☰

내 USB 장치에 대한 정보 얻기

tag-icon • tag-icon usb
내 USB 장치에 대한 정보 얻기

/proc/bus/usb/devices 형식으로 USB 장치에 대한 많은 정보가 있었습니다.

그런 다음 이것은 더 이상 자동 마운트되지 않았으므로 직접 마운트해야 했습니다(usbdevfs라고 불렸습니다).

이제 11.04에서는 그것도 작동하지 않습니다. 지금 내 장치에 대한 정보를 어떻게 얻을 수 있나요?

답변1

lsusb이것을 보여줍니다 :

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. 
Bus 001 Device 003: ID 064e:c218 Suyin Corp.  
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

무엇을 더 알아야 합니까?

더 필요하면 거기 usbview에 있습니다소스포지: USBView는 Linux 시스템의 USB 버스에 연결된 장치의 지형을 표시하는 GTK 프로그램입니다. 또한 각 장치에 대한 정보도 표시됩니다. 이는 장치가 제대로 작동하는지 여부를 확인하는 데 유용할 수 있습니다.

여기에 이미지 설명을 입력하세요

11.04 btw에서 usbview를 시도하지 않았습니다.

답변2

/proc더 이상 사용되지 않는 것이 /sys/bus/usb/devices당신이 찾고 있는 것입니다. USB 장치를 쿼리하는 프로그램은 입니다 lsusb.

답변3

연결된 장치에 대한 USB 정보를 수집하기 위한 몇 가지 유용한 도구는 다음과 같습니다.

usb-devices:

이는 다음의 일부입니다.기본 패키지 usbutils18.04 LTS에. 표본 출력:

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=04.15
S:  Manufacturer=Linux 4.15.0-1050-oem xhci-hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:00:14.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0781 ProdID=5571 Rev=01.00
S:  Manufacturer=SanDisk'
S:  Product=Cruzer Fit
S:  SerialNumber=4C530000280331109123
C:  #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

.

udevadm monitor

udevadm의 일부입니다기본 패키지 udev18.04 LTS에.

이 명령을 실행하세요전에USB 장치를 연결합니다.

아래의 표본 출력에서는 USB 플래시 드라이브가 어떤 블록 장치로 로드되었는지 알려줍니다.

udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[969.010067] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
KERNEL[969.010367] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
KERNEL[969.018769] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0 (scsi)
KERNEL[969.018849] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/scsi_host/host0 (scsi_host)
KERNEL[969.018934] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
KERNEL[969.019049] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV  [969.024995] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
UDEV  [969.031390] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV  [969.036362] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0 (scsi)
UDEV  [969.041258] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/scsi_host/host0 (scsi_host)
UDEV  [969.046202] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0 (usb)
UDEV  [969.051734] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1 (usb)
KERNEL[970.051706] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0 (scsi)
KERNEL[970.052068] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 (scsi)
KERNEL[970.052215] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0 (scsi_disk)
KERNEL[970.052435] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 (scsi)
KERNEL[970.052585] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0 (scsi_device)
KERNEL[970.052774] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0 (scsi_generic)
KERNEL[970.052963] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0 (bsg)
UDEV  [970.060833] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0 (scsi)
KERNEL[970.061634] add      /devices/virtual/bdi/8:0 (bdi)
UDEV  [970.069006] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 (scsi)
UDEV  [970.071467] add      /devices/virtual/bdi/8:0 (bdi)
UDEV  [970.075852] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0 (scsi_disk)
KERNEL[970.079839] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/block/sda (block)
KERNEL[970.079989] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/block/sda/sda1 (block)
UDEV  [970.083556] bind     /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 (scsi)
UDEV  [970.091288] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0 (scsi_device)
UDEV  [970.091755] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0 (scsi_generic)
UDEV  [970.106807] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0 (bsg)
UDEV  [970.339976] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/block/sda (block)
UDEV  [970.519549] add      /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/block/sda/sda1 (block)

관련 정보