El puerto Sata se reinicia cada minuto. ¿Es un cable defectuoso o la Tarjeta Multiplicadora de Puertos (Silicon Image)?

Question

Mi servidor Ubuntu tienenueveTarjetas "Multiplicador de puertos Sata 5 a 1" con tecnología Silicon Image. Recibo los siguientes mensajes en el syslog. Estos mensajes se repiten aproximadamente cada minuto. Por lo que tengo entendido, una de las tarjetas tiene algunos problemas y se está restableciendo el puerto. Y el reinicio tarda entre 4 y 5 segundos en todo el proceso.

¿Puede alguien decirme qué se puede deducir de estos errores? ¿Tengo que reemplazar la tarjeta? ¿O es el cable el que está defectuoso? Podría simplemente haber reemplazado el cable, pero con este diseño de servidor en particular (está hecho a medida), cambiar el cable requeriría mucho esfuerzo (casi igual a reemplazar la tarjeta misma).

Alguien me dijo que podría ser uno de los discos duros conectados a esta tarjeta en particular el que podría ser el culpable (tarda demasiado en girar o algo así). ¿Es eso cierto?

Además, smartctlen todos los discos duros de esta tarjeta, se muestra una gran cantidad de UDMA_CRC_Error_Counterrores.

Sep 28 20:54:26 zapdb1 kernel: [56523.744913] ata15.00: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744921] ata15.00: failed to read SCR 0 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744924] ata15.01: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744929] ata15.01: failed to read SCR 0 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744932] ata15.02: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744936] ata15.02: failed to read SCR 0 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744939] ata15.03: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744943] ata15.03: failed to read SCR 0 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744946] ata15.04: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744950] ata15.04: failed to read SCR 0 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744953] ata15.05: failed to read SCR 1 (Emask=0x40)
Sep 28 20:54:26 zapdb1 kernel: [56523.744960] ata15.15: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.745009] ata15.15: irq_stat 0x00060002, PMP DMA CS errata
Sep 28 20:54:26 zapdb1 kernel: [56523.745040] ata15.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.745088] ata15.00: failed command: READ DMA EXT
Sep 28 20:54:26 zapdb1 kernel: [56523.745120] ata15.00: cmd 25/00:00:80:9e:91/00:04:52:00:00/e0 tag 1 dma 524288 in
Sep 28 20:54:26 zapdb1 kernel: [56523.745122]          res 86/15:06:06:00:00/00:00:c0:12:86/00 Emask 0x2 (HSM violation)
Sep 28 20:54:26 zapdb1 kernel: [56523.745212] ata15.00: status: { Busy }
Sep 28 20:54:26 zapdb1 kernel: [56523.745237] ata15.00: error: { IDNF ABRT }
Sep 28 20:54:26 zapdb1 kernel: [56523.745265] ata15.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.745311] ata15.01: irq_stat 0x00060002, device error via D2H FIS
Sep 28 20:54:26 zapdb1 kernel: [56523.745341] ata15.01: failed command: READ DMA EXT
Sep 28 20:54:26 zapdb1 kernel: [56523.745373] ata15.01: cmd 25/00:00:78:9e:91/00:04:52:00:00/e0 tag 2 dma 524288 in
Sep 28 20:54:26 zapdb1 kernel: [56523.745375]          res 51/84:61:17:a0:91/00:02:52:00:00/02 Emask 0x10 (ATA bus error)
Sep 28 20:54:26 zapdb1 kernel: [56523.745466] ata15.01: status: { DRDY ERR }
Sep 28 20:54:26 zapdb1 kernel: [56523.745492] ata15.01: error: { ICRC ABRT }
Sep 28 20:54:26 zapdb1 kernel: [56523.745519] ata15.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.745565] ata15.02: failed command: READ DMA EXT
