Ich bin ziemlich neu bei IPtables. Ich versuche, den gesamten Datenverkehr, den ich auf einem bestimmten Port empfange, auf Port 80 umzuleiten, aber ich glaube, ich übersehe etwas.
Die Regel, die ich geschrieben habe, lautet:
iptables -t nat -A PREROUTING -i wlan0 -p tcp --dport 9339 -j REDIRECT --to-port 80
Meine Frage ist: Kann diese Regel funktionieren, wenn es eine Firewall gibt, die nur den Datenverkehr zu Port 80 zulässt? Wenn nicht, erklären Sie mir bitte, warum und wie ich das Problem beheben kann.
BEARBEITEN
Dies ist die Ausgabe des Befehls iptables -L -n:
==========
IPv4 Rules
==========
Chain INPUT (policy ACCEPT 16115 packets, 2293K bytes)
pkts bytes target prot opt in out source destination
391K 37M bw_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
391K 37M fw_INPUT all -- * * 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 oem_fwd all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 fw_FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 bw_FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0
0 0 natctrl_FORWARD all -- * * 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT 15471 packets, 1312K bytes)
pkts bytes target prot opt in out source destination
385K 31M oem_out all -- * * 0.0.0.0/0 0.0.0.0/0
385K 31M fw_OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0
385K 31M bw_OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0
385K 31M st_filter_OUTPUT all -- * * 0.0.0.0/0 0.0.0.0/0
Chain afwall (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g-fork (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g-home (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g-postcustom (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g-roam (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-3g-tether (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-reject (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-vpn (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi-fork (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi-lan (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi-postcustom (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi-tether (0 references)
pkts bytes target prot opt in out source destination
Chain afwall-wifi-wan (0 references)
pkts bytes target prot opt in out source destination
Chain bw_FORWARD (1 references)
pkts bytes target prot opt in out source destination
Chain bw_INPUT (1 references)
pkts bytes target prot opt in out source destination
389K 37M all -- * * 0.0.0.0/0 0.0.0.0/0 owner socket exists
Chain bw_OUTPUT (1 references)
pkts bytes target prot opt in out source destination
384K 31M all -- * * 0.0.0.0/0 0.0.0.0/0 owner socket exists
Chain bw_costly_shared (0 references)
pkts bytes target prot opt in out source destination
0 0 bw_penalty_box all -- * * 0.0.0.0/0 0.0.0.0/0
Chain bw_happy_box (0 references)
pkts bytes target prot opt in out source destination
Chain bw_penalty_box (1 references)
pkts bytes target prot opt in out source destination
Chain fw_FORWARD (1 references)
pkts bytes target prot opt in out source destination
Chain fw_INPUT (1 references)
pkts bytes target prot opt in out source destination
Chain fw_OUTPUT (1 references)
pkts bytes target prot opt in out source destination
Chain natctrl_FORWARD (1 references)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain natctrl_tether_counters (0 references)
pkts bytes target prot opt in out source destination
Chain oem_fwd (1 references)
pkts bytes target prot opt in out source destination
Chain oem_out (1 references)
pkts bytes target prot opt in out source destination
Chain st_filter_OUTPUT (1 references)
pkts bytes target prot opt in out source destination
==================
Network interfaces
==================
ip6tnl0 lo sit0 eth1 wlan0 teql0
========
ifconfig
========
ifconfig: /proc/net/dev: Operation not permitted
eth1 Link encap:Ethernet HWaddr 08:00:27:C4:FD:41
inet addr:172.17.100.15 Bcast:172.17.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
wlan0 Link encap:Ethernet HWaddr 08:00:27:E4:CD:99
inet addr:172.17.99.15 Bcast:172.17.99.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
===========
System info
===========
Android version: 4.4.2
Manufacturer: samsung
Model: N8010
Build: kanas3gzn-user 4.4.2 KOT49H 3.8.117.1102 release-keys
Active interface: wifi
Tether status: no
Roam status: no
IPv4 subnet: 172.17.100.15/24
IPv6 subnet: fe80::a00:27ff:fec4:fd41/64
/system/bin/su: 918212 bytes
/system/xbin/su: 918212 bytes
/data/magisk/magisk: not present
/system/app/Superuser.apk: not present
Superuser: none found
===========
Preferences
===========
activeNotification: false
activeRules: true
appVersion: 15980
controlIPv6: false
disableIcons: false
enableConfirm: false
enableIPv6: false
enableLAN: true
enableRoam: false
enableVPN: false
forward_chain: true
forward_chain_v6: true
hasRoot: true
input_chain: true
input_chain_v6: true
logDmesg: OS
notification_priority: 0
notifyAppInstall: true
output_chain: true
output_chain_v6: true
passSetting: p0
patternMax: 3
runNotification: true
showFilter: false
showLogToasts: false
showUid: false
sysColor: -10432
toast_pos: bottom
Profile Mode : whitelist
Status : Disabled
======
Logcat
======
17:56:57 Selected Profile: AFWallPrefs
17:56:57 Received cmds: #1
17:56:57 Starting root shell...
17:56:57 Selected Profile: AFWallPrefs
17:56:57 Root shell is open
17:56:57 Start processing next state
17:56:57 Total commamds: #1
17:57:01 Received cmds: #1
17:57:01 Start processing next state
17:57:01 Total commamds: #1
17:57:01 Received cmds: #1
17:57:01 Start processing next state
17:57:01 Total commamds: #1
17:57:02 Received cmds: #1
17:57:02 Start processing next state
17:57:02 Total commamds: #1
17:57:02 isWifiApEnabled is false
Dank im Voraus.