- Tengo un enrutador, una computadora portátil con Ubuntu (mi computadora portátil), una computadora portátil Win10 (la de mi hermano), un iPhone. Todos los dispositivos se están conectando al Wi-Fi del enrutador.
- ¡La velocidad normal es de 16 a 20 mbps!
- Cuando usaba Win 10 como mi hermano antes, todo estaba bien
- Ahora estoy usando Ubuntu y cuando la computadora portátil Ubuntu esapagadoodesconectadoDesde Wi-Fi, la velocidad en otros dispositivos se reduce de 16-20 Mbps a 0,8 Mbps. Cuando Ubuntu esencendidootra vez oconectadoa Wi-Fi, la velocidad vuelve a ser normal (16-20 mbps). Si apaga la computadora portátil win10, no hay problema con la velocidad.
Intenté usar otro enrutador, pero fue lo mismo. ¿Cuál es el problema?¿POR QUÉ Ubuntu-laptop está afectando la velocidad wifi del enrutador?
Actualizar
Actualización 2:
Actualización 3 para David:
########## wireless info START ##########
Report from: 19 May 2016 14:38 SAMT +0400
Booted last: 19 May 2016 13:09 SAMT +0400
Script from: 27 Sep 2015 00:34 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 14.04.4 LTS
Release: 14.04
Codename: trusty
##### kernel ############################
Linux 3.13.0-86-generic #131-Ubuntu SMP Thu May 12 23:33:13 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Ubuntu
##### lspci #############################
03:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
Kernel driver in use: ath9k
05:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1905]
Kernel driver in use: jme
##### lsusb #############################
Bus 002 Device 003: ID 25a7:2433
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 13d3:5130 IMC Networks Integrated Webcam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: asus-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
1: asus-wimax: WiMAX
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
##### lsmod #############################
ath9k 164164 0
ath9k_common 13551 1 ath9k
ath9k_hw 453856 2 ath9k_common,ath9k
ath 28698 3 ath9k_common,ath9k,ath9k_hw
mac80211 638915 1 ath9k
cfg80211 496328 3 ath,ath9k,mac80211
##### interfaces ########################
auto lo
iface lo inet loopback
##### ifconfig ##########################
eth0 Link encap:Ethernet HWaddr <MAC 'eth0' [IF]>
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:50
wlan0 Link encap:Ethernet HWaddr <MAC 'wlan0' [IF]>
inet addr:192.168.0.65 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::<IP6 'wlan0' [IF]>/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:248779 errors:0 dropped:0 overruns:0 frame:0
TX packets:156344 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:346924202 (346.9 MB) TX bytes:14768748 (14.7 MB)
##### iwconfig ##########################
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"UM-225"
Mode:Managed Frequency:2.472 GHz Access Point: <MAC 'UM-225' [AC1]>
Bit Rate=58.5 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=70/70 Signal level=-40 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:57 Missed beacon:0
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0
##### resolv.conf #######################
nameserver 127.0.1.1
search Dlink
##### network managers ##################
Installed:
NetworkManager
Running:
root 825 1 0 13:09 ? 00:00:03 NetworkManager
##### NetworkManager info ###############
NetworkManager Tool
State: connected (global)
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: jme
State: unavailable
Default: no
HW Address: <MAC 'eth0' [IF]>
Capabilities:
Carrier Detect: yes
Wired Properties
Carrier: off
- Device: wlan0 [UM-225 1] ----------------------------------------------------
Type: 802.11 WiFi
Driver: ath9k
State: connected
Default: yes
HW Address: <MAC 'wlan0' [IF]>
Capabilities:
Speed: 58 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
Explay: Infra, <MAC 'Explay' [AC13]>, Freq 2457 MHz, Rate 54 Mb/s, Strength 54 WPA
ASUS: Infra, <MAC 'ASUS' [AN2]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 62 WPA2
325: Infra, <MAC '325' [AC10]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 49 WPA WPA2
wtrende: Infra, <MAC 'wtrende' [AC4]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 49 WPA WPA2
Ultramarin_230: Infra, <MAC 'Ultramarin_230' [AC8]>, Freq 2472 MHz, Rate 54 Mb/s, Strength 39 WPA2
Genius: Infra, <MAC 'Genius' [AN6]>, Freq 2417 MHz, Rate 54 Mb/s, Strength 45 WPA2
