우분투 10.04에서 작업 중입니다. 새 컴퓨터를 구입하고 여기에 Ubuntu 10.04를 설치했습니다.
그러나 xrandr을 사용하고 xorg.conf를 수정하여 해상도를 높이는 등 인터넷에서 찾은 많은 방법을 시도했지만 결국 실패하고 800x600만 작동합니다.
1920x1080이 되길 원합니다.
어떻게 해야 하나요?
감사합니다.
이것이 lspci -vnn에서 얻은 것입니다:
00:00.0 Host bridge [0600]: Intel Corporation Device [8086:0100] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Sandy Bridge PCI Express Root Port [8086:0101] (rev 09)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f8000000-fb0fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000bfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller [0780]: Intel Corporation Cougar Point HECI Controller #1 [8086:1c3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fb307000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fb306000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:8444]
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fb300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 1 [8086:1c10] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 2 [8086:1c12] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 3 [8086:1c14] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 4 [8086:1c16] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fb200000-fb2fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 5 [8086:1c18] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation Cougar Point PCI Express Root Port 6 [8086:1c1a] (rev b5)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fb100000-fb1fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation Cougar Point USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fb305000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Device [8086:1c5c] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation Cougar Point 4 port SATA IDE Controller [8086:1c00] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at f0d0 [size=8]
I/O ports at f0c0 [size=4]
I/O ports at f0b0 [size=8]
I/O ports at f0a0 [size=4]
I/O ports at f090 [size=16]
I/O ports at f080 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation Cougar Point SMBus Controller [8086:1c22] (rev 05)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: medium devsel, IRQ 10
Memory at fb304000 (64-bit, non-prefetchable) [size=256]
I/O ports at f000 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation Cougar Point 2 port SATA IDE Controller [8086:1c08] (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at f070 [size=8]
I/O ports at f060 [size=4]
I/O ports at f050 [size=8]
I/O ports at f040 [size=4]
I/O ports at f030 [size=16]
I/O ports at f020 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1)
Subsystem: nVidia Corporation Device [10de:070e]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at a0000000 (64-bit, prefetchable) [size=512M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at e000 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia-173, nvidiafb, nouveau
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Flags: bus master, fast devsel, latency 0, IRQ 31
I/O ports at d000 [size=256]
Memory at c0004000 (64-bit, prefetchable) [size=4K]
Memory at c0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:00.0 USB Controller [0c03]: Device [1b21:1042] (prog-if 30)
Subsystem: ASUSTeK Computer Inc. Device [1043:8488]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fb200000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci
07:00.0 SATA controller [0106]: Device [1b21:0612] (rev 01) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:84b7]
Flags: bus master, fast devsel, latency 0, IRQ 32
I/O ports at c050 [size=8]
I/O ports at c040 [size=4]
I/O ports at c030 [size=8]
I/O ports at c020 [size=4]
I/O ports at c000 [size=32]
Memory at fb100000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
답변1
Ubuntu 10.04 Lucid Lynx에는 Intel Sandy Bridge 플랫폼에 대한 드라이버 지원이 없습니다. Lucid가 출시된 지 거의 1년 후에 출시되었기 때문입니다.
전체 Sandy Bridge 지원이 이 버전에 추가되었으므로 Ubuntu 11.04 Natty Narwhal 또는 Linux 커널 버전 2.6.38 이상을 제공하는 배포판으로 업그레이드하는 것이 좋습니다.
그만큼Ubuntu 커널 팀은 PPA에서 Lucid용 Linux 커널의 최신 버전을 제공합니다., 그러나 그들의 웹사이트에서는 "당신의 새끼 고양이가 모두 죽더라도 커널 팀에 울지 마세요."라고 경고합니다. 와 결합하여최신 X Intel 드라이버, Lucid에서 Sandy Bridge를 지원하게 될 것입니다. 설치하려면 다음 명령을 실행하십시오.
sudo apt-add-repostiory ppa:kernel-ppa/ppa
sudo apt-add-repository ppa:ubuntu-x-swat/x-updates
sudo apt-get install linux-lts-backport-oneric
sudo apt-get dist-upgrade