Tengo un problema con mi servidor proxmox. A veces no puedo acceder a mi servidor. Ping o Ssh no funcionan, he intentado conectar mi pantalla al servidor para comprobar qué pasa pero no tengo imagen. El servidor está encendido. Puedo escuchar el ventilador encendido.
Estoy usando proxmox (KVM). Revisé el registro pero no encontré nada en el registro entre las 6:25 a. m. y las 12:50 p. m., reinicié usando el botón a las 12:50 p. m. ¿Puede decirme qué registro puedo comprobar o alguna idea?
cat /var/log/messages
Dec 10 18:03:50 pve kernel: [ 181.275269] vmbr0: port 2(fwpr105p0) entered
blocking state
Dec 10 18:03:50 pve kernel: [ 181.275271] vmbr0: port 2(fwpr105p0) entered disabled state
Dec 10 18:03:50 pve kernel: [ 181.275331] device fwpr105p0 entered promiscuous mode
Dec 10 18:03:50 pve kernel: [ 181.275358] vmbr0: port 2(fwpr105p0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.275360] vmbr0: port 2(fwpr105p0) entered forwarding state
Dec 10 18:03:50 pve kernel: [ 181.277620] fwbr105i0: port 2(veth105i0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.277621] fwbr105i0: port 2(veth105i0) entered disabled state
Dec 10 18:03:50 pve kernel: [ 181.277672] device veth105i0 entered promiscuous mode
Dec 10 18:03:50 pve kernel: [ 181.351567] eth0: renamed from vethRS2AYN
Dec 10 18:03:50 pve pve-ha-lrm[2245]: <root@pam> end task UPID:pve:000008C8:0000355B:5DEFCFC9:vzstart:105:root@pam: OK
Dec 10 18:03:50 pve kernel: [ 181.648166] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 10 18:03:50 pve kernel: [ 181.648174] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 10 18:03:50 pve kernel: [ 181.648208] fwbr105i0: port 2(veth105i0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.648210] fwbr105i0: port 2(veth105i0) entered forwarding state
Dec 11 03:20:53 pve pveupdate[22976]: <root@pam> starting task UPID:pve:000059D3:00334700:5DF05285:aptupdate::root@pam:
Dec 11 03:20:56 pve pveupdate[22976]: <root@pam> end task UPID:pve:000059D3:00334700:5DF05285:aptupdate::root@pam: OK
Dec 11 06:25:13 pve liblogging-stdlog: [origin software="rsyslogd" swVersion="8.24.0" x-pid="1134" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Dec 11 23:54:34 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 11 23:54:40 pve pvedaemon[1934]: <root@pam> starting task UPID:pve:000039B8:00A43BC4:5DF173B0:qmstart:114:root@pam:
Dec 11 23:54:41 pve kernel: [107633.572724] device tap114i0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.593096] fwbr114i0: port 1(fwln114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.593097] fwbr114i0: port 1(fwln114i0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.593157] device fwln114i0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.593186] fwbr114i0: port 1(fwln114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.593188] fwbr114i0: port 1(fwln114i0) entered forwarding state
Dec 11 23:54:41 pve kernel: [107633.595855] vmbr0: port 3(fwpr114p0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.595857] vmbr0: port 3(fwpr114p0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.595921] device fwpr114p0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.595936] vmbr0: port 3(fwpr114p0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.595937] vmbr0: port 3(fwpr114p0) entered forwarding state
Dec 11 23:54:41 pve kernel: [107633.598134] fwbr114i0: port 2(tap114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.598136] fwbr114i0: port 2(tap114i0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.598194] fwbr114i0: port 2(tap114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.598195] fwbr114i0: port 2(tap114i0) entered forwarding state
Dec 11 23:54:41 pve pvedaemon[1934]: <root@pam> end task UPID:pve:000039B8:00A43BC4:5DF173B0:qmstart:114:root@pam: OK
Dec 12 00:09:28 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:24:29 pve pvedaemon[1935]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:39:30 pve pvedaemon[1936]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:54:31 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:09:32 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:24:32 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:39:33 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:54:34 pve pvedaemon[1521]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:09:35 pve pvedaemon[31283]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:24:36 pve pvedaemon[1521]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:39:37 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 04:42:01 pve pveupdate[7733]: <root@pam> starting task UPID:pve:00001E5C:00BE8A77:5DF1B709:aptupdate::root@pam:
Dec 12 04:42:03 pve pveupdate[7733]: <root@pam> end task UPID:pve:00001E5C:00BE8A77:5DF1B709:aptupdate::root@pam: OK
Dec 12 06:25:05 pve liblogging-stdlog: [origin software="rsyslogd" swVersion="8.24.0" x-pid="1134" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Dec 12 12:50:45 pve kernel: [ 0.000000] Linux version 4.15.18-23-pve (build@pve) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.18-51 (Wed, 13 Nov 2019 11:20:34 +0100) ()
Dec 12 12:50:45 pve kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-23-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on
Dec 12 12:50:45 pve kernel: [ 0.000000] KERNEL supported cpus:
Dec 12 12:50:45 pve kernel: [ 0.000000] Intel GenuineIntel
Gracias
Respuesta1
El problema provenía de la RAM. Acabo de hacer Memtest y desde hace 7 días no tengo el sistema inactivo.