TP-LINK_327: Infra, <MAC 'TP-LINK_327' [AC3]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 39 WPA WPA2
TP-LINK222: Infra, <MAC 'TP-LINK222' [AC9]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 62 WPA WPA2
nastya: Infra, <MAC 'nastya' [AC6]>, Freq 2472 MHz, Rate 54 Mb/s, Strength 75 WPA2
DIR-429: Infra, <MAC 'DIR-429' [AC7]>, Freq 2472 MHz, Rate 54 Mb/s, Strength 29 WPA2
TTK: Infra, <MAC 'TTK' [AN11]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 29 WPA WPA2
TAM HET I/IHTEPHETA: Infra, <MAC 'TAM HET I/IHTEPHETA' [AC15]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 39 WPA WPA2
115: Infra, <MAC '115' [AC14]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA WPA2
TTK-427: Infra, <MAC 'TTK-427' [AC12]>, Freq 2457 MHz, Rate 54 Mb/s, Strength 42 WPA WPA2
TTK-211: Infra, <MAC 'TTK-211' [AN15]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2
ustu: Infra, <MAC 'ustu' [AN16]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 32 WPA WPA2 Enterprise
TTK-423: Infra, <MAC 'TTK-423' [AN17]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 47 WPA WPA2
TP-LINK-525: Infra, <MAC 'TP-LINK-525' [AC11]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2
ustu_open: Infra, <MAC 'ustu_open' [AN19]>, Freq 2412 MHz, Rate 54 Mb/s, Strength 37
Vlaf777: Infra, <MAC 'Vlaf777' [AN20]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 27 WPA2
Phenomen: Infra, <MAC 'Phenomen' [AC5]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 WPA2
Suck my dick per wi-fi: Infra, <MAC 'Suck my dick per wi-fi' [AN22]>, Freq 2452 MHz, Rate 54 Mb/s, Strength 15 WPA2
TTK-207: Infra, <MAC 'TTK-207' [AN23]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 32 WPA2
RTRouter-036281: Infra, <MAC 'RTRouter-036281' [AN24]>, Freq 2417 MHz, Rate 54 Mb/s, Strength 34 WPA2
RTRouter-014050: Infra, <MAC 'RTRouter-014050' [AN25]>, Freq 2457 MHz, Rate 54 Mb/s, Strength 24 WPA2
*UM-225: Infra, <MAC 'UM-225' [AC1]>, Freq 2472 MHz, Rate 54 Mb/s, Strength 79 WPA2
Angry_Kot: Infra, <MAC 'Angry_Kot' [AN27]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 30 WPA WPA2
Rostelecom231: Infra, <MAC 'Rostelecom231' [AN28]>, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2
ryxxx: Infra, <MAC 'ryxxx' [AN29]>, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WPA2
IPv4 Settings:
Address: 192.168.0.65
Prefix: 24 (255.255.255.0)
Gateway: 192.168.0.1
DNS: 192.168.0.1
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
##### NetworkManager.conf ###############
[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq
no-auto-default=<MAC 'eth0' [IF]>,
[ifupdown]
managed=false
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/UM-225 1]] (600 root)
[connection] id=UM-225 1 | type=802-11-wireless
[802-11-wireless] ssid=UM-225 | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=ignore
[[/etc/NetworkManager/system-connections/TSARYOV]] (600 root)
[connection] id=TSARYOV | type=802-11-wireless
[802-11-wireless] ssid=TSARYOV | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Beeline_WiFi_FREE]] (600 root)
[connection] id=Beeline_WiFi_FREE | type=802-11-wireless
[802-11-wireless] ssid=Beeline_WiFi_FREE | mac-address=<MAC 'wlan0' [IF]>
[ipv6] method=auto
[ipv4] method=auto
[[/etc/NetworkManager/system-connections/Rostelecom231]] (600 root)
[connection] id=Rostelecom231 | type=802-11-wireless
[802-11-wireless] ssid=Rostelecom231 | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DIR-429]] (600 root)
[connection] id=DIR-429 | type=802-11-wireless
[802-11-wireless] ssid=DIR-429 | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/UM-225]] (600 root)
[connection] id=UM-225 | type=802-11-wireless
[802-11-wireless] ssid=UM-225 | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ustu_open]] (600 root)
[connection] id=ustu_open | type=802-11-wireless
[802-11-wireless] ssid=ustu_open | mac-address=<MAC 'wlan0' [IF]>
[ipv6] method=auto
[ipv4] method=auto
[[/etc/NetworkManager/system-connections/DIR-300]] (600 root)
[connection] id=DIR-300 | type=802-11-wireless
[802-11-wireless] ssid=DIR-300 | mac-address=<MAC 'wlan0' [IF]>
[ipv4] method=auto
[ipv6] method=auto
##### iw reg get ########################
Region: Europe/Samara (based on set time zone)
country 00:
(2402 - 2472 @ 40), (3, 20)
(2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS
##### iwlist channels ###################
eth0 no frequency information.
lo no frequency information.
