나는 언급된 지침을 따르려고 노력했습니다.여기Ubuntu 20.04.2 LTS 시스템에서 최대 절전 모드를 활성화하려면
그러나 아래에서 볼 수 있듯이 fstab 파일에서 스왑 라인이 uuid를 제공하지 않기 때문에 그렇게 할 수 없었습니다.
GNU nano 4.8 /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/vgubuntu-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/nvme0n1p2 during installation
UUID=86a29cef-7076-4d45-9d5c-08065fd3e3fb /boot ext4 defaults >
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=6B80-CFF9 /boot/efi vfat umask=0077 0 1
/dev/mapper/vgubuntu-swap_1 none swap sw 0 0
GNU nano 4.8 /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/mapper/vgubuntu-root / ext4 errors=remount-ro 0 1
# /boot was on /dev/nvme0n1p2 during installation
UUID=86a29cef-7076-4d45-9d5c-08065fd3e3fb /boot ext4 defaults >
# /boot/efi was on /dev/nvme0n1p1 during installation
UUID=6B80-CFF9 /boot/efi vfat umask=0077 0 1
/dev/mapper/vgubuntu-swap_1 none swap sw 0 0
누구든지 권장 사항이 있습니까?