케이블 이더넷 작동이 중지됨 Xubuntu 19.04

케이블 이더넷 작동이 중지됨 Xubuntu 19.04

오후 모두.

어제(10월 11일) 자정에 내 노트북의 이더넷 케이블을 통한 인터넷 연결이 끊어졌습니다. 아직 Wi-Fi로 연결할 수 있어요.

Xubuntu 19.04 및 Windows 10으로 듀얼 부팅되는 두 번째 노트북이 있습니다. 이 두 번째 노트북은 여전히 ​​Windows 10 및 Xubuntu 19.04 모두에서 이더넷에 연결할 수 있으므로 모뎀/라우터 문제가 아닙니다.

자동 eth0 설정을 삭제하고 재구성하여 이더넷을 복원했지만 이제 그것도 작동이 중지되었습니다(그리고 자동 eth0을 복원할 수 없습니다!).

누구든지 이 문제를 해결하는 데 도움을 줄 수 있습니까?


@heynnema: 요청하신 정보입니다.

dkms status
digimend, 8, 5.0.0-29-generic, x86_64: installed
digimend, 8, 5.0.0-31-generic, x86_64: installed
sudo lshw -C network
[sudo] password for bac: 
  *-network                 
       description: Ethernet interface
       product: RTL810xE PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:07:00.0
       logical name: enp7s0
       version: 07
       serial: b0:5a:da:c9:aa:2a
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical
       configuration: broadcast=yes driver=r8169 latency=0 multicast=yes
       resources: irq:18 ioport:4000(size=256) memory:b4000000-b4000fff memory:b4800000-b4803fff
  *-network
       description: Wireless interface
       product: Wireless 3165
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:0d:00.0
       logical name: wlp13s0
       version: 81
       serial: 94:65:9c:b9:9a:ba
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-31-generic firmware=29.1044073957.0 ip=192.168.1.114 latency=0 link=yes multicast=yes wireless=IEEE 802.11
       resources: irq:44 memory:b2000000-b2001fff
cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
cat /etc/netplan/*.yaml
cat: '/etc/netplan/*.yaml': No such file or directory

@heynnema: sudo lshw -C 네트워크에서 두 번째 실행:

  *-network
       description: Ethernet interface
       product: RTL810xE PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:07:00.0
       logical name: enp7s0
       version: 07
       serial: b0:5a:da:c9:aa:2a
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical
       configuration: broadcast=yes driver=r8169 latency=0 multicast=yes
       resources: irq:18 ioport:4000(size=256) memory:b4000000-b4000fff memory:b4800000-b4803fff
  *-network
       description: Wireless interface
       product: Wireless 3165
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:0d:00.0
       logical name: wlp13s0
       version: 81
       serial: 94:65:9c:b9:9a:ba
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-31-generic firmware=29.1044073957.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
       resources: irq:44 memory:b2000000-b2001fff

@heynnema: 세 번째 매력!

sudo lshw -C network
  *-network
       description: Ethernet interface
       product: RTL810xE PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:07:00.0
       logical name: enp7s0
       version: 07
       serial: b0:5a:da:c9:aa:2a
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical
       configuration: broadcast=yes driver=r8169 latency=0 multicast=yes
       resources: irq:18 ioport:4000(size=256) memory:b4000000-b4000fff memory:b4800000-b4803fff
  *-network
       description: Wireless interface
       product: Wireless 3165
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:0d:00.0
       logical name: wlp13s0
       version: 81
       serial: 94:65:9c:b9:9a:ba
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-31-generic firmware=29.1044073957.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
       resources: irq:43 memory:b2000000-b2001fff

하지만 여전히 자동 eth0은 없습니다. cat5 또는 cat6 케이블이 있는지 어떻게 알 수 있나요?

@heynnema: 이것이 마지막이기를 바랍니다.

sudo lshw -C network
  *-network
       description: Ethernet interface
       product: RTL810xE PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:07:00.0
       logical name: enp7s0
       version: 07
       serial: b0:5a:da:c9:aa:2a
       size: 100Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8106e-1_0.0.1 06/29/12 ip=192.168.1.195 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:18 ioport:4000(size=256) memory:b4000000-b4000fff memory:b4800000-b4803fff
  *-network DISABLED
       description: Wireless interface
       product: Wireless 3165
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:0d:00.0
       logical name: wlp13s0
       version: 81
       serial: 94:65:9c:b9:9a:ba
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-31-generic firmware=29.1044073957.0 latency=0 link=no multicast=yes wireless=IEEE 802.11
       resources: irq:43 memory:b2000000-b2001fff

답변1

댓글 중에서...

명령을 사용하여 오랜 시간 문제를 해결한 후에 sudo lshw -C network컴퓨터에 케이블이 연결되지 않았거나 케이블에 결함이 있거나(사용자가 Cat 5e 또는 Cat 6 케이블을 사용하지 않았음) 스위치/허브/라우터/모뎀이 연결되지 않은 것으로 나타났습니다. .

컴퓨터가 실제로 eth0 장치가 아닌 enp7s0 이더넷 장치를 인식한 것으로 확인되었습니다. enp7s0을 사용하여 새로운 NetworkManager GUI 연결 스크립트를 생성하고 커널 -29, -30 및 -31로 테스트하면 모든 것이 다시 작동하는 것 같습니다. eth0을 사용하는 이전 연결 스크립트가 삭제되었습니다.

다시 실패하면 Ubuntu Live DVD/USB로 부팅하고 이더넷 네트워크 인터페이스를 다시 테스트해야 합니다.

관련 정보