¿Por qué fail2ban 0.8 no se inicia correctamente en Debain 7 Wheezy x64?
Hola,
Estoy intentando configurar fail2ban para que funcione con APF. Pero primero, sería fantástico si se pudiera iniciar fail2ban.
root@akdom:/var/log# /etc/init.d/fail2ban start
[ **ok** ] Starting authentication failure monitor: fail2ban.
root@akdom:/var/log# /etc/init.d/fail2ban status
[**FAIL**] Status of authentication failure monitor:[....] fail2ban is not running ... **failed**!
root@akdom:/var/log#
/etc/fail2ban/jail.local (Mismo contenido en jail.conf)
[DEFAULT]
ignoreip = 127.0.0.1/8
bantime = 600
maxretry = 3
findtime = 600
backend = auto
#
# ACTIONS
#
banaction = apf
mta = sendmail
protocol = tcp
chain = INPUT
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(cha$
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%(c$
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s", cha$
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s", chain="%($
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s, $
action = %(action_)s
#JAIL
[ssh]
enabled = true
port = ssh
filter = sshd
logpath = /var/log/auth.log
maxretry = 6
[ssh-iptables]
enabled = true
filter = sshd
action = iptables[name=SSH, port=ssh, protocol=tcp]
logpath = /var/log/auth.log
maxretry = 5
fail2ban.conf
socket = /var/run/fail2ban/fail2ban.sock (This file doesn'T exist, prehaps because fail2ban is not lauched properly)
Es importante para mí configurarlo rápido porque a China le gusta la IP de mi servidor (según auth.log) :)
Al buscar en DuckDuckGo encontré un par de información para solucionar problemas: intenté eliminarlo e instalarlo nuevamente. fail2ban-regex funciona perfectamente y devuelve más de 10000 resultados durante los últimos 2 días. La ruta auth.log es válida.
Ahora estoy pensando en instalar la versión preliminar 0.9 para ver si funciona.
¿Alguna idea para hacerlo funcionar?
Gracias
EDITAR Con set -x en /etc/init.d/fail2ban
Comando: /etc/init.d/fail2ban inicio
/var/log/fail2ban.log todavía está vacío.
root@akdom:/etc/fail2ban# /etc/init.d/fail2ban start
+ DESC=authentication failure monitor
+ NAME=fail2ban
+ DAEMON=/usr/bin/fail2ban-client
+ SCRIPTNAME=/etc/init.d/fail2ban
+ grep+ sed -h ^[^#]*socket *= /etc/fail2ban/fail2ban.conf /etc/fail2ban/fail2ban.local -e s/.*socket *= *//g
-e s/ *$//g
+ tail -n 1
+ SOCKFILE=/var/run/fail2ban/fail2ban.sock
+ [ -z /var/run/fail2ban/fail2ban.sock ]
+ [ -x /usr/bin/fail2ban-client ]
+ FAIL2BAN_USER=root
+ [ -r /etc/default/fail2ban ]
+ . /etc/default/fail2ban
+ FAIL2BAN_OPTS=
+ DAEMON_ARGS=
+ [ -f /etc/default/rcS ]
+ . /etc/default/rcS
+ . /lib/lsb/init-functions
+ run-parts --lsbsysinit --list /lib/lsb/init-functions.d
+ [ -r /lib/lsb/init-functions.d/20-left-info-blocks ]
+ . /lib/lsb/init-functions.d/20-left-info-blocks
+ FANCYTTY=
+ [ -e /etc/lsb-base-logging.sh ]
+ true
+ command=start
+ [ != no ]
+ log_daemon_msg Starting authentication failure monitor fail2ban
+ [ -z Starting authentication failure monitor ]
+ log_daemon_msg_pre Starting authentication failure monitor fail2ban
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z ]
+ FANCYTTY=1
+ true
+ /bin/echo -n [....]
[....] + [ -z fail2ban ]
+ /bin/echo -n Starting authentication failure monitor: fail2ban
Starting authentication failure monitor: fail2ban+ log_daemon_msg_post Starting authentication failure monitor fail2ban
+ :
+ do_start start
+ do_status
+ /usr/bin/fail2ban-client ping
+ return 255
+ [ -e /var/run/fail2ban/fail2ban.sock ]
+ [ -d /var/run/fail2ban ]
+ [ root != root ]
+ start-stop-daemon --start --quiet --chuid root --exec /usr/bin/fail2ban-client -- start
+ return 2
+ [ != no ]
+ log_end_msg_wrapper 0 2
+ [ 0 -lt 2 ]
+ value=0
+ log_end_msg 0
+ [ -z 0 ]
+ local retval
+ retval=0
+ log_end_msg_pre 0
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z 1 ]
+ true
+ true
+ /usr/bin/tput setaf 1
+ RED=
+ /usr/bin/tput setaf 2
+ GREEN=
+ /usr/bin/tput setaf 3
+ YELLOW=
+ /usr/bin/tput op
+ NORMAL=
+ /usr/bin/tput civis
+ /usr/bin/tput sc
+ /usr/bin/tput hpa 0
+ [ 0 -eq 0 ]
+ /bin/echo -ne [ ok
[ ok + /usr/bin/tput rc
+ /usr/bin/tput cnorm
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z 1 ]
+ true
+ true
+ /usr/bin/tput setaf 1
+ RED=
+ /usr/bin/tput setaf 3
+ YELLOW=
+ /usr/bin/tput op
+ NORMAL=
+ [ 0 -eq 0 ]
+ echo .
