nmcli con up Wired\ connection\ 1
Error: Connection activation failed: No suitable device found for this connection
(device eno1 not available because profile is not compatible with device (permanent MAC address doesn't match)).
$ ping google.com
PING google.com (142.251.33.14) 56(84) bytes of data.
64 bytes from dfw25s44-in-f14.1e100.net (142.251.33.14): icmp_seq=1 ttl=58 time=28.9 ms
64 bytes from dfw25s44-in-f14.1e100.net (142.251.33.14): icmp_seq=2 ttl=58 time=32.9 ms
$ ping -c4 archive.canonical.com
PING archive.canonical.com (185.125.188.12) 56(84) bytes of data.
64 bytes from canonical-archive-0.canonical.com (185.125.188.12): icmp_seq=1 ttl=47 time=121 ms
64 bytes from canonical-archive-0.canonical.com (185.125.188.12): icmp_seq=2 ttl=47 time=122 ms
$ ping6 -c4 archive.canonical.com
$ ping6: connect: Network is unreachable
Lo intenté sudo apt-get updatey sudo apt-get upgradeno resolvió el problema.
Controlador Ethernet: Conexión Ethernet Intel Corporation I217-LM (rev 04)
Respuesta1
nmcli con up Wired\ connection\ 1
Error: Connection activation failed: No suitable device found for this connection
(device eno1 not available because profile is not compatible with device (permanent MAC address doesn't match)).
La ethernet.mac-addresspropiedad parece incorrecta.
Verifique el contenido del perfil con nmcli connection show "$PROFILE"o nmcli -o connection show "$PROFILE"-- donde está "$PROFILE" 'Wired connection 1'.
Luego ajuste ethernet.mac-addressa un valor adecuado. Posiblemente, simplemente desactívelo y configúrelo connection.interface-nameen su lugar.
nmcli connection modify "Wired connection 1" ethernet.mac-address '' connection.interface-name eno1.
Luego reactiva el perfil con nmcli connection up Wired\ connection\ 1.
Consulte man nm-settingsel significado de las propiedades del perfil de conexión.