VPN PPTP-Server

VPN PPTP-Server

Ich erstelle einen VPN-PPTP-Server auf Basis dieses Standards und habe derzeit die folgenden Pakete:

Client -> Server:

Point-to-Point Tunnelling Protocol
Length: 156
Message type: Control Message (1)
Magic Cookie: 0x1a2b3c4d (correct)
Control Message Type: Start-Control-Connection-Request (1)
Reserved: 0000
Protocol version: 1.0
Reserved: 0000
Framing Capabilities: Either Framing supported (3)
Bearer Capabilities: Either access supported (3)
Maximum Channels: 1
Firmware Revision: 0
Host Name: anonymous
Vendor Name: 

Client <- Server:

Point-to-Point Tunnelling Protocol
Length: 156
Message type: Control Message (1)
Magic Cookie: 0x1a2b3c4d (correct)
Control Message Type: Start-Control-Connection-Reply (2)
Reserved: 0000
Protocol version: 1.0
Result Code: Successful channel establishment (1)
Error Code: None (0)
Framing Capabilities: Either Framing supported (3)
Bearer Capabilities: Either access supported (3)
Maximum Channels: 1
Firmware Revision: 0
Host Name: anonymouse
Vendor Name: anonymouse

Client -> Server:

Point-to-Point Tunnelling Protocol
Length: 168
Message type: Control Message (1)
Magic Cookie: 0x1a2b3c4d (correct)
Control Message Type: Outgoing-Call-Request (7)
Reserved: 0000
Call ID: 63211
Call Serial Number: 22277
Minimum BPS: 1000
Maximum BPS: 100000000
Bearer Type: Either access supported (3)
Framing Type: Either Framing supported (3)
Packet Receive Window Size: 8192
Packet Processing Delay: 0
Phone Number Length: 0
Reserved: 0000
Phone Number: 
Subaddress: 

Client <- Server:

Point-to-Point Tunnelling Protocol
Length: 32
Message type: Control Message (1)
Magic Cookie: 0x1a2b3c4d (correct)
Control Message Type: Outgoing-Call-Reply (8)
Reserved: 0000
Call ID: 63211
Peer Call ID: 22277
Result Code: Connected (1)
Error Code: None (0)
Cause Code: 0
Connect Speed: 256
Packet Receive Window Size: 8192
Packet Processing Delay: 0
Physical Channel ID: 0

...aber dann ist nicht klar, was passieren soll, der Client sendet nichts und alles hängt? Bitte sagen Sie mir, was für die Installation des Tunnels zwischen Client und Server fehlt.

verwandte Informationen