Debian에서 Realtek ALC260 드라이버로 사운드가 재생되지 않는 이유는 무엇입니까?

Debian에서 Realtek ALC260 드라이버로 사운드가 재생되지 않는 이유는 무엇입니까?

나는 최근 GoBook XR-1 노트북에 Debian 8을 설치했습니다. Debian은 이를 Realtek ALC260 사운드 카드가 있는 것으로 감지합니다.

  • Windows를 설치할 때 사운드 카드가 제대로 작동했습니다.
  • 나는 이전에 Debian 7을 실행하는 동일한 노트북 모델을 가지고 있었고 다음 단계를 따른 후에 소리가 작동했습니다.아쿠분투. 이 단계는 Debian 8에서 실패하여 복구 모드에서 파일을 삭제할 때까지 Debian 8이 부팅되지 않았습니다.
  • 을 사용하여 소리를 음소거 해제했습니다 alsamixer.

    ┌──────────────────────── AlsaMixer v1.0.28 ────────────────────────┐
    │ Card: HDA Intel                           F1:  Help               │
    │ Chip: Realtek ALC260                      F2:  System information │
    │ View: F3:[Playback] F4: Capture  F5: All  F6:  Select sound card  │
    │ Item: Master [dB gain: -20.00]            Esc: Exit               │
    │    ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     ┌──┐     │
    │    │  │     │  │     │▒▒│     │  │     │  │     │  │     │  │     │
    │    │  │     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │  │     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │  │     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │  │     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │▒▒│     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │▒▒│     │  │     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │▒▒│     │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     →
    │    │▒▒│     │▒▒│     │▒▒│     │  │     │  │     │  │     │  │     │
    │    ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     ├──┤     │
    │    │OO│     │OO│     │OO│     │MM│     │MM│     │MM│     │MM│     │
    │    └──┘     └──┘     └──┘     └──┘     └──┘     └──┘     └──┘     │
    │     41       25    100<>100   1<>1     0<>0     0<>0     0<>0     │
    │ < Master >Speaker    PCM      Line      CD      Mic      Beep     │
    └───────────────────────────────────────────────────────────────────┘
    
  • 또한 .NET에서 HDA Intel/Realtek ALC260을 PulseAudio로 변경해 보았습니다 alsamixer.

    ┌──────────────────────── AlsaMixer v1.0.28 ────────────────────────┐
    │ Card: PulseAudio                          F1:  Help               │
    │ Chip: PulseAudio                          F2:  System information │
    │ View: F3:[Playback] F4: Capture  F5: All  F6:  Select sound card  │
    │ Item: Master                              Esc: Exit               │
    │                               ┌──┐                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               │▒▒│                                │
    │                               ├──┤                                │
    │                               │OO│                                │
    │                               └──┘                                │
    │                              97<>97                               │
    │                            < Master >                             │
    └───────────────────────────────────────────────────────────────────┘
    
  • FN 키에서 소리 음소거를 해제해 보았습니다.

  • 외부 스피커를 사용해보고, 사용하지 않고 사용해 보았습니다.
  • 로 MP3를 재생 mplayer한 다음 실행하면 pavucontrol막대에 pavucontrol사운드가 재생 중임을 나타냅니다. 에서 사운드를 음소거하면 alsamixer이 막대가 움직이지 않습니다.

출력 dmesg | grep snd:

[    9.499756] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X

출력 dmesg | grep sound:

[   10.029252] sound hdaudioC0D0: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0) type:line
[   10.029258] sound hdaudioC0D0:    speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   10.029262] sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.029265] sound hdaudioC0D0:    mono: mono_out=0x0
[   10.029268] sound hdaudioC0D0:    inputs:
[   10.029271] sound hdaudioC0D0:      Mic=0x12
[   10.029274] sound hdaudioC0D0:      Line=0x14
[   10.029277] sound hdaudioC0D0:      CD=0x16
[   10.094057] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input15

출력 sudo alsactl init:

Found hardware: "HDA-Intel" "Realtek ALC260" "HDA:10ec0260,02601635,00100400 HDA:10573055,10573055,00100700" "0x14ff" "0xa001"
Hardware is initialized using a generic method

출력 lspci -nn | grep Audio:

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)

업데이트

  • 로 PulseAudio를 끈 다음 오디오 카드로 pulseaudio --kill전환하면 테스트 중에도 작동하지 않습니다 .alsamixeraplay /usr/share/sounds/alsa/Noise.wav