Sep 28 20:54:26 zapdb1 kernel: [56523.745597] ata15.02: cmd 25/00:00:78:9e:91/00:04:52:00:00/e0 tag 0 dma 524288 in
Sep 28 20:54:26 zapdb1 kernel: [56523.745599]          res 86/15:06:06:00:00/00:00:00:01:86/00 Emask 0x2 (HSM violation)
Sep 28 20:54:26 zapdb1 kernel: [56523.745689] ata15.02: status: { Busy }
Sep 28 20:54:26 zapdb1 kernel: [56523.745714] ata15.02: error: { IDNF ABRT }
Sep 28 20:54:26 zapdb1 kernel: [56523.745741] ata15.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.745788] ata15.03: failed command: READ DMA EXT
Sep 28 20:54:26 zapdb1 kernel: [56523.745819] ata15.03: cmd 25/00:d8:98:9a:91/00:03:52:00:00/e0 tag 4 dma 503808 in
Sep 28 20:54:26 zapdb1 kernel: [56523.745821]          res 86/15:06:06:00:00/00:00:00:47:86/00 Emask 0x2 (HSM violation)
Sep 28 20:54:26 zapdb1 kernel: [56523.745911] ata15.03: status: { Busy }
Sep 28 20:54:26 zapdb1 kernel: [56523.745936] ata15.03: error: { IDNF ABRT }
Sep 28 20:54:26 zapdb1 kernel: [56523.745963] ata15.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.746010] ata15.04: failed command: READ DMA EXT
Sep 28 20:54:26 zapdb1 kernel: [56523.746041] ata15.04: cmd 25/00:d8:98:9a:91/00:03:52:00:00/e0 tag 3 dma 503808 in
Sep 28 20:54:26 zapdb1 kernel: [56523.746043]          res 86/15:06:06:00:00/00:00:80:37:86/00 Emask 0x2 (HSM violation)
Sep 28 20:54:26 zapdb1 kernel: [56523.746133] ata15.04: status: { Busy }
Sep 28 20:54:26 zapdb1 kernel: [56523.746158] ata15.04: error: { IDNF ABRT }
Sep 28 20:54:26 zapdb1 kernel: [56523.746185] ata15.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
Sep 28 20:54:26 zapdb1 kernel: [56523.746234] ata15.15: hard resetting link
Sep 28 20:54:26 zapdb1 kernel: [56523.746237] ata15: controller in dubious state, performing PORT_RST
Sep 28 20:54:29 zapdb1 kernel: [56525.973515] ata15.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
Sep 28 20:54:29 zapdb1 kernel: [56525.974240] ata15.00: hard resetting link
Sep 28 20:54:29 zapdb1 kernel: [56526.293478] ata15.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Sep 28 20:54:29 zapdb1 kernel: [56526.293625] ata15.01: hard resetting link
Sep 28 20:54:29 zapdb1 kernel: [56526.613082] ata15.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 28 20:54:29 zapdb1 kernel: [56526.613131] ata15.02: hard resetting link
Sep 28 20:54:30 zapdb1 kernel: [56526.932262] ata15.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 28 20:54:30 zapdb1 kernel: [56526.932304] ata15.03: hard resetting link
Sep 28 20:54:30 zapdb1 kernel: [56527.252366] ata15.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 28 20:54:30 zapdb1 kernel: [56527.252417] ata15.04: hard resetting link
Sep 28 20:54:30 zapdb1 kernel: [56527.572270] ata15.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 28 20:54:30 zapdb1 kernel: [56527.572346] ata15.05: hard resetting link
Sep 28 20:54:31 zapdb1 kernel: [56527.891317] ata15.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
Sep 28 20:54:31 zapdb1 kernel: [56527.894471] ata15.00: configured for UDMA/33
Sep 28 20:54:31 zapdb1 kernel: [56527.897816] ata15.01: configured for UDMA/33
Sep 28 20:54:31 zapdb1 kernel: [56527.901165] ata15.02: configured for UDMA/33
Sep 28 20:54:31 zapdb1 kernel: [56527.904446] ata15.03: configured for UDMA/33
Sep 28 20:54:31 zapdb1 kernel: [56527.907628] ata15.04: configured for UDMA/33
Sep 28 20:54:31 zapdb1 kernel: [56527.908096] ata15: EH complete

Answer 1

A menudo he descubierto que se trata de un problema de poder. no se suministra suficiente energía al variador.