Tengo algunos problemas para que mi tercera pantalla funcione correctamente.
Tenía pantallas triples funcionando bien en 12.04, usando 2 tarjetas nvidia. Realicé una nueva instalación de 14.04 y tuve un sinfín de problemas para que funcionara.
Simplemente estará deshabilitado o la pantalla estará en negro con el cursor como una X. Solo puedo habilitarlo desde la herramienta de configuración del servidor nvidia. La configuración de pantalla nativa de Ubuntu ni siquiera mostrará la tercera pantalla.
Intenté copiar xorg.conf de mi instalación anterior, que al reiniciar X funcionó bien en la pantalla de inicio de sesión, pero luego permaneció allí después de iniciar sesión y no hizo nada (el mouse todavía estaba funcionando).
Estoy usando gnome-session-fallback en lugar de unity si eso hace alguna diferencia. Sin embargo, sigo teniendo estos problemas si pruebo la unidad.
¿Cómo hago para que mi tercera pantalla funcione y muestre un escritorio?
Aquí está mi xorg.conf actual
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 1907FP"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: unknown, VertRefresh source: unknown
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DELL 1907FP"
HorizSync 0.0 - 0.0
VertRefresh 0.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "DELL 1907FP"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 580"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 520"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 520"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0"
# Removed Option "SLI" "Off"
# Removed Option "BaseMosaic" "off"
# Removed Option "metamodes" "GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-2: nvidia-auto-select +0+0, GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-3: nvidia-auto-select +1280+0, GPU-82e96214-175e-5e6a-218c-5bdbc948daf2.DVI-I-1: nvidia-auto-select +3200+0"
# Removed Option "SLI" "off"
# Removed Option "BaseMosaic" "on"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "DFP-0"
Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "nvidia-auto-select +0+0"
# Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "nvidia-auto-select +0+0"
Option "SLI" "Off"
Option "MultiGPU" "Off"
Option "BaseMosaic" "off"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Aquí está mi antiguo xorg.conf 'trabajando en 12.04'
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 310.19 ([email protected]) Thu Nov 8 02:08:55 PST 2012
Section "ServerLayout"
# Removed Option "Xinerama" "0"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen2"
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 1907FP"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: unknown, VertRefresh source: unknown
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DELL 1907FP"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Apple Cinema HD"
HorizSync 74.0 - 74.6
VertRefresh 59.9 - 60.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 580"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 520"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 580"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1280+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0 {viewportout=1280x720+0+152}"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "Stereo" "0"
Option "metamodes" "DFP-2: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
salida de xrandr después de eliminar xorg.conf y reiniciar
Screen 0: minimum 8 x 8, current 3200 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0
1152x864 75.0
1024x768 75.0 60.0
800x600 75.0 60.3
640x480 75.0 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected 1920x1200+1280+0 (normal left inverted right x axis y axis) 495mm x 310mm
1920x1200 60.0*+ 59.9
Respuesta1
Tengo la misma configuración con 3 monitores. Una máquina tiene 2 tarjetas gráficas y 3 monitores. La otra 1 gráfica y 3 monitores.
En ambas máquinas tuve que configurar cada monitor para que tuviera su propio xserver.
Para configurarlo, inicio la configuración del servidor NVidia X (nvidia-settings). Vaya a Configuración de pantalla del servidor X. En el cuadro desplegable Configuración: agregue un xserver para cada monitor. Habilite también la casilla de verificación Xinerama. Organiza el monitor según las necesidades.
Haga clic en Guardar en configuración X y guárdelo en el archivo /etc/X11/xorg.conf.
Ahora tendrás que reiniciar o reiniciar el administrador de pantalla.
Algunas veces (no muy a menudo) tengo problemas con el restablecimiento de la configuración, pero luego hago lo anterior nuevamente.
Con esta configuración, algunas de las herramientas de configuración de pantalla estándar, como seleccionar el protector de pantalla, etc.
Espero que esto ayude...