출력 cat /proc/asound/card*/codec\#*:

Codec: Realtek ALC260
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0260
Subsystem Id: 0x02601635
Revision Id: 0x100400
No Modem Function Group found
Default PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D1 D2 D3
  Power: setting=D0, actual=D0
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
  IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
  IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
  Device: name="ALC260 Analog", type="Audio", device=0
  Converter: stream=5, channel=0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0xe]: 16 20 24
    formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x211: Stereo Digital
  Converter: stream=0, channel=0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x560]: 44100 48000 96000 192000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
Node 0x04 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC260 Analog", type="Audio", device=0
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals:  [0x0c 0x0c]
  Converter: stream=1, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 7
     0x12* 0x13 0x14 0x15 0x16 0x0f 0x10
Node 0x05 [Audio Input] wcaps 0x10011b: Stereo Amp-In
  Control: name="Capture Volume", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Capture Switch", index=1, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Device: name="ALC260 Alt Analog", type="Audio", device=2
  Amp-In caps: ofs=0x00, nsteps=0x23, stepsize=0x03, mute=1
  Amp-In vals:  [0x80 0x80]
  Converter: stream=0, channel=0
  SDI-Select: 0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x6]: 16 20
    formats [0x1]: PCM
  Connection: 8
     0x12* 0x13 0x14 0x15 0x16 0x07 0x0f 0x10
Node 0x06 [Audio Input] wcaps 0x100391: Stereo Digital
  Converter: stream=0, channel=0
  SDI-Select: 0
  Digital:
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x160]: 44100 48000 96000
    bits [0x1e]: 16 20 24 32
    formats [0x1]: PCM
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x19
Node 0x07 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
  Control: name="Mic Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Mic Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=0, ofs=0
  Control: name="Line Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="Line Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=2, ofs=0
  Control: name="CD Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="CD Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=4, ofs=0
  Control: name="Beep Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
  Control: name="Beep Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=In, idx=5, ofs=0
  Amp-In caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80] [0x33 0x33] [0x80 0x80] [0x00 0x00] [0x2d 0x2d] [0x80 0x80] [0x80 0x80]
  Connection: 8
     0x12 0x13 0x14 0x15 0x16 0x17 0x0f 0x10
Node 0x08 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Control: name="PCM Playback Volume", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x00 0x00]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x2f 0x2f]
  Connection: 2
     0x02 0x07
Node 0x09 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00 0x00] [0x80 0x80]
  Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
  Amp-Out vals:  [0x40 0x40]
  Connection: 2
     0x02 0x07
Node 0x0a [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out
  Control: name="Speaker Playback Volume", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-In vals:  [0x00] [0x00]
  Amp-Out caps: ofs=0x23, nsteps=0x41, stepsize=0x03, mute=0
  Amp-Out vals:  [0x2d]
  Connection: 2
     0x02 0x07
Node 0x0b [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x08* 0x09
Node 0x0c [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x08* 0x09
Node 0x0d [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x08* 0x09
Node 0x0e [Audio Selector] wcaps 0x300101: Stereo
  Connection: 2
     0x08* 0x09
Node 0x0f [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="PCM Playback Switch", index=0, device=0
    ControlAmp: chs=3, dir=Out, idx=0, ofs=0
  Control: name="Line Out Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0001003f: IN OUT HP EAPD Detect Trigger ImpSense
  EAPD 0x2: EAPD
  Pin Default 0x01014110: [Jack] Line Out at Ext Rear
    Conn = 1/8, Color = Green
    DefAssociation = 0x1, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0xc0: OUT HP
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x08
Node 0x10 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0001003f: IN OUT HP EAPD Detect Trigger ImpSense
  EAPD 0x2: EAPD
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x09
Node 0x11 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
  Control: name="Speaker Playback Switch", index=0, device=0
    ControlAmp: chs=1, dir=Out, idx=0, ofs=0
  Control: name="Speaker Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00]
  Pincap 0x00000010: OUT
  Pin Default 0x99030120: [Fixed] Line Out at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x40: OUT
  Connection: 1
     0x0a
Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Mic Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
  Pin Default 0x01a1993e: [Jack] Mic at Ext Rear
    Conn = 1/8, Color = Pink
    DefAssociation = 0x3, Sequence = 0xe
    Misc = NO_PRESENCE
  Pin-ctls: 0x21: IN VREF_50
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0b
Node 0x13 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0c
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Control: name="Line Phantom Jack", index=0, device=0
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
  Pin Default 0x01813130: [Jack] Line In at Ext Rear
    Conn = 1/8, Color = Blue
    DefAssociation = 0x3, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0d
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000133f: IN OUT HP Detect Trigger ImpSense
    Vref caps: HIZ 50 80
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x20: IN VREF_HIZ
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x0e
Node 0x16 [Pin Complex] wcaps 0x400001: Stereo
  Control: name="CD Phantom Jack", index=0, device=0
  Pincap 0x00000020: IN
  Pin Default 0x99330131: [Fixed] CD at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x1
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
Node 0x17 [Pin Complex] wcaps 0x400000: Mono
  Pincap 0x00000020: IN
  Pin Default 0x99830132: [Fixed] Line In at Int ATAPI
    Conn = ATAPI, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x2
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
Node 0x18 [Pin Complex] wcaps 0x400380: Mono Digital
  Pincap 0x00000014: OUT Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
  Connection: 1
     0x03
Node 0x19 [Pin Complex] wcaps 0x400280: Mono Digital
  Pincap 0x00000024: IN Detect
  Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
    Conn = 1/8, Color = Black
    DefAssociation = 0xf, Sequence = 0x0
    Misc = NO_PRESENCE
  Pin-ctls: 0x00:
  Unsolicited: tag=00, enabled=0
Node 0x1a [Vendor Defined Widget] wcaps 0xf00040: Mono
  Processing caps: benign=0, ncoeff=13
Node 0x1b [Volume Knob Widget] wcaps 0x600080: Mono
  Volume-Knob: delta=0, steps=64, direct=0, val=61
  Unsolicited: tag=00, enabled=0
  Connection: 0
Codec: Motorola Si3054
Address: 1
MFG Function Id: 0x2 (unsol 1)
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700
Modem Function Group: 0x1

