

Ich stelle fest, dass der obige Code zwangsläufig lang und kompliziert ist, daher verwende ich einfaches TikZ. Die Bedeutung der Parameter ist klar und Sie können die Farbe nach Belieben ändern.

Die Fülloption even odd rulefür das north west linesMuster erledigt den Job.

Bildbeschreibung hier eingeben

\documentclass[tikz,border=5mm]{standalone}
\usetikzlibrary{patterns}
\begin{document}
\begin{tikzpicture}[thick,declare function={a=3;b=1.2;c=3.5;d=1;m=.2;}]
\path 
(0,0)   coordinate (A) +(m,m)   coordinate (At)
(a,b+d) coordinate (B) +(-m,-m) coordinate (Bt)
(a+c,b) coordinate (C) +(-m,-m) coordinate (Ct)
;
\draw[blue,pattern=north west lines,pattern color=red!50,even odd rule] 
(A)|-(B)|-(C)|-cycle (At)|-(Bt)|-(Ct)|-cycle;
\end{tikzpicture}
\end{document}

verwandte Informationen