%20utilizado%20por%20ifup(8)%20e%20ifdown(8).png)
He comprado un dongle USB inalámbrico dlink dwa-131. Pero no puedo mencionarlo. Leí en la lista de hardware compatible que esto es plug and play en Ubuntu.
yo vi elprocedimiento de solución de problemas inalámbricosy obtuve los registros. He pegado debajo del registro. También veo dlink listado en lsusb. Pero no se ve en el registro siguiente. El chipset Intel pro integrado no funciona. Por eso traje este dongle.
No pude pegar el registro porque hubo un error que indica que necesito 10 reputación para publicar más de 2 enlaces. Por eso eliminé los enlaces del registro.
W: Some index files failed to download. They have been ignored, or old ones used instead.
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package hwinfo
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:10:00.0
logical name: wlan0
version: 02
serial: 00:1f:3c:a0:c6:69
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-32-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11abg
resources: irq:42 memory:f0000000-f0000fff
*-network
description: Ethernet interface
product: 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 01
serial: 00:1e:ec:a1:d5:f0
size: 10Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s
resources: irq:20 memory:f0101000-f0101fff ioport:2000(size=64)
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
wlan0 Interface doesn't support scanning : Network is down
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Archivo de interfaces(5) utilizado por ifup(8) e ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=14.04
DISTRIB_CODENAME=trusty
DISTRIB_DESCRIPTION="Ubuntu 14.04.1 LTS"
02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:30d5]
Kernel driver in use: e100
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:135b]
Kernel driver in use: iwl3945
Bus 001 Device 002: ID 2001:330d D-Link Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running disconnected disabled disabled enabled disabled
Ruta H/W Dispositivo Clase Descripción
system HP 520 Notebook PC (FH562AA#UUF)
/0 bus 30D5
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Core(TM) Duo CPU T2700 @ 2.33GHz
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 2MiB L2 cache
/0/4/0.1 processor Logical CPU
/0/4/0.2 processor Logical CPU
/0/a memory 3GiB System Memory
/0/a/0 memory 1GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/a/1 memory 2GiB SODIMM DDR2 Synchronous 667 MHz (1.5 ns)
/0/100 bridge Mobile 945GSE Express Memory Controller Hub
/0/100/2 display Mobile 945GSE Express Integrated Graphics Controller
/0/100/2.1 display Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
/0/100/1b multimedia NM10/ICH7 Family High Definition Audio Controller
/0/100/1c bridge NM10/ICH7 Family PCI Express Port 1
/0/100/1c.1 bridge NM10/ICH7 Family PCI Express Port 2
/0/100/1c.1/0 wlan0 network PRO/Wireless 3945ABG [Golan] Network Connection
/0/100/1d bus NM10/ICH7 Family USB UHCI Controller #1
/0/100/1d.7 bus NM10/ICH7 Family USB2 EHCI Controller
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/6 bridge CB1410 Cardbus Controller
/0/100/1e/8 eth0 network 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
/0/100/1f bridge 82801GBM (ICH7-M) LPC Interface Bridge
/0/100/1f.2 storage 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode]
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 500GB TOSHIBA MQ01ABD0
/0/1/0.0.0/1 /dev/sda1 volume 55GiB Windows NTFS volume
/0/1/0.0.0/2 /dev/sda2 volume 410GiB Extended partition
/0/1/0.0.0/2/5 /dev/sda5 volume 195GiB HPFS/NTFS partition
/0/1/0.0.0/2/6 /dev/sda6 volume 172GiB HPFS/NTFS partition
/0/1/0.0.0/2/7 /dev/sda7 volume 3060MiB Linux swap / Solaris partition
/0/1/0.0.0/2/8 /dev/sda8 volume 39GiB Linux filesystem partition
/0/2 scsi1 storage
/0/2/0.0.0 /dev/cdrom disk DVDRAM GSA-T20N
Linux prasanna 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux
[ 0.000000] DMI: Hewlett-Packard HP 520 Notebook PC/30D5, BIOS 68MVU Ver. F.07 03/18/2008
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.124777] ACPI: No dock devices found.
