Ich verwende Debian 8 und muss Bluez und den Debian-Kernel aktualisieren. Bluez muss über 5.23 laufen, damit ein Bluetooth mit LE oder ein Smart-Bluetooth-Gerät funktioniert.
Ich verwende einen Mac und muss die Broadcom-Wireless-Treiber installieren, damit mein WLAN funktioniert.
Wenn ich es vermeide, meinen Kernel in Backports auf 4.2.0 zu aktualisieren, kann ich die beschriebenen Schritte befolgenHierund dann funktioniert mein WLAN einwandfrei, aber dann funktioniert mein Bluetooth-Gerät nicht.
Wenn ich auf den neuesten Kernel aktualisiere, funktioniert mein Bluetooth-Gerät nicht. Es funktioniert, wenn ich es mit Bluetoothctl koppele und verbinde, aber sobald ich die Maus nicht mehr bewege, wird die Kopplung aufgehoben und es stirbt. Ich muss es erneut koppeln/verbinden. Mit dem neuen Kernel ist dieses Problem behoben.
Also würde ich gerne versuchen, mein WLAN zu reparieren.
Ich folge dem Schritt von derWiki
beim Versuch, es auszuführen, sudo modprobe wl
erhalte ich die Meldung „Modprobe: FATAL: Modul nicht gefunden“.
uname -r 4.2.0-0.bpo.1-amd64
cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
gibt dies zurück und zeigt an, dass einige Build-Fehler vorliegen:
sudo apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
broadcom-sta-dkms linux-headers-amd64
0 upgraded, 2 newly installed, 0 to remove and 29 not upgraded.
Need to get 0 B/2,175 kB of archives.
After this operation, 14.5 MB of additional disk space will be used.
Selecting previously unselected package broadcom-sta-dkms.
(Reading database ... 171210 files and directories currently installed.)
Preparing to unpack .../broadcom-sta-dkms_6.30.223.248-3_all.deb ...
Unpacking broadcom-sta-dkms (6.30.223.248-3) ...
Selecting previously unselected package linux-headers-amd64.
Preparing to unpack .../linux-headers-amd64_3.16+63_amd64.deb ...
Unpacking linux-headers-amd64 (3.16+63) ...
Setting up broadcom-sta-dkms (6.30.223.248-3) ...
Loading new broadcom-sta-6.30.223.248 DKMS files...
First Installation: checking all kernels...
Building only for 4.2.0-0.bpo.1-amd64
Building initial module for 4.2.0-0.bpo.1-amd64
Error! Bad return status for module build on kernel: 4.2.0-0.bpo.1-amd64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log for more information.
Setting up linux-headers-amd64 (3.16+63) ...
blubee@naibed:~$ vi /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
blubee@naibed:~$ cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
DKMS make.log for broadcom-sta-6.30.223.248 for kernel 4.2.0-0.bpo.1-amd64 (x86_64)
Sat Oct 31 10:52:17 CST 2015
/bin/sh: 1: [: Illegal number:
/bin/sh: 1: [: Illegal number:
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/4.2.0-0.bpo.1-amd64/build M=`pwd`
make[1]: Entering directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
LD /var/lib/dkms/broadcom-sta/6.30.223.248/build/built-in.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/shared/linux_osl.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_linux.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_iw.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_key’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1390:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type
memcpy(params.key, key.data, params.key_len);
^
In file included from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string.h:4:0,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/string.h:17,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/bitmap.h:8,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/cpumask.h:11,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/cpumask.h:4,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/msr.h:10,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/processor.h:20,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/thread_info.h:49,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/thread_info.h:54,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/preempt.h:6,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/preempt.h:64,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/spinlock.h:50,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/seqlock.h:35,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/time.h:5,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/stat.h:18,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/module.h:10,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/include/linuxver.h:40,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:26:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string_64.h:34:14: note: expected ‘void *’ but argument is of type ‘const u8 *’
extern void *memcpy(void *to, const void *from, size_t len);
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_station’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: error: ‘STATION_INFO_TX_BITRATE’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_TX_BITRATE;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: note: each undeclared identifier is reported only once for each function it appears in
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1457:20: error: ‘STATION_INFO_SIGNAL’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_SIGNAL;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: At top level:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: initialization from incompatible pointer type
.get_station = wl_cfg80211_get_station,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’)
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: incompatible type for argument 3 of ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘enum cfg80211_bss_frame_type’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:3: warning: passing argument 7 of ‘cfg80211_inform_bss’ makes integer from pointer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘u16’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:26: warning: passing argument 8 of ‘cfg80211_inform_bss’ makes pointer from integer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘const u8 *’ but argument is of type ‘size_t’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: too few arguments to function ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: declared here
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2050:4: error: too few arguments to function ‘cfg80211_disconnected’
cfg80211_disconnected(ndev, 0, NULL, 0, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4584:6: note: declared here
void cfg80211_disconnected(struct net_device *dev, u16 reason,
^
/usr/src/linux-headers-4.2.0-0.bpo.1-common/scripts/Makefile.build:263: recipe for target '/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o' failed
make[4]: *** [/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
/usr/src/linux-headers-4.2.0-0.bpo.1-common/Makefile:1403: recipe for target '_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build' failed
make[3]: *** [_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build] Error 2
Makefile:146: recipe for target 'sub-make' failed
make[2]: *** [sub-make] Error 2
Makefile:8: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
Makefile:158: recipe for target 'all' failed
make: *** [all] Error 2
das ist das Build-Protokoll. Gibt es eine vernünftige Möglichkeit, dass ich auch mein WLAN und Bluetooth LE nutzen kann?
Ich habe diese Fehlerliste im Ubuntu-Bugtracker gefunden:https://bugs.launchpad.net/ubuntu/+source/broadcom-sta/+bug/1504975
Scheinbar bin ich nicht der Einzige mit diesem Problem.
Antwort1
https://launchpad.net/~longsleep/+archive/ubuntu/bcmwl Sollte das WLAN reparieren
Sie sollten es installieren können mit
sudo add-apt-repository ppa:longsleep/bcmwl
sudo apt-get update
sudo apt-get install bcmwl-kernel-sourceNeustart