저는 Linux를 실행하는 맞춤형 보드에서 소프트웨어를 개발 중입니다. 유선 연결에서 SSH를 통해 이 보드에 액세스합니다. 내 컴퓨터에 USB-이더넷 어댑터가 있고 이더넷 케이블이 이 맞춤형 보드에 연결됩니다. 매번 비밀번호를 입력할 필요가 없도록 SSH 키를 설정했습니다. 해당 보드와 인터넷을 공유하고 git pull을 실행하여 보드의 소프트웨어를 업데이트할 때까지는 모든 것이 잘 작동했습니다. (그건 잘 작동했지만). IP 주소를 다시 수동으로 변경하고 이전 IP를 다시 넣은 후 호스트가 변경된다는 경고를 받았습니다. 이것은 인터넷에서 가져온 것이므로 IP가 일치하지 않지만 다음과 같습니다.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that a host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
51:82:00:1c:7e:6f:ac:ac:de:f1:53:08:1c:7d:55:68.
Please contact your system administrator.
Add correct host key in /Users/isaacalves/.ssh/known_hosts to get rid of this message.
Offending RSA key in /Users/isaacalves/.ssh/known_hosts:12
RSA host key for 104.131.16.158 has changed and you have requested strict checking.
Host key verification failed.
SSH를 시도할 때 비밀번호를 묻는 메시지가 계속 표시됩니다.가장 특이한 부분비밀번호를 입력해도 승인되지 않는다는 것입니다. 올바른 비밀번호인지 어떻게 알 수 있나요? 저는 스크린을 사용하여 보드에 직렬로 연결하고 스크린을 통해 해당 비밀번호로 로그인했기 때문입니다. 그런 다음 화면을 통해 보드(호스트)에 액세스할 수 있습니다. 화면이 정말 느리고 vscode 및 기타 작업을 위해 ssh가 필요합니다.
내 컴퓨터에서 SSH 클라이언트를 제거하고 다시 설치하기도 했습니다. 아무것도 아님. 내 컴퓨터에서 Known_hosts 폴더를 제거했는데 도움이 되지 않았습니다. 호스트는 루프백이 아닌 자체 IP 주소로 SSH를 통해 연결할 수 있으므로 SSH 요청을 수락하고 있다고 생각합니다. (단락이 있고 자체 IP를 사용할 때 실제로 ssh를 사용하지 않는 한. 하지만 그럴 것 같아요).
필요한 경우 호스트 파일과 클라이언트 파일 모두에 액세스할 수 있습니다. 나는 일을 위해 3일 동안 이 문제에 갇혀 있었으므로 도움을 주시면 대단히 감사하겠습니다. 도움이 되는 내용은 생각나는 대로 포스팅하겠습니다.
SSH 시도:
ellis77@CB461-EE10955:~/.ssh$ ssh [email protected] -vvv
OpenSSH_8.2p1 Ubuntu-4ubuntu0.2, OpenSSL 1.1.1f 31 Mar 2020
debug1: Reading configuration data /home/ellis77/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 19: include /etc/ssh/ssh_config.d/*.conf matched no files
debug1: /etc/ssh/ssh_config line 21: Applying options for *
debug2: resolve_canonicalize: hostname 169.254.132.152 is address
debug2: ssh_connect_direct
debug1: Connecting to 169.254.132.152 [169.254.132.152] port 22.
debug1: Connection established.