[ 0.125240] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.125278] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.160686] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.166459] Found 1 acpi root devices
[ 0.166601] usbcore: registered new interface driver usbfs
[ 0.166601] usbcore: registered new interface driver hub
[ 0.166601] usbcore: registered new device driver usb
[ 0.170087] Switched to clocksource hpet
[ 0.179321] pnp: PnP ACPI: found 11 devices
[ 0.218302] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.668099] Console: switching to colour frame buffer device 128x48
[ 0.696460] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.696494] ACPI: Lid Switch [C20C]
[ 0.808119] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.808122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808125] usb usb1: Product: EHCI Host Controller
[ 0.808128] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 0.808130] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.808257] hub 1-0:1.0: USB hub found
[ 0.808932] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.808935] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.808938] usb usb2: Product: UHCI Host Controller
[ 0.808940] usb usb2: Manufacturer: Linux 3.13.0-32-generic uhci_hcd
[ 0.808943] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.809057] hub 2-0:1.0: USB hub found
[ 0.817703] Loaded X.509 cert 'Magrathea: Glacier signing key: a7fc6590fc4a8d859aaebda2ca5dd04716244fa0'
[ 0.885012] IMA: No TPM chip found, activating TPM-bypass!
[ 0.886064] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.097279] isapnp: No Plug & Play device found
[ 1.120094] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.261678] usb 1-2: New USB device found, idVendor=2001, idProduct=330d
[ 1.261683] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.261686] usb 1-2: Product: 802.11n WLAN Adapter
[ 1.261689] usb 1-2: Manufacturer: Realtek
[ 1.261691] usb 1-2: SerialNumber: 00e04c000001
[ 1.264957] e100 0000:02:08.0 eth0: addr 0xf0101000, irq 20, MAC addr 00:1e:ec:a1:d5:f0
[ 9.280791] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.595991] [Firmware Bug]: _BCQ is used instead of _BQC
[ 9.596042] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 9.606285] lp: driver loaded but no devices found
[ 9.669604] Console: switching to colour dummy device 80x25
[ 9.676143] cfg80211: Calling CRDA to update world regulatory domain
[ 9.781350] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 9.781356] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 9.787063] iwl3945 0000:10:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.853481] iwl3945 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 9.853487] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 9.853563] iwl3945 0000:10:00.0: irq 42 for MSI/MSI-X
[ 9.863209] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30d5]
[ 9.877750] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.971759] usbcore: registered new interface driver rtl8192cu
[ 10.436116] Console: switching to colour frame buffer device 160x50
[ 10.440962] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 10.448407] leds_ss4200: no LED devices found
[ 10.844713] cfg80211: World regulatory domain updated:
[ 10.844720] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.844722] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.844725] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.844727] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.844729] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.844731] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.901287] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 14.606592] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.626272] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.627509] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.248165] type=1400 audit(1418673050.858:48): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=745 comm="apparmor_parser"
[ 15.248956] type=1400 audit(1418673050.858:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=745 comm="apparmor_parser"
[ 15.249291] type=1400 audit(1418673050.858:51): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=745 comm="apparmor_parser"
Release Date: 03/18/2008
Serial services are supported (int 14h)
Manufacturer: Hewlett-Packard
Product Name: HP 520 Notebook PC
Serial Number: CND8374QLD
Manufacturer: Hewlett-Packard
Product Name: 30D5
Serial Number: Not Specified
Manufacturer: Hewlett-Packard
Serial Number: CND8374QLD
Manufacturer: Intel(R)
Serial Number: Not Specified
Manufacturer: CE00000000000000
Serial Number: 303EDB82
Manufacturer: 7F98000000000000
Serial Number: 7A15580F
wlan0 IEEE 802.11abg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=off
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
lo no wireless extensions.
eth0 no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist acer-wmi
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
sudo: hwinfo: command not found
root 669 0.0 0.3 54488 10208 ? Ssl 01:20 0:00 NetworkManager
prasanna 2277 0.0 0.0 4432 768 pts/2 S+ 01:26 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
total 28428
2097153 drwxr-xr-x 3 root root 4096 Dec 8 06:23 .
2 drwxr-xr-x 22 root root 4096 Dec 8 06:21 ..
