Estoy ejecutando Debian 8 y necesito actualizar bluez y el kernel de Debian. Bluez debe tener una versión superior a 5.23 para que funcione un bluetooth con LE o un dispositivo bluetooth inteligente.
Estoy en una Mac y necesito instalar los controladores inalámbricos de Broadcom para que mi wifi funcione.
Si evito actualizar mi kernel a 4.2.0 en los backports, puedo seguir los pasos descritosaquíy luego mi wifi funciona bien pero mi dispositivo bluetooth no funciona.
Si actualizo al último kernel, mi dispositivo Bluetooth no funciona. Funciona cuando lo emparejo y conecto con bluetoothctl pero tan pronto como dejo de mover el mouse, se desvincula y muere. Tengo que volver a emparejar/conectar nuevamente. Este problema desapareció con el nuevo kernel.
Entonces me gustaría intentar arreglar mi wifi.
Sigo el paso desde elwiki
cuando intento ejecutarlo, sudo modprobe wl
aparece modprobe: FATAL: No se encontró el módulo.
uname -r 4.2.0-0.bpo.1-amd64
cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
devuelve esto y muestra que hay algunos errores de compilación:
sudo apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
broadcom-sta-dkms linux-headers-amd64
0 upgraded, 2 newly installed, 0 to remove and 29 not upgraded.
Need to get 0 B/2,175 kB of archives.
After this operation, 14.5 MB of additional disk space will be used.
Selecting previously unselected package broadcom-sta-dkms.
(Reading database ... 171210 files and directories currently installed.)
Preparing to unpack .../broadcom-sta-dkms_6.30.223.248-3_all.deb ...
Unpacking broadcom-sta-dkms (6.30.223.248-3) ...
Selecting previously unselected package linux-headers-amd64.
Preparing to unpack .../linux-headers-amd64_3.16+63_amd64.deb ...
Unpacking linux-headers-amd64 (3.16+63) ...
Setting up broadcom-sta-dkms (6.30.223.248-3) ...
Loading new broadcom-sta-6.30.223.248 DKMS files...
First Installation: checking all kernels...
Building only for 4.2.0-0.bpo.1-amd64
Building initial module for 4.2.0-0.bpo.1-amd64
Error! Bad return status for module build on kernel: 4.2.0-0.bpo.1-amd64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log for more information.
Setting up linux-headers-amd64 (3.16+63) ...
blubee@naibed:~$ vi /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
blubee@naibed:~$ cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
DKMS make.log for broadcom-sta-6.30.223.248 for kernel 4.2.0-0.bpo.1-amd64 (x86_64)
Sat Oct 31 10:52:17 CST 2015
/bin/sh: 1: [: Illegal number:
/bin/sh: 1: [: Illegal number:
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/4.2.0-0.bpo.1-amd64/build M=`pwd`
make[1]: Entering directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
LD /var/lib/dkms/broadcom-sta/6.30.223.248/build/built-in.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/shared/linux_osl.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_linux.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_iw.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_key’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1390:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type
memcpy(params.key, key.data, params.key_len);
^
In file included from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string.h:4:0,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/string.h:17,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/bitmap.h:8,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/cpumask.h:11,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/cpumask.h:4,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/msr.h:10,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/processor.h:20,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/thread_info.h:49,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/thread_info.h:54,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/preempt.h:6,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/preempt.h:64,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/spinlock.h:50,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/seqlock.h:35,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/time.h:5,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/stat.h:18,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/module.h:10,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/include/linuxver.h:40,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:26:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string_64.h:34:14: note: expected ‘void *’ but argument is of type ‘const u8 *’
extern void *memcpy(void *to, const void *from, size_t len);
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_station’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: error: ‘STATION_INFO_TX_BITRATE’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_TX_BITRATE;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: note: each undeclared identifier is reported only once for each function it appears in
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1457:20: error: ‘STATION_INFO_SIGNAL’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_SIGNAL;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: At top level:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: initialization from incompatible pointer type
.get_station = wl_cfg80211_get_station,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’)
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: incompatible type for argument 3 of ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘enum cfg80211_bss_frame_type’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:3: warning: passing argument 7 of ‘cfg80211_inform_bss’ makes integer from pointer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘u16’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:26: warning: passing argument 8 of ‘cfg80211_inform_bss’ makes pointer from integer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘const u8 *’ but argument is of type ‘size_t’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: too few arguments to function ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: declared here
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2050:4: error: too few arguments to function ‘cfg80211_disconnected’
cfg80211_disconnected(ndev, 0, NULL, 0, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4584:6: note: declared here
void cfg80211_disconnected(struct net_device *dev, u16 reason,
^
/usr/src/linux-headers-4.2.0-0.bpo.1-common/scripts/Makefile.build:263: recipe for target '/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o' failed
make[4]: *** [/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
/usr/src/linux-headers-4.2.0-0.bpo.1-common/Makefile:1403: recipe for target '_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build' failed
make[3]: *** [_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build] Error 2
Makefile:146: recipe for target 'sub-make' failed
make[2]: *** [sub-make] Error 2
Makefile:8: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
Makefile:158: recipe for target 'all' failed
make: *** [all] Error 2
ese es el registro de compilación. ¿Existe alguna forma razonable de poder tener mi wifi y bluetooth LE también?
Encontré esta lista de errores en el rastreador de errores de ubuntu:https://bugs.launchpad.net/ubuntu/+source/broadcom-sta/+bug/1504975
Parece que no soy el único que se enfrenta a este problema.
Respuesta1
https://launchpad.net/~longsleep/+archive/ubuntu/bcmwl Debería arreglar el wifi
Deberías poder instalarlo con
sudo add-apt-repository ppa:longsleep/bcmwl
sudo apt-get update
sudo apt-get install bcmwl-kernel-sourceReiniciar