☰

Etiquetado de subflotadores

tag-icon • tag-icon positioning subfloats labels
Etiquetado de subflotadores

Estoy trabajando en una figura que contiene 30 higos, 5 filas 6 cols. Lo que quiero hacer es: al principio de cada fila de la figura quiero escribir algo de texto, pero quiero que se escriba vertical, no horizontal. Para las columnas quiero escribir un texto y agruparlo para cada dos columnas, así por ejemplo en la parte superior de las columnas 1 y 2 escriba data1 que se centrará entre las 2 columnas. Esto es realmente difícil para mí.

Esta figura explica lo que quiero hacer donde quiero poner texto en los marcadores rojos.

deseado

Esta es una muestra de mi código:

\begin{figure*}[t]
\centering
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_no_of_levels}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_entropy}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_mean}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_no_of_levels}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_entropy}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_mean}}\\
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_no_of_levels}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_entropy}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}
\subfloat[]{\includegraphics[width=.33\linewidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}
\caption{aaa}
\label{fig:rulascore}
\end{figure*}

actualizar:

Actualicé mi código "a continuación" pero no aparece nada como se muestra en esta imagenactualizar

código utilizado:

\begin{figure*}
\centering
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image11) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image12) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_entropy}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image13) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image14) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_entropy}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image15) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image16) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_entropy}};
\end{tikzpicture}}\\
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image21) 
  {\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_entropy}}\hfill
\subfloat[]{\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_no_of_levels}}\hfill
\subfloat[]{\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_entropy}}\hfill
\subfloat[]{\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_no_of_levels}}\hfill
\subfloat[]{\includegraphics[trim=2cm 7cm 2cm 7cm, clip=true,width=.15\linewidth]{../Hussein/MatFiles/interference/1500/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms/x320_Sensor_Lights_On_1500mm_with_interference_distance_1100-pgms_entropy}}
\caption{aaa}
\label{fig:rulascore}
\end{figure*}

\begin{tikzpicture}[remember picture,overlay]
\node[above] at ( $ (image11.north)!0.5!(image12.north) $ ) {some text goes here};
\node[above] at ( $ (image13.north)!0.5!(image14.north) $ ) {some text goes here};
\node[above] at ( $ (image15.north)!0.5!(image16.north) $ ) {some text goes here};
\node[rotate=90,yshift=10pt] at (image11.west) {some text};
\node[rotate=90,yshift=10pt] at (image21.west) {some text};
\end{tikzpicture}

Respuesta1

Aquí hay una posibilidad usandoTikZ; la idea es colocar cada figura de la primera fila y de la primera columna dentro de un nodo con nombre, y luego utilizar estos nodos para colocar los textos:

\documentclass{article}
\usepackage{subfig}
\usepackage[demo]{graphicx}
\usepackage{tikz}
\usetikzlibrary{calc}

\tikzset{
  mynode/.style={anchor=south west,inner sep=0,outer sep=0pt}}

\begin{document}

\begin{figure*}
\centering
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image11) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image12) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_entropy}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image13) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/k640_Sensor_Lights_On_1000mm-pgms/k640_Sensor_Lights_On_1000mm-pgms_mean}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image14) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image15) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_entropy}};
\end{tikzpicture}}\hfill
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image16) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x640_Sensor_Lights_On_1000mm-pgms/x640_Sensor_Lights_On_1000mm-pgms_mean}};
\end{tikzpicture}}\\
\subfloat[]{%
\begin{tikzpicture}[remember picture]
  \node[mynode] (image21) 
  {\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_no_of_levels}};
\end{tikzpicture}}\hfill
\subfloat[]{\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_entropy}}\hfill
\subfloat[]{\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}\hfill
\subfloat[]{\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}\hfill
\subfloat[]{\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}\hfill
\subfloat[]{\includegraphics[width=.15\textwidth]{../Hussein/MatFiles/Lights/x320_Sensor_Lights_On_1000mm-pgms/x320_Sensor_Lights_On_1000mm-pgms_mean}}
\caption{aaa}
\label{fig:rulascore}
\end{figure*}

\begin{tikzpicture}[remember picture,overlay]
\node[above] at ( $ (image11.north)!0.5!(image12.north) $ ) {some text goes here};
\node[above] at ( $ (image13.north)!0.5!(image14.north) $ ) {some text goes here};
\node[above] at ( $ (image15.north)!0.5!(image16.north) $ ) {some text goes here};
\node[rotate=90,yshift=10pt] at (image11.west) {some text};
\node[rotate=90,yshift=10pt] at (image21.west) {some text};
\end{tikzpicture}

\end{document}

ingrese la descripción de la imagen aquí

La demoopción graphicxsimplemente reemplaza las figuras reales con rectángulos negros; hacernoutilice esa opción en su documento real.

No está directamente relacionado con la pregunta, pero sus imágenes eran demasiado anchas para el ancho del área de texto (¿o quizás está escribiendo un documento de dos columnas?); en cualquier caso, cambié el ancho de 0.33\linewidtha 0.15\textwidthy usé \hfillpara separar uniformemente las figuras en cada fila (por supuesto, puedes revertir estos cambios). Además, la opción [t]puede figureser demasiado restrictiva; Lo suprimí de mi ejemplo.

información relacionada