저는 최근 20.04 LTS를 실행하는 HP EliteBook Folio 9470M용 BT04 BT04XL 배터리 교체품을 구입했습니다. 배터리가 인식되고 플러그를 뽑으면 전원이 방전되지만 나중에 재충전하려면(노트북을 다시 연결했을 때) 먼저 배터리를 노트북에서 제거(연결 해제)한 다음 다시 설치해야 합니다. 다시 연결하면 배터리가 정상적으로 충전됩니다.
어떤 아이디어가 있나요?
필수 배터리 정보...
upower -i `upower -e | grep 'BAT'`
native-path: BAT0
vendor: Hewlett-Packard
model: Primary
serial: 03110 2021/03/03
power supply: yes
updated: Fri 02 Jul 2021 08:22:23 AM EDT (44 seconds ago)
has history: yes
has statistics: yes
battery
present: yes
rechargeable: yes
state: fully-charged
warning-level: none
energy: 56.1312 Wh
energy-empty: 0 Wh
energy-full: 59.5008 Wh
energy-full-design: 59.5008 Wh
energy-rate: 1.4688 W
voltage: 17.294 V
percentage: 94%
capacity: 100%
technology: lithium-ion
icon-name: 'battery-full-charged-symbolic'
acpi -V
Battery 0: Unknown, 94%
Battery 0: design capacity 4132 mAh, last full capacity 4132 mAh = 100%
Adapter 0: on-line
Thermal 0: ok, 24.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 0: trip point 1 switches to mode passive at temperature 55.0 degrees C
Thermal 1: ok, 0.0 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 1: trip point 1 switches to mode passive at temperature 108.0 degrees C
Thermal 2: ok, 39.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 3: ok, 127.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 4: ok, 52.0 degrees C
Thermal 4: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 4: trip point 1 switches to mode hot at temperature 104.0 degrees C
Thermal 5: ok, 40.0 degrees C
Thermal 5: trip point 0 switches to mode critical at temperature 128.0 degrees C
Cooling 0: Processor 0 of 10
Cooling 1: x86_pkg_temp no state information available
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: intel_powerclamp no state information available
Cooling 5: Processor 0 of 10