debug1: identity file /home/ellis77/.ssh/id_rsa type 0
debug1: identity file /home/ellis77/.ssh/id_rsa-cert type -1
debug1: identity file /home/ellis77/.ssh/id_dsa type -1
debug1: identity file /home/ellis77/.ssh/id_dsa-cert type -1
debug1: identity file /home/ellis77/.ssh/id_ecdsa type -1
debug1: identity file /home/ellis77/.ssh/id_ecdsa-cert type -1
debug1: identity file /home/ellis77/.ssh/id_ecdsa_sk type -1
debug1: identity file /home/ellis77/.ssh/id_ecdsa_sk-cert type -1
debug1: identity file /home/ellis77/.ssh/id_ed25519 type -1
debug1: identity file /home/ellis77/.ssh/id_ed25519-cert type -1
debug1: identity file /home/ellis77/.ssh/id_ed25519_sk type -1
debug1: identity file /home/ellis77/.ssh/id_ed25519_sk-cert type -1
debug1: identity file /home/ellis77/.ssh/id_xmss type -1
debug1: identity file /home/ellis77/.ssh/id_xmss-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_8.2p1 Ubuntu-4ubuntu0.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_8.2p1 Ubuntu-4ubuntu0.2
debug1: match: OpenSSH_8.2p1 Ubuntu-4ubuntu0.2 pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to 169.254.132.152:22 as 'root'
debug3: hostkeys_foreach: reading file "/home/ellis77/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/ellis77/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 169.254.132.152
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c
debug2: host key algorithms: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,[email protected],rsa-sha2-512,rsa-sha2-256,ssh-rsa
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256
debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: compression ctos: none,[email protected]
debug2: compression stoc: none,[email protected]
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:DJTgdLuz5rpLWLc/y2M7YJMqKu8g77Orjn3CyoRreoU
debug3: hostkeys_foreach: reading file "/home/ellis77/.ssh/known_hosts"
debug3: record_hostkey: found key type ECDSA in file /home/ellis77/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys from 169.254.132.152
debug1: Host '169.254.132.152' is known and matches the ECDSA host key.
debug1: Found key in /home/ellis77/.ssh/known_hosts:1
debug3: send packet: type 21
debug2: set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: SSH2_MSG_NEWKEYS received
debug2: set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug1: Will attempt key: /home/ellis77/.ssh/id_rsa RSA SHA256:rk0afdhz18RlnxGQ0ejIyPKXNUnLvHDEv3BTu9u1kLY agent
debug1: Will attempt key: /home/ellis77/.ssh/id_dsa
debug1: Will attempt key: /home/ellis77/.ssh/id_ecdsa
debug1: Will attempt key: /home/ellis77/.ssh/id_ecdsa_sk
debug1: Will attempt key: /home/ellis77/.ssh/id_ed25519
debug1: Will attempt key: /home/ellis77/.ssh/id_ed25519_sk
debug1: Will attempt key: /home/ellis77/.ssh/id_xmss
debug2: pubkey_prepare: done
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,[email protected],ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected]>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/ellis77/.ssh/id_rsa RSA SHA256:rk0afdhz18RlnxGQ0ejIyPKXNUnLvHDEv3BTu9u1kLY agent
debug3: send packet: type 50
debug2: we sent a publickey packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /home/ellis77/.ssh/id_dsa
debug3: no such identity: /home/ellis77/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /home/ellis77/.ssh/id_ecdsa
debug3: no such identity: /home/ellis77/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /home/ellis77/.ssh/id_ecdsa_sk
debug3: no such identity: /home/ellis77/.ssh/id_ecdsa_sk: No such file or directory
debug1: Trying private key: /home/ellis77/.ssh/id_ed25519
debug3: no such identity: /home/ellis77/.ssh/id_ed25519: No such file or directory
debug1: Trying private key: /home/ellis77/.ssh/id_ed25519_sk
debug3: no such identity: /home/ellis77/.ssh/id_ed25519_sk: No such file or directory
debug1: Trying private key: /home/ellis77/.ssh/id_xmss
debug3: no such identity: /home/ellis77/.ssh/id_xmss: No such file or directory
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
[email protected]'s password:
올바른 비밀번호를 입력한 후(묻지 않아야 함):
[email protected]'s password:
debug3: send packet: type 50
debug2: we sent a password packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: publickey,password
Permission denied, please try again.
