
Ubuntu 13.10을 실행 중이고 Sharkoon USB 3.0 PCI-E x1 컨트롤러가 있지만 작동할 수 없습니다.
나는 lspci -v
컨트롤러를 시도하고 볼 수 있습니다. 지금은 무엇입니까?
$ lspci -v
02:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
Flags: fast devsel, IRQ 16
Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
편집: USB 스틱이 연결된 lsusb. Western Digital Technologies Passport는 온보드 USB 2.0에 연결되고 MLK Trust Deskset은 마우스 및 키보드와 무선으로 연결됩니다.
$ lsusb
Bus 002 Device 002: ID 1058:0704 Western Digital Technologies, Inc. Passport External HDD
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device MLK Trust Deskset001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 017c:145f MLK Trust Deskset
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
편집: dmesg를 확인했습니다.
$ dmesg | grep xhci
[ 0.586087] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.586093] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 24.714828] xhci_hcd 0000:02:00.0: can't setup
[ 24.714832] xhci_hcd 0000:02:00.0: USB bus 9 deregistered
[ 24.714879] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -110
[ 24.714883] xhci_hcd: probe of 0000:02:00.0 failed with error -110
답변1
이 페이지에는 "Crone"의 WD Passport도 인식되지 않는다는 게시물이 있었습니다.
이는 하드웨어 문제일 수 있습니다. 제조업체의 최신 펌웨어를 확인하세요.
답변2
Renesas Technology Corp. uPD720202는 Linux에서 작동하지 않습니다.