Estoy acostumbrado a analizar el resultado del smartctl -A
uso grep
de atributos específicos. Ejemplo:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 063 044 Pre-fail Always - 82584316
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 31
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 4559064434
9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 36412
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 24
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 057 045 Old_age Always - 34 (Min/Max 33/43)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2521
194 Temperature_Celsius 0x0022 034 043 000 Old_age Always - 34 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 114 099 000 Old_age Always - 82584316
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 242167436053925
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1025335933
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2789359564
Tengo un servidor nuevo que no genera la tabla de atributos. Ejemplo:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 31 C
Drive Trip Temperature: 85 C
Manufactured in week 23 of year 2017
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 17
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 1028
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 650467008839680
¿Dónde se fue la mesa?
¿Cómo puedo hacer que se muestre?
¿O cuál es la nueva forma de analizarlo?
Gracias por tu ayuda.
Saludos
Santiago
Siguiendo la pregunta de Michael Hampton, aquí está el resultado completo de smartctl -a en el primer caso:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST500NM0011
Serial Number: Z1M1T0H0
LU WWN Device Id: 5 000c50 0651f7b09
Firmware Version: PA09
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Aug 31 12:31:29 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 063 044 Pre-fail Always - 82654102
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 31
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 4559226154
9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 36438
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 24
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 065 057 045 Old_age Always - 35 (Min/Max 33/43)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 2523
194 Temperature_Celsius 0x0022 035 043 000 Old_age Always - 35 (0 13 0 0)
195 Hardware_ECC_Recovered 0x001a 114 099 000 Old_age Always - 82654102
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 212064010276287
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1030640949
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2789364021
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -
# 2 Extended offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Y en el segundo:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUH728060AL5200
Revision: A909
Compliance: SPC-4
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca23c11809c
Serial number: 2QG9MD9X
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Fri Aug 31 12:34:53 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 32 C
Drive Trip Temperature: 85 C
Manufactured in week 23 of year 2017
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 17
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 1029
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 651482500169728
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 37886 80852.848 0
write: 0 0 0 0 172703 7066.032 0
verify: 0 0 0 0 1248 0.000 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 13 - [- - -]
# 2 Background short Completed - 12 - [- - -]
# 3 Background short Completed - 10 - [- - -]
# 4 Background short Completed - 10 - [- - -]
# 5 Background short Completed - 5 - [- - -]
# 6 Background short Completed - 3 - [- - -]
# 7 Background short Completed - 3 - [- - -]
# 8 Background short Completed - 0 - [- - -]
Long (extended) Self Test duration: 61354 seconds [1022.6 minutes]
Espero que sea suficiente.
Respuesta1
Su nueva unidad HGST es una unidad SAS, no una unidad SATA.
Las unidades SAS no proporcionan una tabla relativamente estándar de atributos SMART como lo hacen las unidades SATA.
Desde elPreguntas frecuentes sobre smartmontools:
Las unidades SCSI/SAS y NVMe no proporcionan atributos SMART similares a ATA/SATA. Por lo tanto, la base de datos de unidades no contiene ninguna entrada para estas unidades. Esto puede cambiar en el futuro ya que algunas unidades proporcionan información similar a través de comandos específicos del proveedor (consultebillete #870).
Las unidades SAS de algunos proveedores proporcionan una funcionalidad similar específica del proveedor, como señalaron los mantenedores en las preguntas frecuentes.
La mayoría deinteresanteDe todos modos, la información ya está presente aquí, p. ej. temperatura del variador, estadísticas de corrección de errores, informes de autocomprobación. Para esta unidad, al menos, no es probable que necesite datos que no estén ya expuestos.