[email protected]'s password:
다음은 호스트의 sshd_config 파일의 일부입니다. 참고 비밀번호 인증이 현재 켜져 있는데, 이를 끄고 ssh 서비스를 다시 시작했지만 여전히 요청합니다.
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
# Logging
SyslogFacility AUTH
LogLevel VERBOSE
# Authentication:
#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no
마지막으로 두 SSH 디렉터리의 권한은 다음과 같습니다. 클라이언트:
drwxrwxr-x 2 ellis77 ellis77 4096 Jun 17 10:08 .
drwxr-xr-x 27 ellis77 ellis77 4096 Jun 17 09:58 ..
-rw-r--r-- 1 ellis77 ellis77 0 Jun 17 10:07 config
-rw------- 1 ellis77 ellis77 2610 Jun 17 09:59 id_rsa
-rw------- 1 ellis77 ellis77 575 Jun 17 09:59 id_rsa.pub
-rw-r--r-- 1 ellis77 ellis77 222 Jun 17 10:08 known_hosts
주인:
drwxr-xr-x 2 root root 4096 Sep 14 2020 .
drwxr-xr-x 38 root root 4096 Jun 15 13:01 ..
-rw-r--r-- 1 root root 525809 Aug 31 2020 moduli
-rw-r--r-- 1 root root 1484 Sep 15 2020 ssh_config
-rw------- 1 root root 1381 Sep 14 2020 ssh_host_dsa_key
-rw-r--r-- 1 root root 600 Sep 14 2020 ssh_host_dsa_key.pub
-rw------- 1 root root 505 Sep 14 2020 ssh_host_ecdsa_key
-rw-r--r-- 1 root root 172 Sep 14 2020 ssh_host_ecdsa_key.pub
-rw------- 1 root root 399 Sep 14 2020 ssh_host_ed25519_key
-rw-r--r-- 1 root root 92 Sep 14 2020 ssh_host_ed25519_key.pub
-rw------- 1 root root 2590 Sep 14 2020 ssh_host_rsa_key
-rw-r--r-- 1 root root 564 Sep 14 2020 ssh_host_rsa_key.pub
-rw-r--r-- 1 root root 3126
미리 감사드립니다. 그 밖에 필요한 것이 있으면 기꺼이 제공해 드리겠습니다.
마지막으로 호스트 IP를 확인하려면 다음을 수행하십시오.
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 169.254.132.152 netmask 255.255.0.0 broadcast 169.254.255.255
inet6 fe80::20a:35ff:fe00:122 prefixlen 64 scopeid 0x20<link>
ether 00:0a:35:00:01:22 txqueuelen 1000 (Ethernet)
RX packets 1 bytes 46 (46.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 381 bytes 16730 (16.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 27 base 0xb000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 212 bytes 18477 (18.0 KiB)
편집: 랩톱에 키가 설정되지 않은 상태에서 랩톱으로 SSH에 로그인했는데 암호가 허용되었습니다. 그래서 문제는 내 작업 기계에 있는 것 같습니다.
답변1
그래서 그것은 매우 어리석었지만 미묘했습니다. 보드와 인터넷을 공유하고 dhcpcd를 실행한 후 USB 이더넷 연결의 IP 주소를 다시 수동 모드로 설정하고 주소를 169.254.132.152로 설정했습니다.보드와 동일SSH를 시도하고있었습니다. 신인의 실수. 네트 마스크로 마스킹한 후 동일해지는 방식으로 다른 주소여야 합니다(예: 169.254.132.150). 그런 다음 우리는 동일한 마스크에 있지만 동일한 주소를 호깅하지 않습니다. 이는 내가 핑을 할 수 있는 이유와 보드가 아닌 연결에 SSH로 연결했기 때문에 "비밀번호"가 허용되지 않는 이유를 설명합니다.
팁: 연결의 IP 주소를 변경할 때 USB를 뽑았다가 다시 연결하면 업데이트됩니다.