.
+ log_end_msg_post 0
+ :
+ return 0
+ :
root@akdom:/etc/fail2ban#
EDITAR
reglas de iptables
root@akdom:~# iptables -L -n --line-numbers
Chain INPUT (policy ACCEPT)
num target prot opt source destination
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
root@akdom:~#
/etc/init.d/fail2ban reiniciar
root@akdom:~# /etc/init.d/fail2ban restart
+ DESC=authentication failure monitor
+ NAME=fail2ban
+ DAEMON=/usr/bin/fail2ban-client
+ SCRIPTNAME=/etc/init.d/fail2ban
+ tail -n 1
+ sed -e s/.*socket *= *//g -e s/ *$//g
+ grep -h ^[^#]*socket *= /etc/fail2ban/fail2ban.conf /etc/fail2ban/fail2ban.local
+ SOCKFILE=/var/run/fail2ban/fail2ban.sock
+ [ -z /var/run/fail2ban/fail2ban.sock ]
+ [ -x /usr/bin/fail2ban-client ]
+ FAIL2BAN_USER=root
+ [ -r /etc/default/fail2ban ]
+ . /etc/default/fail2ban
+ FAIL2BAN_OPTS=
+ DAEMON_ARGS=
+ [ -f /etc/default/rcS ]
+ . /etc/default/rcS
+ . /lib/lsb/init-functions
+ run-parts --lsbsysinit --list /lib/lsb/init-functions.d
+ [ -r /lib/lsb/init-functions.d/20-left-info-blocks ]
+ . /lib/lsb/init-functions.d/20-left-info-blocks
+ FANCYTTY=
+ [ -e /etc/lsb-base-logging.sh ]
+ true
+ command=restart
+ log_daemon_msg Restarting authentication failure monitor fail2ban
+ [ -z Restarting authentication failure monitor ]
+ log_daemon_msg_pre Restarting authentication failure monitor fail2ban
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z ]
+ FANCYTTY=1
+ true
+ /bin/echo -n [....]
[....] + [ -z fail2ban ]
+ /bin/echo -n Restarting authentication failure monitor: fail2ban
Restarting authentication failure monitor: fail2ban+ log_daemon_msg_post Restarting authentication failure monitor fail2ban
+ :
+ do_stop
+ /usr/bin/fail2ban-client status
+ return 1
+ do_start
+ do_status
+ /usr/bin/fail2ban-client ping
+ return 255
+ [ -e /var/run/fail2ban/fail2ban.sock ]
+ [ -d /var/run/fail2ban ]
+ [ root != root ]
+ start-stop-daemon --start --quiet --chuid root --exec /usr/bin/fail2ban-client -- start
+ return 2
+ log_end_msg_wrapper 2 1
+ [ 2 -lt 1 ]
+ value=1
+ log_end_msg 1
+ [ -z 1 ]
+ local retval
+ retval=1
+ log_end_msg_pre 1
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z 1 ]
+ true
+ true
+ /usr/bin/tput setaf 1
+ RED=
+ /usr/bin/tput setaf 2
+ GREEN=
+ /usr/bin/tput setaf 3
+ YELLOW=
+ /usr/bin/tput op
+ NORMAL=
+ /usr/bin/tput civis
+ /usr/bin/tput sc
+ /usr/bin/tput hpa 0
+ [ 1 -eq 0 ]
+ [ 1 -eq 255 ]
+ /bin/echo -ne [FAIL
[FAIL+ /usr/bin/tput rc
+ /usr/bin/tput cnorm
+ log_use_fancy_output
+ TPUT=/usr/bin/tput
+ EXPR=/usr/bin/expr
+ [ -t 1 ]
+ [ xxterm != x ]
+ [ xxterm != xdumb ]
+ [ -x /usr/bin/tput ]
+ [ -x /usr/bin/expr ]
+ /usr/bin/tput hpa 60
+ /usr/bin/tput setaf 1
+ [ -z 1 ]
+ true
+ true
+ /usr/bin/tput setaf 1
+ RED=
+ /usr/bin/tput setaf 3
+ YELLOW=
+ /usr/bin/tput op
+ NORMAL=
+ [ 1 -eq 0 ]
+ [ 1 -eq 255 ]
+ /bin/echo -e failed!
failed!
+ log_end_msg_post 1
+ :
+ return 1
- :
Respuesta1
Tuve el mismo problema. Hay algunos parámetros de configuración obsoletos en la nueva versión de fail2ban.
Los siguientes pasos solucionaron eso. Primera desinstalación con eliminación de todos los archivos de configuración:
apt-get remove fail2ban --purge
Después de eso reinstale:
apt-get install fail2ban
Después de estos pasos, su configuración está en la configuración predeterminada y debe editarse según sus necesidades.
Respuesta2
Intente ejecutar el siguiente comando:
start-stop-daemon --start --quiet --chuid fail2ban --exec /usr/bin/fail2ban-client -- start
Elimine "--chuid fail2ban" si ejecuta fail2ban como root (el valor predeterminado). Esto debería mostrarle los errores en su configuración que impiden que se inicie el servidor.