Actualmente tengo mi servidor Ubuntu configurado como tal:
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x0003d22b
Device Boot Start End Blocks Id System
/dev/sda1 2048 195350527 97674240 fd Linux raid autodetect
/dev/sda2 * 195350528 3907028991 1855839232 fd Linux raid autodetect
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000cd8db
Device Boot Start End Blocks Id System
/dev/sdb1 2048 195350527 97674240 fd Linux raid autodetect
/dev/sdb2 * 195350528 3907028991 1855839232 fd Linux raid autodetect
Disk /dev/md1: 1900.2 GB, 1900244959232 bytes
2 heads, 4 sectors/track, 463926992 cylinders, total 3711415936 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/md0: 100.0 GB, 99951181824 bytes
2 heads, 4 sectors/track, 24402144 cylinders, total 195217152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00000000
Disk /dev/md0 doesn't contain a valid partition table
Me gustaría hacer la transición a un tipo de servidor RAID y LVM sin perder todo lo que he hecho hasta este momento. ¿Hay alguna manera de guardar /dev/md1 y luego colocarlo en mi unidad lógica recién creada?