출력 lspci -nn:

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 4 [8086:27d6] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 02)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge [8086:27bd] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] [8086:27c4] (rev 02)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV370/M22 [Mobility Radeon X300] [1002:5460]
02:00.0 Ethernet controller [0200]: LSI Corporation ET-131x PCI-E Ethernet Controller [11c1:ed00] (rev 03)
06:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
0b:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller [1217:7134] (rev 21)
0b:03.1 CardBus bridge [0607]: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller [1217:7134] (rev 21)
0b:03.4 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)

노트북에서 사운드가 작동하도록 하려면 어떻게 해야 합니까?

답변1

코덱 덤프에 대한 간략한 설명 /proc: Intel HDA 코덱은 노드가 있는 그래프로 표시됩니다. Connection현재 노드에 대한 입력을 나열합니다. 예를 들어, 오디오 출력 노드는 0x02믹서 노드로 들어가고 , 이는 후면의 잭 에 연결되어야 하는 0x08핀 콤플렉스 노드로 들어갑니다 .0x0fline out

그러나 라인 출력 잭, 라인 입력 잭 및 마이크 잭에는 올바르게 레이블이 지정되어 있지만 노드의 "내부 라인 출력 모노, ATAPI"는 0x11가짜인 것 같습니다. GoBook XR-1의 제품 설명에는 내부 스피커가 2개 있다고 나와 있습니다. , 그래서 나는 "라인 출력"이 아닌 "스피커"가 있고 "ATAPI"가 없는 스테레오를 기대합니다. 그럼에도 불구하고 이것은 스피커로 지정된 노드입니다. 그러나 아마도 잘못된 노드일 것입니다.

따라서 일종의 이상한 수정이 필요합니다(스피커/헤드폰을 일부 노드에 할당하는 데는 몇 가지 이상한 점이 있습니다). ALSA 개발자에게 버그를 신고하고 코덱 정보와 오디오 카드의 하위 시스템 공급업체/ID( lspci -s 00:1b.0 -v -nn)를 제공합니다.

hdajackretask용기가 있다면 (Debian 패키지 ) 를 가지고 놀면서 alsa-tools-gui실제 스피커 핀 노드를 찾을 수 있는지 확인할 수 있습니다. (이렇게 하면 올바른 컨트롤이 다시 할당될지 확신할 수 없으므로 핀을 변경한 후에 항상 코덱을 살펴보십시오.)

하지만 드라이버 와 함께 작동했다는 점은 흥미롭습니다. snd_hda_codec_realtek올바른 구성을 읽는 다른 방법이 있을 수도 있습니다.

관련 정보