다중 디스크 오디오북 세트를 리핑할 때 내 트랙에 예상대로 번호가 매겨지지 않습니다(과거 수십 개의 오디오북에서 작동했던 방식에 따르면).
내 파일 이름과 태그에 예상치 못한 트랙 번호가 나타나는 이유를 누군가가 알고 있다면 도움을 주시면 정말 감사하겠습니다.
와 같은 명령을 사용하고 있습니다.
abcde -c myAudiobookConfigFile.cfg -p -W 01
abcde -c myAudiobookConfigFile.cfg -p -W 02
abcde -c myAudiobookConfigFile.cfg -p -W ...
abcde -c myAudiobookConfigFile.cfg -p -W n
abcde에서 CDDB 항목을 편집하라는 메시지가 표시되면 해당 항목을 편집하고 Trakcs에 1-14의 번호를 지정합니다. 그러면 다음과 같은 파일 이름이 생성될 것으로 예상됩니다.
"Author - Album - Track 01.mp3"
"Author - Album - Track 02.mp3"
"Author - Album - Track 03.mp3"
하지만 내가 얻는 것은 다음과 같습니다 ...
"Author - Album - Track 64.mp3"
"Author - Album - Track 65.mp3"
"Author - Album - Track 66.mp3"
그리고 -W 02를 사용하여 디스크 2를 추출하면 아래와 같은 파일이 디스크의 파일 세트 내에서는 연속되지만 이전 디스크에서는 연속되지 않습니다.
"Author - Album - Track 99.mp3"
"Author - Album - Track 100.mp3"
"Author - Album - Track 101.mp3"
이것이 일부 인터넷 기반 메타데이터에서 발생한다고 가정하면(모든 로컬 .cddb* 폴더를 삭제했습니다) 구성 파일에서 cddb 및 태그 지정 작업을 비활성화했지만 도움이 되지 않았습니다.
내 .abcde.cfg 파일은 다음과 같습니다.
# -----------------$HOME/.abcde.conf----------------- #
#
# A sample configuration file to convert music cds to
# MP3 format using lame, eyeD3 and abcde version 2.7.2
#
# http://andrews-corner.org/linux/abcde/index.html
# -------------------------------------------------- #
# Control EYE3D
EYED3OPTS="--non-std-genres"
# Encode tracks immediately after reading. Saves disk space, gives
# better reading of 'scratchy' disks and better troubleshooting of
# encoding process but slows the operation of abcde quite a bit:
LOWDISK=y
# Specify the method to use to retrieve the track information,
# the alternative is to specify 'musicbrainz':
CDDBMETHOD=cddb
# Make a local cache of cddb entries and then volunteer to use
# these entries when and if they match the cd:
CDDBCOPYLOCAL="y"
CDDBLOCALDIR="$HOME/.cddb"
CDDBLOCALRECURSIVE="y"
CDDBUSELOCAL="y"
# Specify the encoder to use for MP3. In this case 'lame':
OGGENCODERSYNTAX=oggenc # Specify encoder for Ogg Vorbis
MP3ENCODERSYNTAX=lame # Specify encoder for MP3
FLACENCODERSYNTAX=flac # Specify encoder for FLAC
MPCENCODERSYNTAX=mpcenc # Specify encoder for Musepack
AACENCODERSYNTAX=fdkaac # Specify encoder for AAC
OPUSENCODERSYNTAX=opusenc # Specify encoder for Opus
WVENCODERSYNTAX=wavpack # Specify encoder for Wavpack
MKAENCODERSYNTAX=ffmpeg # Specify encoder for MKA (AC3 via FFmpeg)
# Specify the path to the selected encoder. In most cases the encoder
# should be in your $PATH as I illustrate below, otherwise you will
# need to specify the full path. For example: /usr/bin/lame
OGGENC=oggenc # Path to Ogg Vorbis encoder
LAME=lame # Path to MP3 encoder
FLAC=flac # Path to FLAC encoder
MPCENC=mpcenc # Path to Musepack encoder
FDKAAC=fdkaac # Path to the AAC encoder
OPUSENC=opusenc # Path to Opus encoder
WVENC=wavpack # Path to WavPack encoder
FFMPEG=ffmpeg # Path to FFmpeg (AC3 via FFmpeg)
# Specify your required encoding options here. Multiple options can
# be selected as '--preset standard --another-option' etc.
# The '-V 2' option gives VBR encoding between 170-210 kbits/s.
OGGENCOPTS='-q 6' # Options for Ogg Vorbis
LAMEOPTS='-V 2' # Options for MP3
FLACOPTS='-s -e -V -8' # Options for FLAC
MPCENCOPTS='--extreme' # Options for Musepack
FDKAACENCOPTS='-p 2 -m 5 -a 1' # Options for fdkaac
OPUSENCOPTS="--vbr --bitrate 128" # Options for Opus
WVENCOPTS="-hx3" # Options for WavPack
APENCOPTS="-c4000" # Options for Monkey's Audio
TTAENCOPTS="" # Options for True Audio
TWOLAMENCOPTS="--bitrate 320" # Options for MP2
FFMPEGENCOPTS="-c:a ac3 -b:a 448k" # Options for MKA (AC3 via FFmpeg)
# Output type for MP3.
OUTPUTTYPE="mp3,ogg,flac"