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency:2.472 GHz (Channel 13)
##### iwlist scan #######################
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
Channel occupancy:
4 APs on Frequency:2.412 GHz (Channel 1)
3 APs on Frequency:2.437 GHz (Channel 6)
2 APs on Frequency:2.457 GHz (Channel 10)
2 APs on Frequency:2.462 GHz (Channel 11)
4 APs on Frequency:2.472 GHz (Channel 13)
wlan0 Scan completed :
Cell 01 - Address: <MAC 'UM-225' [AC1]>
Channel:13
Frequency:2.472 GHz (Channel 13)
Quality=68/70 Signal level=-42 dBm
Encryption key:on
ESSID:"UM-225"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000000d16efc86f
Extra: Last beacon: 48ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC '
Actualización: el enrutador es DLink DIR-300
SOLUCIÓN
Bueno, el problema, aparentemente, es configurar el modo inalámbrico. Se instaló B/G/N mixto. Si configura el modo G, el problema no ocurre.
B/G/N mezclado: la velocidad es normal, pero el problema persiste.
B - la velocidad es siempre baja.
G: la velocidad siempre es normal, no hay ningún problema con Ubuntu.
N: la velocidad es normal, pero el problema persiste.
Respuesta1
Para que quede claro esto, algunos puntos:
- La computadora portátil Ubuntu ejecutaba anteriormente Windows
- La velocidad de la red vaarribacuando tienes Ubuntu en la mezcla. Saque la computadora portátil Ubuntu y la velocidad disminuirá.
Lo que comprobaría:
- El modelo del enrutador (actualice su pregunta, por favor).
- Si existe alguna reserva de dirección. He visto que en algunos enrutadores, si hay una reserva para una tarjeta que se anuncia como, digamos, 11g, ese es el máximo paratodootros dispositivos (también conocido como modo mixto). En este caso, lo que podría estar sucediendo (sólo una suposición) es que el enrutador tiene conocimiento de MAC xxxxxx en 11g, pero cuando realmente se conecta, informa como n, por lo que el enrutador aumenta la velocidad porque ahora todos los dispositivos activos están en n velocidad. Cuando se desconecta, el enrutador vuelve a sus valores guardados.
- Busque una configuración en el enrutador que lo fuerce a la máxima velocidad posible (G/N/lo que sea) y vea si eso ayuda.
- Si nada más funciona, ¿has intentado reconfigurar el enrutador?
Nuevamente, podría resultar útil publicar el modelo del enrutador.
Respuesta2
La razón por la que esto sucede y no fue con Windows es porque en Windows tienes que habilitar el modo 802.11n manualmente, en Ubuntu lo habilitará automáticamente en la conexión si se negocia automáticamente con el enrutador. Si autonegocia una conexión N, esto tendrá un impacto en otras conexiones en un entorno mixto.802.11n - Wikipedia
Es por eso que no ves el problema cuando tienes el enrutador configurado en G.
Puede seguir la guía a continuación para obtener más información, pero para probarlo rápidamente y ver si es el problema en cuestión, puede deshabilitar 802.11n en Ubuntu, reiniciar su enrutador, luego reiniciar o apagar Ubuntu para ver si todavía interfiere con el otras conexiones.
sudo sh -c 'modprobe -r iwlwifi && modprobe iwlwifi 11n_disable=1'
Desactivar 802.11n permanentemente
La otra opción es que si su Windows u otros dispositivos admiten N, puede habilitarlo en esos dispositivos y configurar el enrutador en N para que todos estén en las mismas bandas sin problemas de compatibilidad con versiones anteriores.
Respuesta3
Hace poco vi un hilo en otro foro con el mismo problema. La persona tenía uno o más dispositivos Ethernet conectados a un protector contra sobretensiones. Quitar el protector contra sobretensiones de la cadena le solucionó el problema.