최근에 Ubuntu를 설치했는데 부팅할 때마다 다음이 표시됩니다.
/dev/sda2: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda2 requires a manual fsck
수동으로 실행한 후 fsckUbuntu는 정상적으로 부팅되지만 부팅 후 시스템의 모든 폴더에 잠금 아이콘이 표시되고 앱이 실행되지 않습니다. 또한 웹 브라우저에 문제가 생기기 시작했습니다.Firefox is already running, but is not responding
여기에 무엇이 문제인지 잘 모르겠습니다. 수동으로 실행하고 부팅했습니다 fsck.
결과 sudo smartctl -a /dev/sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AAKX-001CA0
Serial Number: WD-WMAYUA594803
LU WWN Device Id: 5 0014ee 0586a1865
Firmware Version: 15.01H15
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat May 13 13:39:32 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8580) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5736
3 Spin_Up_Time 0x0027 144 143 021 Pre-fail Always - 3800
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1690
5 Reallocated_Sector_Ct 0x0033 194 194 140 Pre-fail Always - 116
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10733
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1665
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 141
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1548
194 Temperature_Celsius 0x0022 103 094 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 110 110 000 Old_age Always - 90
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 10
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 188
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
하고 있었을 때부터fsck /dev/sda2
결과 sudo smartctl -a /dev/sda2:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AAKX-001CA0
Serial Number: WD-WMAYUA594803
LU WWN Device Id: 5 0014ee 0586a1865
Firmware Version: 15.01H15
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat May 13 13:46:14 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 8580) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 87) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5736
3 Spin_Up_Time 0x0027 144 143 021 Pre-fail Always - 3800
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1690
5 Reallocated_Sector_Ct 0x0033 194 194 140 Pre-fail Always - 116
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10733
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1665
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 141
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1548
194 Temperature_Celsius 0x0022 102 094 000 Old_age Always - 41
196 Reallocated_Event_Count 0x0032 110 110 000 Old_age Always - 90
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 10
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 188
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY에러 메시지:
라이브 USB에서 fsck를 실행한 결과:
ubuntu@ubuntu:~$ sudo fsck /dev/sda2
fsck from util-linux 2.27.1
e2fsck 1.42.13 (17-May-2015)
/dev/sda2 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Inodes that were part of a corrupted orphan linked list found. Fix<y>? yes
Inode 1060186 was part of the orphaned inode list. FIXED.
Inode 1060191 was part of the orphaned inode list. FIXED.
Inode 1060193 was part of the orphaned inode list. FIXED.
Inode 1060200 was part of the orphaned inode list. FIXED.
Deleted inode 1060223 has zero dtime. Fix<y>? yes
Pass 2: Checking directory structure
Error reading block 4202608 (Attempt to read block from filesystem resulted in short read) while reading directory block. Ignore error<y>? yes
Force rewrite<y>? yes
Directory inode 1048767, block #0, offset 0: directory corrupted
Salvage<y>? yes
Missing '.' in directory inode 1048767.
Fix<y>? yes
Setting filetype for entry '.' in ??? (1048767) to 2.
Missing '..' in directory inode 1048767.
Fix<y>? yes
Setting filetype for entry '..' in ??? (1048767) to 2.
Pass 3: Checking directory connectivity
'..' in /home/faisal/.cache/logrotate (1048767) is <The NULL inode> (0), should be /home/faisal/.cache (1048583).
Fix<y>? yes
Pass 4: Checking reference counts
Inode 2 ref count is 23, should be 24. Fix<y>? yes
Inode 1048583 ref count is 19, should be 18. Fix<y>? yes
Unattached inode 1060211
Connect to /lost+found<y>? yes
Inode 1060211 ref count is 2, should be 1. Fix<y>? yes
Pass 5: Checking group summary information
Block bitmap differences: -(79757831--79757834) -(79757837--79757840) -(85494803--85494806) -(85524993--85525000)
Fix<y>? yes
Free blocks count wrong for group #2434 (21451, counted=21459).
Fix<y>? yes
Free blocks count wrong for group #2609 (6147, counted=6151).
Fix<y>? yes
Free blocks count wrong for group #2610 (29311, counted=29319).
Fix<y>? yes
Free blocks count wrong (105800045, counted=105799995).
Fix<y>? yes
Inode bitmap differences: -1060186 -1060191 -1060193 -1060200 -1060223
Fix<y>? yes
Free inodes count wrong for group #129 (4724, counted=4729).
Fix<y>? yes
Free inodes count wrong (28871737, counted=28871728).
Fix<y>? yes
/dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda2: 578512/29450240 files (0.4% non-contiguous), 11994565/117794560 blocks
답변1
fsck /dev/sda2
터미널에서 입력을 요청할 때마다 입력하고 Enter 키 를 누르세요.
이제 프로세스가 완료되면 다음을 입력하십시오.reboot
재부팅 후 터미널을 엽니다. 인터넷에 연결되어 있는지 확인하고 다음을 입력하세요.
sudo apt-get clean
sudo apt-get update
sudo apt-get updrade
이제부터 시스템이 정상적으로 시작됩니다.