2097156 -rw-r--r-- 1 root root 1166929 Jul 15 10:36 abi-3.13.0-32-generic
2097157 -rw-r--r-- 1 root root 169732 Jul 15 10:36 config-3.13.0-32-generic
2097154 drwxr-xr-x 5 root root 4096 Dec 8 06:22 grub
2097173 -rw-r--r-- 1 root root 18701723 Dec 8 06:23 initrd.img-3.13.0-32-generic
2097158 -rw-r--r-- 1 root root 176500 Mar 12 2014 memtest86+.bin
2097159 -rw-r--r-- 1 root root 178176 Mar 12 2014 memtest86+.elf
2097160 -rw-r--r-- 1 root root 178680 Mar 12 2014 memtest86+_multiboot.bin
2097155 -rw------- 1 root root 2693057 Jul 15 10:36 System.map-3.13.0-32-generic
2109674 -rw-r--r-- 1 root root 5820336 Jul 23 03:54 vmlinuz-3.13.0-32-generic
Support status summary of 'prasanna':
You have 1693 packages (100.0%) that can not/no-longer be downloaded
You have 0 packages (0.0%) that are unsupported
Run with --show-unsupported, --show-supported or --show-all to see more details
--2014-12-16 01:26:28-- http://www.linux-usb.org/usb.ids
Resolving www.linux-usb.org (www.linux-usb.org)... failed: Name or service not known.
wget: unable to resolve host address ‘www.linux-usb.org’
update-usbids: download failed
Module Size Used by
bnep 18895 2
rfcomm 53664 0
bluetooth 342206 10 bnep,rfcomm
snd_hda_codec_conexant 47785 1
hp_wmi 13702 0
sparse_keymap 13708 1 hp_wmi
pcmcia 51828 0
parport_pc 31981 0
coretemp 13195 0
ppdev 17391 0
rtl8192cu 66675 0
kvm 388083 0
snd_hda_intel 42730 2
snd_hda_codec 164067 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 13272 1 snd_hda_codec
snd_pcm 85501 2 snd_hda_codec,snd_hda_intel
joydev 17101 0
arc4 12536 2
yenta_socket 40201 0
pcmcia_rsrc 18319 1 yenta_socket
rtl_usb 18072 1 rtl8192cu
serio_raw 13230 0
lpc_ich 16864 0
pcmcia_core 22328 3 pcmcia,pcmcia_rsrc,yenta_socket
iwl3945 63619 0
iwlegacy 88016 1 iwl3945
rtlwifi 52835 2 rtl_usb,rtl8192cu
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
rtl8192c_common 47340 1 rtl8192cu
snd_seq_midi 13132 0
mac80211 546051 5 iwl3945,iwlegacy,rtl_usb,rtlwifi,rtl8192cu
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25135 1 snd_seq_midi
snd_seq 55383 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 28584 2 snd_pcm,snd_seq
cfg80211 409394 4 iwl3945,iwlegacy,mac80211,rtlwifi
i915 705659 3
wmi 18673 1 hp_wmi
drm_kms_helper 47182 1 i915
snd 60871 14 snd_hwdep,snd_timer,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
video 18903 1 i915
lp 13299 0
parport 40836 3 lp,ppdev,parport_pc
mac_hid 13037 0
drm 244037 4 i915,drm_kms_helper
i2c_algo_bit 13197 1 i915
soundcore 12600 1 snd
psmouse 91329 0
e100 35945 0
mii 13654 1 e100
gracias a todos
Respuesta1
puedes leer estoartículoy prueba:
sudo modprobe rtl8192cu swenc=1
echo "2001 330D" | sudo tee /sys/bus/usb/drivers/rtl8192cu/new_id
Respuesta2
Mi dongle Wifi D-link tiene las siguientes especificaciones:
- Adaptador nano USB inalámbrico N300 de D-Link
- Número de modelo: DWA-131
- Versión hardware: E1
- Versión F/W: 5.00
Esto es lo que hice, después de estar buscando en Internet durante mucho tiempo:
1) Ir ahttp://support.dlink.com.au/Download/download.aspx?product=DWA-131y descargue el archivo "DWA-131 Linux driver v4.3.1.1.zip (5,88 MB)" en la sección "REV E" (en la parte superior de la página). 2) Mueva el archivo a un directorio de su elección, extráigalo y cámbielo al directorio que acaba de extraer. Este es (en el directorio que elegiste):
- tar -zxvf 20140812_rtl8192EU_linux_v4.3.1.1_11320.tar.gz
- disco compacto 20140812_rtl8192EU_linux_v4.3.1.1_11320/
3) Ingrese los siguientes comandos:
- hacer
- su (se solicitará su contraseña)
- hacer instalar
Ni siquiera necesitas reiniciar tu computadora. En mi caso funcionó al instante.
Espero que encuentre esta información útil.
Respuesta3
http://h18000.www1.hp.com/products/quickspecs/archives_Division/12721_div_v1/12721_div.HTML
¿Has intentado presionar el botón a la izquierda del botón de encendido para ver si habilita wifi? Es el número 2 en la imagen. Si funciona según lo diseñado, al menos debería alternar el bloque duro enrfkill list all