# The cd ripping program to use. There are a few choices here: cdda2wav,
# dagrab, cddafs (Mac OS X only) and flac. New to abcde 2.7 is 'libcdio'.
CDROMREADERSYNTAX=cdda2wav
# Give the location of the ripping program and pass any extra options,
# if using libcdio set 'CD_PARANOIA=cd-paranoia'.
CDPARANOIA=cdparanoia
CDPARANOIAOPTS="--never-skip=40"
# Give the location of the CD identification program:
CDDISCID=cd-discid
# Give the base location here for the encoded music files.
OUTPUTDIR="$HOME/Music"
# The default actions that abcde will take.
#ACTIONS=cddb,playlist,read,encode,tag,move,clean
ACTIONS=cddb,read,encode,tag,move,clean
# Decide here how you want the tracks labelled for a standard 'single-artist',
# multi-track encode and also for a multi-track, 'various-artist' encode:
OUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM} - ${TRACKFILE}'
VAOUTPUTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${TRACKNUM} - ${ARTISTFILE}-${TRACKFILE}'
# Decide here how you want the tracks labelled for a standard 'single-artist',
# single-track encode and also for a single-track 'various-artist' encode.
# (Create a single-track encode with 'abcde -1' from the commandline.)
ONETRACKOUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
VAONETRACKOUTPUTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${ALBUMFILE}'
# Create playlists for single and various-artist encodes. I would suggest
# commenting these out for single-track encoding.
PLAYLISTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}.m3u'
VAPLAYLISTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${ALBUMFILE}.m3u'
# This function takes out dots preceding the album name, and removes a grab
# bag of illegal characters. It allows spaces, if you do not wish spaces add
# in -e 's/ /_/g' after the first sed command.
mungefilename ()
{
echo "$@" | sed -e 's/^\.*//' | tr -d ":><|*/\"'?[:cntrl:]"
}
# What extra options?
MAXPROCS=8 # Run a few encoders simultaneously
PADTRACKS=y # Makes tracks 01 02 not 1 2
EXTRAVERBOSE=2 # Useful for debugging
COMMENT='ripped on Ubuntu using abcde' # Place a comment...
EJECTCD=y # Please eject cd when finished :-)
그리고 오디오북을 리핑할 때 확장하는 것
# Give the base location here for the encoded music files.
OUTPUTDIR="$HOME/Videos/Audiobooks"
# The default actions that abcde will take.
#### ACTIONS=cddb,playlist,read,encode,tag,move,clean
# Decide here how you want the tracks labelled for a standard 'single-artist',
# multi-track encode and also for a multi-track, 'various-artist' encode:
OUTPUTFORMAT='${OUTPUT}/${ARTISTFILE} - ${ALBUMFILE}/${TRACKNUM} - ${ARTISTFILE} - ${ALBUMFILE}'
VAOUTPUTFORMAT='${OUTPUT}/Various Artists/${ARTISTFILE} - ${ALBUMFILE}/${TRACKNUM} ${ARTISTFILE} - ${TRACKFILE}'
# [originalValues] OUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# [originalValues] VAOUTPUTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${TRACKNUM}.${ARTISTFILE}-${TRACKFILE}'
# Decide here how you want the tracks labelled for a standard 'single-artist',
# single-track encode and also for a single-track 'various-artist' encode.
# (Create a single-track encode with 'abcde -1' from the commandline.)
ONETRACKOUTPUTFORMAT='${OUTPUT}/${ARTISTFILE} - ${ALBUMFILE}/${TRACKNUM} - ${ARTISTFILE} - ${ALBUMFILE}'
VAONETRACKOUTPUTFORMAT='${OUTPUT}/Various Artists/${ARTISTFILE} - ${ALBUMFILE}/${TRACKNUM} ${ARTISTFILE} - ${TRACKFILE}'
# [originalValues] ONETRACKOUTPUTFORMAT='${OUTPUT}/${ARTISTFILE}-${ALBUMFILE}/${ALBUMFILE}'
# [originalValues] VAONETRACKOUTPUTFORMAT='${OUTPUT}/Various-${ALBUMFILE}/${ALBUMFILE}'
# Create playlists for single and various-artist encodes. I would suggest
# commenting these out for single-track encoding.
PLAYLISTFORMAT='${OUTPUT}/${ARTISTFILE} - ${ALBUMFILE}/${ALBUMFILE}.m3u'
VAPLAYLISTFORMAT='${OUTPUT}/${ARTISTFILE} - ${ALBUMFILE}/${ALBUMFILE}.m3u'
# This function takes out dots preceding the album name, and removes a grab
# bag of illegal characters. It allows spaces, if you do not wish spaces add
# in -e 's/ /_/g' after the first sed command.
mungefilename ()
{
echo "$@" | sed -e 's/^\.*//' | tr -d ":><|*/\"'?[:cntrl:]"
}
# What extra options?
MAXPROCS=2 # Run a few encoders simultaneously
PADTRACKS=y # Makes tracks 01 02 not 1 2
EXTRAVERBOSE=0 # Useful for debugging
COMMENT='ripped on Ubuntu using abcde' # Place a comment...
EJECTCD=y # Please eject cd when finished :-)
답변1
-W 스위치는 숫자여야 합니다(예: 01이 아닌 1).
abcde -c myAudiobookConfigFile.cfg -p -W 1
abcde -c myAudiobookConfigFile.cfg -p -W 2
abcde -c myAudiobookConfigFile.cfg -p -W ...
abcde -c myAudiobookConfigFile.cfg -p -W 9