Hola alguien puede ayudarme por favor? Aparece una pantalla negra después de instalar los controladores nvidia cuda.
UBUNTU 20.04, kernel 5.8.0-55-genérico
Versión del controlador NVIDIA-SMI 465.27
: 465.27
Versión CUDA: 11.3
20 gb de RAM, 2 gb Nvidia mx150, Intel Core i7-8550U.
También recibo este mensaje cuando intento ejecutar un modelo: "RuntimeError: CUDA sin memoria. Intenté asignar 20,00 MiB (GPU 0; 1,96 GiB de capacidad total; 2,00 MiB ya asignados; 9,50 MiB libres; 4,00 MiB reservados en total). por PyTorch) "
Bit de un ARCHIVO DE REGISTRO:
[29319.635864] NVRM:The NVIDIA probe routine failed for 1 device(s).
[29319.000029] NVRM: None of the NVIDIA devices were initialized.
[29319.002993] nvidia-nvlink: Unregistered the Nvlink Core, major device number 234
[29319.635059] nvidia-nvlink: Nvlink Core is being initialized, major device number 234
[29319.635823] NVRM: This is a 64-bit BAR mapped above 4GB by the system
[29319.635823] NVRM: BIOS or the Linux kernel, but the PCI bridge
[29319.635823] NVRM: immediately upstream of this GPU does not defineblack-screen-after-
install-of-nvidia-driver-ubuntu/109312
[29319.635823] NVRM: a matching prefetchable memory window.
[29319.635824] NVRM: This may be due to a known Linux kernel bug. Please
[29319.635824] NVRM: see the README section on 64-bit BARs for additional
[29319.635824] NVRM: information.
**********************************************************
dmesg |grep -i bridge
[ 0.303414] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.339965] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.347519] PCI host bridge to bus 0000:00
[ 0.368977] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.368980] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.368984] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff]
[ 0.368989] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.369455] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.369458] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.369461] pci 0000:00:1c.4: bridge window [mem 0x94100000-0x941fffff]
[ 0.374209] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.374214] pci 0000:00:1c.5: bridge window [mem 0x94000000-0x940fffff]
[ 0.379452] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.441100] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.441116] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.441119] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.441124] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff]
[ 0.441127] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.441133] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.441135] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.441139] pci 0000:00:1c.4: bridge window [mem 0x94100000-0x941fffff]
[ 0.441146] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.441150] pci 0000:00:1c.5: bridge window [mem 0x94000000-0x940fffff]
[ 8.398806] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
****************
dmesg |grep BAR
[ 0.348927] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.441100] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.441113] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.441114] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
*************
sudo lshw -c memory
*-memory UNCLAIMED
description: Memory controller
product: Sunrise Point-LP PMC
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 21
width: 32 bits
clock: 33MHz (30.3ns)
capabilities: bus_master
configuration: latency=0
resources: memory:942ac000-942affff