
Actualmente estoy intentando configurar una LAN en dos máquinas con una máscara de red; 255.255.255.0
sin embargo, recibo el siguiente mensaje cuando intento comunicarme entre ambas;
[root@alpha ~]# ping 192.168.0.249
PING 192.168.0.249 (192.168.0.249) 56(84) bytes of data.
From 192.168.0.248 icmp_seq=2 Destination Host Unreachable
From 192.168.0.248 icmp_seq=3 Destination Host Unreachable
From 192.168.0.248 icmp_seq=4 Destination Host Unreachable
--- 192.168.0.249 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5175ms
Esto también sucede a la inversa en la otra máquina dedicada. No tengo idea de qué hice mal, reinicié y reinicié el servicio de red varias veces y todavía no tengo suerte.
Como puede ver a continuación, ARP no devuelve direcciones LAN, sin embargo, debería mostrar las dos. IPTables está deshabilitado y la IP pública normal permitirá pings.
Detalles de Dedi #1:
[root@alpha ~]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:25:90:C8:81:4C
inet addr:192.168.0.248 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fec8:814c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3634 errors:0 dropped:0 overruns:0 frame:0
TX packets:197 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:220672 (215.5 KiB) TX bytes:10318 (10.0 KiB)
Memory:f7180000-f7200000
[root@alpha ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
*.*.*.152 0.0.0.0 255.255.255.248 U 0 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1
0.0.0.0 *.*.*.153 0.0.0.0 UG 0 0 0 eth1
[root@alpha ~]# arp -a
? (*.*.*.153) at 74:8e:f8:f7:98:58 [ether] on eth1
Detalles de Dedi #2:
[root@beta network-scripts]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:25:90:C5:C8:A0
inet addr:192.168.0.249 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:90ff:fec5:c8a0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:3576 (3.4 KiB)
Memory:f7180000-f7200000
[root@beta network-scripts]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
*.*.*.128 0.0.0.0 255.255.255.248 U 0 0 0 eth1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth1
0.0.0.0 *.*.*.129 0.0.0.0 UG 0 0 0 eth1
[root@beta network-scripts]# arp -a
? (*.*.*.129) at 74:8e:f8:fa:b9:8e [ether] on eth1
Respuesta1
Si bien no estoy 100% seguro (tendría que comunicarse con SecureServers), la mayoría de las empresas de hosting aíslan los servidores que están en el mismo conmutador con una entrada VLAN o ACL. De esta forma, sus servidores no pueden verse entre sí.
Póngase en contacto con su empresa de hosting para estar seguro. Lo más probable es que tengan que configurar una red "interna" dedicada para usted o que usted necesite utilizar una solución VPN.